Possibly a kernel bug? Lee, anything on snowball that would cause it to not go through with the reboot when on usb power?
Thanks, Paul Larson
On Tue, Dec 13, 2011 at 9:50 AM, Dave Pigott dave.pigott@linaro.org wrote:
Hi all,
Sorry for the wide distribution, but I've got a rather curious problem.
I'm trying to get a Snowball V11 PDK working in the validation lab, and the only way to get it to boot on power-on is to power it over USB and control the power through a USB power adaptor. While this works admirably, the problem is that when I try to soft-reboot I get the usual:
Broadcast message from root@master (/dev/ttyAMA2) at 15:48 ...
The system is going down for reboot NOW!
- Asking all remaining processes to terminate... [
OK ]
- All processes ended within 1 seconds.... [
OK ]
- Deconfiguring network interfaces... [
OK ]
- Deactivating swap... [
OK ] umount: /run/lock: not mounted
- Will now restart
[ 1279.346801] Restarting system.
and then nothing. It just hangs and never comes back until I power cycle it.
BTW: Sometimes I get the whole of the "Restarting system" message, sometimes just half of it.
Has anybody any idea why this might be the case and, if so, what I can do about it?
Thanks
Dave
Dave Pigott Validation Engineer T: +44 1223 45 00 24 | M +44 7940 45 93 44 Linaro.org http://www.linaro.org/* **│ *Open source software for ARM SoCs**** Follow *Linaro: *Facebook http://www.facebook.com/pages/Linaro | Twitterhttp://twitter.com/#%21/linaroorg | Blog http://www.linaro.org/linaro-blog/
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev