Re: How to involve into the linaro development

On Fri, Aug 27, 2010 at 8:00 AM, nvhariharan@gmail.com wrote:

Hi, Thanks for allowing me to start my contributions. I have downloaded 23/08/10 daily packages and put the binaries into MMC and boot the system. It was hanging in the U-Boot after I2C ready console print.

My beagle board is Rev C4.

Common problem with upgrading to X-loader 1.4.4ss and u-boot 2010-03+

Your board has an older X-loader installed (factory 1.4.2 probally), with MLO and u-boot.bin on the fat partition you need to hold down the user button to get to u-boot prompt.. Once there reflash the MLO and u-boot.bin..

U-boot Commands: http://elinux.org/BeagleBoardUbuntu#Manual_Run

Regards,