On a Pandaboard connecting to a DVI monitor via an HDMI to DVI converter cable, the monitor will remain blank after the board boots up and a "ps" shows normal Android applications have been running.
The same problem was with earlier Pandroid releases but with the latest L27.12.1-P2-pandroid_v2 the DVI monitor is working on the same hardware setup.
Andy
On Sat, Jul 9, 2011 at 11:07 PM, Zach Pfeffer zach.pfeffer@linaro.orgwrote:
All,
I'm happy to announce the first 11.07 build for generic Panda and Beagle C4. Unfortunately Beagle xM doesn't boot, but Panda and Beagle C4 look great!
https://android-build.linaro.org/builds/~linaro-android/beagle-11.07-release...
https://android-build.linaro.org/builds/~linaro-android/panda-11.07-release/
I'm using a only tracking tip approach, which should align with our new CI push. As the tip's stabilize I'm going to advance the release. This way people will have a bleeding edge build and a stable build.
Many, many, many thanks to John Stultz and Nicolas Pitre whose diligent work on 2.6.39 we were able to pick up.
This release differs from 11.06 in:
Linaro 2.6.39 HDMI comes up in the best resolution (no more 640x480 for the upstream focused build).
I don't like the term generic build so I'm calling these upstream-focused builds.
The next jump will be to 3.0.
As always docs are at:
Image Install https://wiki.linaro.org/Platform/Android/ImageInstallation
Other Docs https://wiki.linaro.org/Platform/Android https://wiki.linaro.org/Platform/Android/GetSource https://wiki.linaro.org/Platform/Android/BuildSource
These builds can be tried immediately with:
Panda:
wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_panda-11.07-rele... wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_panda-11.07-rele... wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_panda-11.07-rele... bzr branch lp:linaro-image-tools ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdd --dev panda --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2
Beagle
wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_beagle-11.07-rel... wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_beagle-11.07-rel... wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_beagle-11.07-rel... bzr branch lp:linaro-image-tools ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdd --dev beagle --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2
-Zach