I've got a tobi board with HDMI, I just put in the ALIP image and plugged it into my TV for the first time, but I get nothing (but I'm also plugged in via serial and see that it boots completely).
So I try X -configure
and I get No devices to configure. Configuration failed. ddxSigGiveUp: Closing log
I googled a bit, but I must not have the right terms. It's been years since I've had to configure X. Is there some special setup or a tutorial for this?
AJ ONeal
Which hwpack are you using?
On Fri, Sep 16, 2011 at 10:26 PM, AJ ONeal coolaj86@gmail.com wrote:
I've got a tobi board with HDMI, I just put in the ALIP image and plugged it into my TV for the first time, but I get nothing (but I'm also plugged in via serial and see that it boots completely). So I try X -configure and I get No devices to configure. Configuration failed. ddxSigGiveUp: Closing log I googled a bit, but I must not have the right terms. It's been years since I've had to configure X. Is there some special setup or a tutorial for this? AJ ONeal
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
Hi AJ, What expansion board and revision are you using? The i2c lines supporting EDID aren't available on some older revisions of Tobi and this causes the display initialization to fail on some hwpacks I've tried. -Ash On Sep 16, 2011 10:10 PM, "Tom Gall" tom.gall@linaro.org wrote:
Which hwpack are you using?
On Fri, Sep 16, 2011 at 10:26 PM, AJ ONeal coolaj86@gmail.com wrote:
I've got a tobi board with HDMI, I just put in the ALIP image and plugged
it
into my TV for the first time, but I get nothing (but I'm also plugged in via serial and see that it boots completely). So I try X -configure and I get No devices to configure. Configuration failed. ddxSigGiveUp: Closing log I googled a bit, but I must not have the right terms. It's been years since I've had to configure X. Is there some special setup or a tutorial for this? AJ ONeal
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
-- Regards, Tom
"We want great men who, when fortune frowns will not be discouraged."
- Colonel Henry Knox
Linaro.org │ Open source software for ARM SoCs w) tom.gall att linaro.org w) tom_gall att vnet.ibm.com h) tom_gall att mac.com
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
On 09/16/2011 10:26 PM, AJ ONeal wrote:
I've got a tobi board with HDMI, I just put in the ALIP image and plugged it into my TV for the first time, but I get nothing (but I'm also plugged in via serial and see that it boots completely).
The Tobi (at least mine) only has DVI-D output. The jack is HDMI and you use an HDMI cable. However, there's a converter[1] you then attach to the other end before plugging into the DVI connection of your display.
Tom, Ash,
HWPACK http://releases.linaro.org/platform/linaro-n/hwpacks/latest/hwpack_linaro-ov...
ALIP http://releases.linaro.org/platform/linaro-n/alip/latest/alip-n-tar-20110823...
Tobi BRD30002C-R3085 (btw, it's missing from http://pubs.gumstix.com/boards/TOBI/)
What about the Chestnut43 with LCD? Should that work out-of-box? I bought it a few months ago - same time as the Tobis.
The Overos I'm using are probably a year old or so.
Andy,
I assume that the only difference between the monster cable and the one I have [0] is $32. I've got the Sony GoogleTV. I think it only has HDMI, so I'll have to try it against a monitor.
AJ ONeal
On Sat, Sep 17, 2011 at 9:07 AM, Andy Doan andy.doan@linaro.org wrote:
On 09/16/2011 10:26 PM, AJ ONeal wrote:
I've got a tobi board with HDMI, I just put in the ALIP image and plugged
it
into my TV for the first time, but I get nothing (but I'm also plugged in via serial and see that it boots completely).
The Tobi (at least mine) only has DVI-D output. The jack is HDMI and you use an HDMI cable. However, there's a converter[1] you then attach to the other end before plugging into the DVI connection of your display.
Hi AJ,
On Sat, Sep 17, 2011 at 10:14 AM, AJ ONeal coolaj86@gmail.com wrote:
HWPACK http://releases.linaro.org/platform/linaro-n/hwpacks/latest/hwpack_linaro-ov... ALIP http://releases.linaro.org/platform/linaro-n/alip/latest/alip-n-tar-20110823...
Yes---these releases work fine for me with Tobi+attached HDMI/DVI-D monitor. In fact, DVI-D is the only video output from a Tobi board.
Does the Overo+Tobi+Monitor combination start up with a Angstrom based image?
Tobi BRD30002C-R3085 (btw, it's missing from http://pubs.gumstix.com/boards/TOBI/)
Thanks for letting me know that this is missing---this schematic should really be available so I'll check into it.
What about the Chestnut43 with LCD? Should that work out-of-box? I bought it a few months ago - same time as the Tobis.
You may have to set the omapdss.def_disp=lcd43 parameter but it does work.
-Ash
Hi AJ,
On Sun, Sep 18, 2011 at 11:46 AM, Ash Charles ash@gumstix.com wrote:
Thanks for letting me know that this is missing---this schematic should really be available so I'll check into it.
I've posted the schematic: http://pubs.gumstix.com/boards/TOBI/PCB30002-R3085/
-Ash
-
AJ ONeal -
Andy Doan -
Ash Charles -
Ash Charles -
Tom Gall