Hello Torben,
I can provide the instructions how to use the MFG-Tool.
Please note, that this tool works in Windows and not Linux and that I am not completely aware, in which state you will receive this tool from Freescale (I cannot provide the tool, please ask FSL to receive it). I will describe the steps based on my installation.
Please read them carefully until the end, before you execute them.
- Connect the SabreLite via the USB-OTG port to your PC and start the MFG-Tool - In the left bottom corner of the MFG-tool main window you will find the status information field containing Profile, status, version. - Click "Scan devices" (most likely nothing will be found) - Choose Options->Configuration...->USB-Ports and search for something like "Linux-File-Stor..." or "HID-device..." or similar and check this device - Choose Options->Configuration...->Profiles and check the right bootloader from "Options". It could be something like "Sabre-lite-SPI_NOR-1" [1] - Afterwards press the green start button on the right bottom corner and wait until the action is complete. - In the end insert the SD-Card created with lmc or whatever, unplug the board from the OTG-port and boot the board as normally.
Please note: This description comes without any warranty. In case of any open questions please do not hesitate to contact me.
[1] The bootloader of your choice can be identified from the config-file in the installation directory: - Open <install_Dir>\Profiles\MX6Q Linux Update\OS Firmware\ucl.xml with your favorite editor - Search for the bootloader name which is something like "MX6_SPI_to_SD_loader.bin" and check the name which will be showed in the Options column which could be e.g. name="Sabre-lite-SPI_NOR-1"
Best regards, Philipp ---
-----Original Message----- From: linaro-dev-bounces@lists.linaro.org [mailto:linaro-dev- bounces@lists.linaro.org] On Behalf Of Dirk Behme Sent: Sonntag, 20. Mai 2012 18:39 To: Torben Zeleny Cc: Richard Zhao; linaro-dev@lists.linaro.org Subject: Re: Manufacturing tool for MX6QSabreLite
On 18.05.2012 15:35, Torben Zeleny wrote:
Dear Linaro-Dev-Team,
we tried to getting started with the Freescale i.MX6Q Sabre Lite Boardand have some errors that you have mentioned at your homepage https://wiki.linaro.org/Boards/MX6QSabreLite: "In case you somehow do not succeed with this procedure you will
have
to use the manufacturing tool in order to reflash the SPI-NOR. In
that
case please let me know and I can send you instructions how to
program
the new loader with the manufacturing tool." Please send us the instructions. Thank you.
Do you have the manufacturing tool for i.MX6? Or do you just need the instructions?
Best regards
Dirk
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev