From: Jason Liu r64343@freescale.com
This patchset adds Freescale i.mx51 device tree support. This is based on
git://git.secretlab.ca/git/linux-2.6 devicetree/test
This patch has been tested on MX51 babbage board and can boot up succesfully to linux console with DT enabled.
Grant, I think it's almost ready for you to merge it.
V5: - Add bidings for uart and fec - resolve s-o-b issue - move dt clock part to seperate file
V4: - Add Linaro sign off and copyrightt
V3: - prefix the property name with the vendor name as like: "fsl,has-rts-cts" and "fsl,irda-mode" - use the ttymxc0 as the console - add FEC support, nfs can be used now
Jason Liu (4): arm/dt: add basic mx51 device tree support arm/dt: add very basic dts file for babbage board serial/imx: parse from device tree support net/fec: add device tree matching support
.../devicetree/bindings/net/fsl-imx-fec.txt | 17 +++ .../bindings/tty/serial/fsl-imx-uart.txt | 19 +++ arch/arm/boot/dts/babbage.dts | 122 ++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 8 ++ arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/board-dt.c | 64 ++++++++++ arch/arm/mach-mx5/clock-dt.c | 52 +++++++++ arch/arm/plat-mxc/include/mach/common.h | 1 + drivers/net/fec.c | 17 +++ drivers/tty/serial/imx.c | 78 +++++++++++-- 10 files changed, 369 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/fsl-imx-fec.txt create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt create mode 100644 arch/arm/boot/dts/babbage.dts create mode 100644 arch/arm/mach-mx5/board-dt.c create mode 100644 arch/arm/mach-mx5/clock-dt.c