Hello,
This is my first attempt with the Linaro kernel build and I am having no success in getting it build. My aim is to get a kernel debian package build using the upstream changes. I am following the instructions given at https://wiki.linaro.org/Resources/HowTo/PackageYourOwnKernel.
I get quite a number of errors. I have attached one of them to the mail as well.
Can someone let me know if this is the right wiki to follow the upstream kernel packaging? Also, I dont find the arch/arm/configs/omap3_defconfig configuration file shown in one of the steps. Can I know how to get the same?
Is there a different approach to get the kernel debian package ?
Thanks in advance!!! Regards, Deepti.
Hi Deepti,
On 06/13/2011 12:22 PM, Deepti Kalakeri wrote:
Hello,
This is my first attempt with the Linaro kernel build and I am having no success in getting it build. My aim is to get a kernel debian package build using the upstream changes. I am following the instructions given at https://wiki.linaro.org/Resources/HowTo/PackageYourOwnKernel.
Can you check this link again? I reformatted and fixed some on the errors on this page late Friday. I think some of the problems you encountered are fixed.
I get quite a number of errors. I have attached one of them to the mail as well.
AIUI, the config errors you listed need to be fixed by going through the kernel configuration and enabling or disabling these options as requested. So in the first example from the failure log you sent:
check-config: FAIL: value CONFIG_DEVKMEM n
means CONFIG_DEVKMEM is disabled when it should be enabled. So using "fdr editconfigs" you need to find and change that configuration option.
When I tried this on Friday I had to run this step a few times because of kernel dependencies. The process is outlined in these sections:
Update Your Kernel Config Fix-up Your Kernel Config Bypass Remaining Config Errors
HTH, Matt
Can someone let me know if this is the right wiki to follow the upstream kernel packaging? Also, I dont find the arch/arm/configs/omap3_defconfig configuration file shown in one of the steps. Can I know how to get the same?
Is there a different approach to get the kernel debian package ?
Thanks in advance!!! Regards, Deepti.
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
On Mon, 13 Jun 2011 15:31:21 -0600, Matt Waddel matt.waddel@canonical.com wrote:
AIUI, the config errors you listed need to be fixed by going through the kernel configuration and enabling or disabling these options as requested. So in the first example from the failure log you sent:
check-config: FAIL: value CONFIG_DEVKMEM n
means CONFIG_DEVKMEM is disabled when it should be enabled. So using "fdr editconfigs" you need to find and change that configuration option.
When I tried this on Friday I had to run this step a few times because of kernel dependencies. The process is outlined in these sections:
Update Your Kernel Config Fix-up Your Kernel Config Bypass Remaining Config Errors
This doesn't really work for us as we need to do this daily in an automated fashion.
Is there a way to use the defconfigs for this kernel build?
To look in to another way I had heard of, "make deb" (which turned out to be "make deb-pkg"), I just tried this:
sudo apt-get install gcc-arm-linux-gnueabi git clone git://git.linaro.org/kernel/linux-linaro-2.6.38.git cd linux-linaro-2.6.38/ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap4_defconfig make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- deb-pkg
which then dies with
INSTALL include/asm (32 files) CHECK include/asm-generic (34 files) CHECK include/drm (14 files) /tmp/linux-linaro-2.6.38/usr/include/drm/drm_mode.h:85: found __[us]{8,16,32,64} type without #include <linux/types.h> /tmp/linux-linaro-2.6.38/usr/include/drm/i915_drm.h:120: found __[us]{8,16,32,64} type without #include <linux/types.h> /tmp/linux-linaro-2.6.38/usr/include/drm/mga_drm.h:260: found __[us]{8,16,32,64} type without #include <linux/types.h> /tmp/linux-linaro-2.6.38/usr/include/drm/radeon_drm.h:758: found __[us]{8,16,32,64} type without #include <linux/types.h> /tmp/linux-linaro-2.6.38/usr/include/drm/via_drm.h:117: found __[us]{8,16,32,64} type without #include <linux/types.h> CHECK include/linux/byteorder (2 files) CHECK include/linux/caif (2 files) CHECK include/linux/can (4 files) CHECK include/linux/dvb (8 files) CHECK include/linux/hdlc (1 files) CHECK include/linux/isdn (1 files) CHECK include/linux/netfilter (64 files) CHECK include/linux/netfilter_arp (2 files) CHECK include/linux/netfilter_bridge (18 files) CHECK include/linux/netfilter_ipv4 (14 files) CHECK include/linux/netfilter_ipv6 (11 files) CHECK include/linux/nfsd (6 files) CHECK include/linux/raid (2 files) CHECK include/linux/spi (1 files) CHECK include/linux/sunrpc (1 files) CHECK include/linux/tc_act (7 files) CHECK include/linux/tc_ematch (4 files) CHECK include/linux/usb (9 files) CHECK include/linux/wimax (1 files) CHECK include/linux (360 files) /tmp/linux-linaro-2.6.38/usr/include/linux/kernel.h:58: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:23: included file 'linux/module.h' is not exported /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:46: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:47: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:52: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:54: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:56: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:60: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:64: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/quota.h:175: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/sdla.h:116: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/soundcard.h:1054: userspace cannot reference function or variable defined in the kernel make[4]: *** [/tmp/linux-linaro-2.6.38/usr/include/linux/.check] Error 123 make[3]: *** [linux] Error 2 make[2]: *** [headers_check] Error 2 make[1]: *** [deb-pkg] Error 2 make: *** [deb-pkg] Error 2
What's the fix for that?
Thanks,
James
Hi,
I just tried .39 and there's no OMAP4, so the headers install if I use the omap2plus_defconfig.
I was then able to get deb-pkg to work after a fix to allow cross-building the package.
This seems to produce something reasonable for us to use, but it may be more robust to use the defconfigs with the PackageYourOwnKernel solution.
Thanks,
James
P.S. here's the hacky change to support cross build deb-pkg
diff --git a/scripts/package/builddeb b/scripts/package/builddeb index f6cbc3d..ea33db3 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -12,6 +12,43 @@
set -e
+# Attempt to find the correct Debian architecture +forcearch="" +debarch="" +case "$UTS_MACHINE" in +i386|ia64|alpha) + debarch="$UTS_MACHINE" ;; +x86_64) + debarch=amd64 ;; +sparc*) + debarch=sparc ;; +s390*) + debarch=s390 ;; +ppc*) + debarch=powerpc ;; +parisc*) + debarch=hppa ;; +mips*) + debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y .config && echo el) ;; +arm*) + debarch=arm$(grep -q CONFIG_AEABI=y .config && echo el) ;; +*) + echo "" >&2 + echo "** ** ** WARNING ** ** **" >&2 + echo "" >&2 + echo "Your architecture doesn't have it's equivalent" >&2 + echo "Debian userspace architecture defined!" >&2 + echo "Falling back to using your current userspace instead!" >&2 + echo "Please add support for $UTS_MACHINE to ${0} ..." >&2 + echo "" >&2 +esac +if [ -z "$KBUILD_DEBARCH" ] ; then + debarch="$KBUILD_DEBARCH" +fi +if [ -n "$debarch" ] ; then + forcearch="-DArchitecture=$debarch" +fi + create_package() { local pname="$1" pdir="$2"
@@ -25,42 +62,6 @@ create_package() { chown -R root:root "$pdir" chmod -R go-w "$pdir"
- # Attempt to find the correct Debian architecture - local forcearch="" debarch="" - case "$UTS_MACHINE" in - i386|ia64|alpha) - debarch="$UTS_MACHINE" ;; - x86_64) - debarch=amd64 ;; - sparc*) - debarch=sparc ;; - s390*) - debarch=s390 ;; - ppc*) - debarch=powerpc ;; - parisc*) - debarch=hppa ;; - mips*) - debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y .config && echo el) ;; - arm*) - debarch=arm$(grep -q CONFIG_AEABI=y .config && echo el) ;; - *) - echo "" >&2 - echo "** ** ** WARNING ** ** **" >&2 - echo "" >&2 - echo "Your architecture doesn't have it's equivalent" >&2 - echo "Debian userspace architecture defined!" >&2 - echo "Falling back to using your current userspace instead!" >&2 - echo "Please add support for $UTS_MACHINE to ${0} ..." >&2 - echo "" >&2 - esac - if [ -n "$KBUILD_DEBARCH" ] ; then - debarch="$KBUILD_DEBARCH" - fi - if [ -n "$debarch" ] ; then - forcearch="-DArchitecture=$debarch" - fi - # Create the package dpkg-gencontrol -isp $forcearch -p$pname -P"$pdir" dpkg --build "$pdir" .. @@ -246,15 +247,14 @@ mkdir -p "$destdir" (cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -) (cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf -) rm -f /tmp/files$$ /tmp/objfiles$$ -arch=$(dpkg --print-architecture)
cat <<EOF >> debian/control
Package: $kernel_headers_packagename Provides: linux-headers, linux-headers-2.6 -Architecture: $arch -Description: Linux kernel headers for $KERNELRELEASE on $arch - This package provides kernel header files for $KERNELRELEASE on $arch +Architecture: $debarch +Description: Linux kernel headers for $KERNELRELEASE on $debarch + This package provides kernel header files for $KERNELRELEASE on $debarch . This is useful for people who need to build external modules EOF
On Mon, 13 Jun 2011 21:14:09 -0400, James Westby james.westby@linaro.org wrote:
On Mon, 13 Jun 2011 15:31:21 -0600, Matt Waddel matt.waddel@canonical.com wrote:
AIUI, the config errors you listed need to be fixed by going through the kernel configuration and enabling or disabling these options as requested. So in the first example from the failure log you sent:
check-config: FAIL: value CONFIG_DEVKMEM n
means CONFIG_DEVKMEM is disabled when it should be enabled. So using "fdr editconfigs" you need to find and change that configuration option.
When I tried this on Friday I had to run this step a few times because of kernel dependencies. The process is outlined in these sections:
Update Your Kernel Config Fix-up Your Kernel Config Bypass Remaining Config Errors
This doesn't really work for us as we need to do this daily in an automated fashion.
Is there a way to use the defconfigs for this kernel build?
To look in to another way I had heard of, "make deb" (which turned out to be "make deb-pkg"), I just tried this:
sudo apt-get install gcc-arm-linux-gnueabi git clone git://git.linaro.org/kernel/linux-linaro-2.6.38.git cd linux-linaro-2.6.38/ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap4_defconfig make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- deb-pkg
which then dies with
INSTALL include/asm (32 files) CHECK include/asm-generic (34 files) CHECK include/drm (14 files) /tmp/linux-linaro-2.6.38/usr/include/drm/drm_mode.h:85: found __[us]{8,16,32,64} type without #include <linux/types.h> /tmp/linux-linaro-2.6.38/usr/include/drm/i915_drm.h:120: found __[us]{8,16,32,64} type without #include <linux/types.h> /tmp/linux-linaro-2.6.38/usr/include/drm/mga_drm.h:260: found __[us]{8,16,32,64} type without #include <linux/types.h> /tmp/linux-linaro-2.6.38/usr/include/drm/radeon_drm.h:758: found __[us]{8,16,32,64} type without #include <linux/types.h> /tmp/linux-linaro-2.6.38/usr/include/drm/via_drm.h:117: found __[us]{8,16,32,64} type without #include <linux/types.h> CHECK include/linux/byteorder (2 files) CHECK include/linux/caif (2 files) CHECK include/linux/can (4 files) CHECK include/linux/dvb (8 files) CHECK include/linux/hdlc (1 files) CHECK include/linux/isdn (1 files) CHECK include/linux/netfilter (64 files) CHECK include/linux/netfilter_arp (2 files) CHECK include/linux/netfilter_bridge (18 files) CHECK include/linux/netfilter_ipv4 (14 files) CHECK include/linux/netfilter_ipv6 (11 files) CHECK include/linux/nfsd (6 files) CHECK include/linux/raid (2 files) CHECK include/linux/spi (1 files) CHECK include/linux/sunrpc (1 files) CHECK include/linux/tc_act (7 files) CHECK include/linux/tc_ematch (4 files) CHECK include/linux/usb (9 files) CHECK include/linux/wimax (1 files) CHECK include/linux (360 files) /tmp/linux-linaro-2.6.38/usr/include/linux/kernel.h:58: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:23: included file 'linux/module.h' is not exported /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:46: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:47: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:52: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:54: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:56: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:60: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:64: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/quota.h:175: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/sdla.h:116: userspace cannot reference function or variable defined in the kernel /tmp/linux-linaro-2.6.38/usr/include/linux/soundcard.h:1054: userspace cannot reference function or variable defined in the kernel make[4]: *** [/tmp/linux-linaro-2.6.38/usr/include/linux/.check] Error 123 make[3]: *** [linux] Error 2 make[2]: *** [headers_check] Error 2 make[1]: *** [deb-pkg] Error 2 make: *** [deb-pkg] Error 2
What's the fix for that?
Thanks,
James
Hello James,
I applied the patch you provided and tried the steps you mentioned. I am using omap2plus_defconfig, but the make deb-pkg fails with the following error:
dpkg-gencontrol: error: current host architecture 'armel' does not appear in package's architecture list () make[1]: *** [deb-pkg] Error 255 make: *** [deb-pkg] Error 2
Any idea of why this could be ?
Thanks and Regards, Deepti.
On Wed, Jun 15, 2011 at 1:44 AM, James Westby james.westby@linaro.orgwrote:
Hi,
I just tried .39 and there's no OMAP4, so the headers install if I use the omap2plus_defconfig.
I was then able to get deb-pkg to work after a fix to allow cross-building the package.
This seems to produce something reasonable for us to use, but it may be more robust to use the defconfigs with the PackageYourOwnKernel solution.
Thanks,
James
P.S. here's the hacky change to support cross build deb-pkg
diff --git a/scripts/package/builddeb b/scripts/package/builddeb index f6cbc3d..ea33db3 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -12,6 +12,43 @@
set -e
+# Attempt to find the correct Debian architecture +forcearch="" +debarch="" +case "$UTS_MACHINE" in +i386|ia64|alpha)
- debarch="$UTS_MACHINE" ;;
+x86_64)
- debarch=amd64 ;;
+sparc*)
- debarch=sparc ;;
+s390*)
- debarch=s390 ;;
+ppc*)
- debarch=powerpc ;;
+parisc*)
- debarch=hppa ;;
+mips*)
- debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y .config && echo el) ;;
+arm*)
- debarch=arm$(grep -q CONFIG_AEABI=y .config && echo el) ;;
+*)
- echo "" >&2
- echo "** ** ** WARNING ** ** **" >&2
- echo "" >&2
- echo "Your architecture doesn't have it's equivalent" >&2
- echo "Debian userspace architecture defined!" >&2
- echo "Falling back to using your current userspace instead!" >&2
- echo "Please add support for $UTS_MACHINE to ${0} ..." >&2
- echo "" >&2
+esac +if [ -z "$KBUILD_DEBARCH" ] ; then
- debarch="$KBUILD_DEBARCH"
+fi +if [ -n "$debarch" ] ; then
- forcearch="-DArchitecture=$debarch"
+fi
create_package() { local pname="$1" pdir="$2"
@@ -25,42 +62,6 @@ create_package() { chown -R root:root "$pdir" chmod -R go-w "$pdir"
# Attempt to find the correct Debian architecturelocal forcearch="" debarch=""case "$UTS_MACHINE" ini386|ia64|alpha)debarch="$UTS_MACHINE" ;;x86_64)debarch=amd64 ;;sparc*)debarch=sparc ;;s390*)debarch=s390 ;;ppc*)debarch=powerpc ;;parisc*)debarch=hppa ;;mips*)debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y .config && echoel) ;;
arm*)debarch=arm$(grep -q CONFIG_AEABI=y .config && echo el) ;;*)echo "" >&2echo "** ** ** WARNING ** ** **" >&2echo "" >&2echo "Your architecture doesn't have it's equivalent" >&2echo "Debian userspace architecture defined!" >&2echo "Falling back to using your current userspaceinstead!" >&2
echo "Please add support for $UTS_MACHINE to ${0} ..." >&2echo "" >&2esacif [ -n "$KBUILD_DEBARCH" ] ; thendebarch="$KBUILD_DEBARCH"fiif [ -n "$debarch" ] ; thenforcearch="-DArchitecture=$debarch"fi# Create the package dpkg-gencontrol -isp $forcearch -p$pname -P"$pdir" dpkg --build "$pdir" ..@@ -246,15 +247,14 @@ mkdir -p "$destdir" (cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -) (cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf -) rm -f /tmp/files$$ /tmp/objfiles$$ -arch=$(dpkg --print-architecture)
cat <<EOF >> debian/control
Package: $kernel_headers_packagename Provides: linux-headers, linux-headers-2.6 -Architecture: $arch -Description: Linux kernel headers for $KERNELRELEASE on $arch
- This package provides kernel header files for $KERNELRELEASE on $arch
+Architecture: $debarch +Description: Linux kernel headers for $KERNELRELEASE on $debarch
- This package provides kernel header files for $KERNELRELEASE on $debarch
. This is useful for people who need to build external modules EOF
On Mon, 13 Jun 2011 21:14:09 -0400, James Westby james.westby@linaro.org wrote:
On Mon, 13 Jun 2011 15:31:21 -0600, Matt Waddel <
matt.waddel@canonical.com> wrote:
AIUI, the config errors you listed need to be fixed by going through the kernel configuration and enabling or disabling these options as requested. So in the first example from the failure log you sent:
check-config: FAIL: value CONFIG_DEVKMEM n
means CONFIG_DEVKMEM is disabled when it should be enabled. So using "fdr editconfigs" you need to find and change that configuration
option.
When I tried this on Friday I had to run this step a few times because of kernel dependencies. The process is outlined in these sections:
Update Your Kernel Config Fix-up Your Kernel Config Bypass Remaining Config Errors
This doesn't really work for us as we need to do this daily in an automated fashion.
Is there a way to use the defconfigs for this kernel build?
To look in to another way I had heard of, "make deb" (which turned out to be "make deb-pkg"), I just tried this:
sudo apt-get install gcc-arm-linux-gnueabi git clone git://git.linaro.org/kernel/linux-linaro-2.6.38.git cd linux-linaro-2.6.38/ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap4_defconfig make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- deb-pkg
which then dies with
INSTALL include/asm (32 files) CHECK include/asm-generic (34 files) CHECK include/drm (14 files) /tmp/linux-linaro-2.6.38/usr/include/drm/drm_mode.h:85: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/i915_drm.h:120: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/mga_drm.h:260: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/radeon_drm.h:758: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/via_drm.h:117: found
__[us]{8,16,32,64} type without #include <linux/types.h>
CHECK include/linux/byteorder (2 files) CHECK include/linux/caif (2 files) CHECK include/linux/can (4 files) CHECK include/linux/dvb (8 files) CHECK include/linux/hdlc (1 files) CHECK include/linux/isdn (1 files) CHECK include/linux/netfilter (64 files) CHECK include/linux/netfilter_arp (2 files) CHECK include/linux/netfilter_bridge (18 files) CHECK include/linux/netfilter_ipv4 (14 files) CHECK include/linux/netfilter_ipv6 (11 files) CHECK include/linux/nfsd (6 files) CHECK include/linux/raid (2 files) CHECK include/linux/spi (1 files) CHECK include/linux/sunrpc (1 files) CHECK include/linux/tc_act (7 files) CHECK include/linux/tc_ematch (4 files) CHECK include/linux/usb (9 files) CHECK include/linux/wimax (1 files) CHECK include/linux (360 files) /tmp/linux-linaro-2.6.38/usr/include/linux/kernel.h:58: userspace cannot
reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:23: included file
'linux/module.h' is not exported
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:46: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:47: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:52: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:54: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:56: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:60: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:64: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/quota.h:175: userspace cannot
reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/sdla.h:116: userspace cannot
reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/soundcard.h:1054: userspace
cannot reference function or variable defined in the kernel
make[4]: *** [/tmp/linux-linaro-2.6.38/usr/include/linux/.check] Error
123
make[3]: *** [linux] Error 2 make[2]: *** [headers_check] Error 2 make[1]: *** [deb-pkg] Error 2 make: *** [deb-pkg] Error 2
What's the fix for that?
Thanks,
James
Hi,
My apologies, I forgot to say that I had to use
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- KBUILD_DEBARCH=armel \ deb-pkg
which tells it to build the package for armel.
Thanks,
James
On Wed, 15 Jun 2011 17:24:03 +0530, Deepti Kalakeri deepti.kalakeri@linaro.org wrote:
Hello James,
I applied the patch you provided and tried the steps you mentioned. I am using omap2plus_defconfig, but the make deb-pkg fails with the following error:
dpkg-gencontrol: error: current host architecture 'armel' does not appear in package's architecture list () make[1]: *** [deb-pkg] Error 255 make: *** [deb-pkg] Error 2
Any idea of why this could be ?
Thanks and Regards, Deepti.
On Wed, Jun 15, 2011 at 1:44 AM, James Westby james.westby@linaro.orgwrote:
Hi,
I just tried .39 and there's no OMAP4, so the headers install if I use the omap2plus_defconfig.
I was then able to get deb-pkg to work after a fix to allow cross-building the package.
This seems to produce something reasonable for us to use, but it may be more robust to use the defconfigs with the PackageYourOwnKernel solution.
Thanks,
James
P.S. here's the hacky change to support cross build deb-pkg
diff --git a/scripts/package/builddeb b/scripts/package/builddeb index f6cbc3d..ea33db3 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -12,6 +12,43 @@
set -e
+# Attempt to find the correct Debian architecture +forcearch="" +debarch="" +case "$UTS_MACHINE" in +i386|ia64|alpha)
- debarch="$UTS_MACHINE" ;;
+x86_64)
- debarch=amd64 ;;
+sparc*)
- debarch=sparc ;;
+s390*)
- debarch=s390 ;;
+ppc*)
- debarch=powerpc ;;
+parisc*)
- debarch=hppa ;;
+mips*)
- debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y .config && echo el) ;;
+arm*)
- debarch=arm$(grep -q CONFIG_AEABI=y .config && echo el) ;;
+*)
- echo "" >&2
- echo "** ** ** WARNING ** ** **" >&2
- echo "" >&2
- echo "Your architecture doesn't have it's equivalent" >&2
- echo "Debian userspace architecture defined!" >&2
- echo "Falling back to using your current userspace instead!" >&2
- echo "Please add support for $UTS_MACHINE to ${0} ..." >&2
- echo "" >&2
+esac +if [ -z "$KBUILD_DEBARCH" ] ; then
- debarch="$KBUILD_DEBARCH"
+fi +if [ -n "$debarch" ] ; then
- forcearch="-DArchitecture=$debarch"
+fi
create_package() { local pname="$1" pdir="$2"
@@ -25,42 +62,6 @@ create_package() { chown -R root:root "$pdir" chmod -R go-w "$pdir"
# Attempt to find the correct Debian architecturelocal forcearch="" debarch=""case "$UTS_MACHINE" ini386|ia64|alpha)debarch="$UTS_MACHINE" ;;x86_64)debarch=amd64 ;;sparc*)debarch=sparc ;;s390*)debarch=s390 ;;ppc*)debarch=powerpc ;;parisc*)debarch=hppa ;;mips*)debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y .config && echoel) ;;
arm*)debarch=arm$(grep -q CONFIG_AEABI=y .config && echo el) ;;*)echo "" >&2echo "** ** ** WARNING ** ** **" >&2echo "" >&2echo "Your architecture doesn't have it's equivalent" >&2echo "Debian userspace architecture defined!" >&2echo "Falling back to using your current userspaceinstead!" >&2
echo "Please add support for $UTS_MACHINE to ${0} ..." >&2echo "" >&2esacif [ -n "$KBUILD_DEBARCH" ] ; thendebarch="$KBUILD_DEBARCH"fiif [ -n "$debarch" ] ; thenforcearch="-DArchitecture=$debarch"fi# Create the package dpkg-gencontrol -isp $forcearch -p$pname -P"$pdir" dpkg --build "$pdir" ..@@ -246,15 +247,14 @@ mkdir -p "$destdir" (cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -) (cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf -) rm -f /tmp/files$$ /tmp/objfiles$$ -arch=$(dpkg --print-architecture)
cat <<EOF >> debian/control
Package: $kernel_headers_packagename Provides: linux-headers, linux-headers-2.6 -Architecture: $arch -Description: Linux kernel headers for $KERNELRELEASE on $arch
- This package provides kernel header files for $KERNELRELEASE on $arch
+Architecture: $debarch +Description: Linux kernel headers for $KERNELRELEASE on $debarch
- This package provides kernel header files for $KERNELRELEASE on $debarch
. This is useful for people who need to build external modules EOF
On Mon, 13 Jun 2011 21:14:09 -0400, James Westby james.westby@linaro.org wrote:
On Mon, 13 Jun 2011 15:31:21 -0600, Matt Waddel <
matt.waddel@canonical.com> wrote:
AIUI, the config errors you listed need to be fixed by going through the kernel configuration and enabling or disabling these options as requested. So in the first example from the failure log you sent:
check-config: FAIL: value CONFIG_DEVKMEM n
means CONFIG_DEVKMEM is disabled when it should be enabled. So using "fdr editconfigs" you need to find and change that configuration
option.
When I tried this on Friday I had to run this step a few times because of kernel dependencies. The process is outlined in these sections:
Update Your Kernel Config Fix-up Your Kernel Config Bypass Remaining Config Errors
This doesn't really work for us as we need to do this daily in an automated fashion.
Is there a way to use the defconfigs for this kernel build?
To look in to another way I had heard of, "make deb" (which turned out to be "make deb-pkg"), I just tried this:
sudo apt-get install gcc-arm-linux-gnueabi git clone git://git.linaro.org/kernel/linux-linaro-2.6.38.git cd linux-linaro-2.6.38/ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap4_defconfig make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- deb-pkg
which then dies with
INSTALL include/asm (32 files) CHECK include/asm-generic (34 files) CHECK include/drm (14 files) /tmp/linux-linaro-2.6.38/usr/include/drm/drm_mode.h:85: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/i915_drm.h:120: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/mga_drm.h:260: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/radeon_drm.h:758: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/via_drm.h:117: found
__[us]{8,16,32,64} type without #include <linux/types.h>
CHECK include/linux/byteorder (2 files) CHECK include/linux/caif (2 files) CHECK include/linux/can (4 files) CHECK include/linux/dvb (8 files) CHECK include/linux/hdlc (1 files) CHECK include/linux/isdn (1 files) CHECK include/linux/netfilter (64 files) CHECK include/linux/netfilter_arp (2 files) CHECK include/linux/netfilter_bridge (18 files) CHECK include/linux/netfilter_ipv4 (14 files) CHECK include/linux/netfilter_ipv6 (11 files) CHECK include/linux/nfsd (6 files) CHECK include/linux/raid (2 files) CHECK include/linux/spi (1 files) CHECK include/linux/sunrpc (1 files) CHECK include/linux/tc_act (7 files) CHECK include/linux/tc_ematch (4 files) CHECK include/linux/usb (9 files) CHECK include/linux/wimax (1 files) CHECK include/linux (360 files) /tmp/linux-linaro-2.6.38/usr/include/linux/kernel.h:58: userspace cannot
reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:23: included file
'linux/module.h' is not exported
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:46: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:47: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:52: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:54: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:56: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:60: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:64: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/quota.h:175: userspace cannot
reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/sdla.h:116: userspace cannot
reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/soundcard.h:1054: userspace
cannot reference function or variable defined in the kernel
make[4]: *** [/tmp/linux-linaro-2.6.38/usr/include/linux/.check] Error
123
make[3]: *** [linux] Error 2 make[2]: *** [headers_check] Error 2 make[1]: *** [deb-pkg] Error 2 make: *** [deb-pkg] Error 2
What's the fix for that?
Thanks,
James
Non-text part: text/html
On Wed, Jun 15, 2011 at 8:36 PM, James Westby james.westby@linaro.orgwrote:
Hi,
My apologies, I forgot to say that I had to use
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- KBUILD_DEBARCH=armel \ deb-pkg
ah! thanks James it helped.
which tells it to build the package for armel.
Thanks,
James
On Wed, 15 Jun 2011 17:24:03 +0530, Deepti Kalakeri < deepti.kalakeri@linaro.org> wrote:
Hello James,
I applied the patch you provided and tried the steps you mentioned. I am using omap2plus_defconfig, but the make deb-pkg fails with the following error:
dpkg-gencontrol: error: current host architecture 'armel' does not appear
in
package's architecture list () make[1]: *** [deb-pkg] Error 255 make: *** [deb-pkg] Error 2
Any idea of why this could be ?
Thanks and Regards, Deepti.
On Wed, Jun 15, 2011 at 1:44 AM, James Westby <james.westby@linaro.org wrote:
Hi,
I just tried .39 and there's no OMAP4, so the headers install if I use the omap2plus_defconfig.
I was then able to get deb-pkg to work after a fix to allow cross-building the package.
This seems to produce something reasonable for us to use, but it may be more robust to use the defconfigs with the PackageYourOwnKernel solution.
Thanks,
James
P.S. here's the hacky change to support cross build deb-pkg
diff --git a/scripts/package/builddeb b/scripts/package/builddeb index f6cbc3d..ea33db3 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -12,6 +12,43 @@
set -e
+# Attempt to find the correct Debian architecture +forcearch="" +debarch="" +case "$UTS_MACHINE" in +i386|ia64|alpha)
- debarch="$UTS_MACHINE" ;;
+x86_64)
- debarch=amd64 ;;
+sparc*)
- debarch=sparc ;;
+s390*)
- debarch=s390 ;;
+ppc*)
- debarch=powerpc ;;
+parisc*)
- debarch=hppa ;;
+mips*)
- debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y .config && echo el) ;;
+arm*)
- debarch=arm$(grep -q CONFIG_AEABI=y .config && echo el) ;;
+*)
- echo "" >&2
- echo "** ** ** WARNING ** ** **" >&2
- echo "" >&2
- echo "Your architecture doesn't have it's equivalent" >&2
- echo "Debian userspace architecture defined!" >&2
- echo "Falling back to using your current userspace instead!" >&2
- echo "Please add support for $UTS_MACHINE to ${0} ..." >&2
- echo "" >&2
+esac +if [ -z "$KBUILD_DEBARCH" ] ; then
- debarch="$KBUILD_DEBARCH"
+fi +if [ -n "$debarch" ] ; then
- forcearch="-DArchitecture=$debarch"
+fi
create_package() { local pname="$1" pdir="$2"
@@ -25,42 +62,6 @@ create_package() { chown -R root:root "$pdir" chmod -R go-w "$pdir"
# Attempt to find the correct Debian architecturelocal forcearch="" debarch=""case "$UTS_MACHINE" ini386|ia64|alpha)debarch="$UTS_MACHINE" ;;x86_64)debarch=amd64 ;;sparc*)debarch=sparc ;;s390*)debarch=s390 ;;ppc*)debarch=powerpc ;;parisc*)debarch=hppa ;;mips*)debarch=mips$(grep -q CPU_LITTLE_ENDIAN=y .config &&echo
el) ;;
arm*)debarch=arm$(grep -q CONFIG_AEABI=y .config && echo el);;
*)echo "" >&2echo "** ** ** WARNING ** ** **" >&2echo "" >&2echo "Your architecture doesn't have it's equivalent"&2
echo "Debian userspace architecture defined!" >&2echo "Falling back to using your current userspaceinstead!" >&2
echo "Please add support for $UTS_MACHINE to ${0} ..."&2
echo "" >&2esacif [ -n "$KBUILD_DEBARCH" ] ; thendebarch="$KBUILD_DEBARCH"fiif [ -n "$debarch" ] ; thenforcearch="-DArchitecture=$debarch"fi# Create the package dpkg-gencontrol -isp $forcearch -p$pname -P"$pdir" dpkg --build "$pdir" ..@@ -246,15 +247,14 @@ mkdir -p "$destdir" (cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -) (cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf
-)
rm -f /tmp/files$$ /tmp/objfiles$$ -arch=$(dpkg --print-architecture)
cat <<EOF >> debian/control
Package: $kernel_headers_packagename Provides: linux-headers, linux-headers-2.6 -Architecture: $arch -Description: Linux kernel headers for $KERNELRELEASE on $arch
- This package provides kernel header files for $KERNELRELEASE on $arch
+Architecture: $debarch +Description: Linux kernel headers for $KERNELRELEASE on $debarch
- This package provides kernel header files for $KERNELRELEASE on
$debarch
. This is useful for people who need to build external modules EOF
On Mon, 13 Jun 2011 21:14:09 -0400, James Westby <
james.westby@linaro.org>
wrote:
On Mon, 13 Jun 2011 15:31:21 -0600, Matt Waddel <
matt.waddel@canonical.com> wrote:
AIUI, the config errors you listed need to be fixed by going
through
the kernel configuration and enabling or disabling these options as requested. So in the first example from the failure log you sent:
check-config: FAIL: value CONFIG_DEVKMEM n
means CONFIG_DEVKMEM is disabled when it should be enabled. So
using
"fdr editconfigs" you need to find and change that configuration
option.
When I tried this on Friday I had to run this step a few times
because
of kernel dependencies. The process is outlined in these sections:
Update Your Kernel Config Fix-up Your Kernel Config Bypass Remaining Config Errors
This doesn't really work for us as we need to do this daily in an automated fashion.
Is there a way to use the defconfigs for this kernel build?
To look in to another way I had heard of, "make deb" (which turned
out
to be "make deb-pkg"), I just tried this:
sudo apt-get install gcc-arm-linux-gnueabi git clone git://git.linaro.org/kernel/linux-linaro-2.6.38.git cd linux-linaro-2.6.38/ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap4_defconfig make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- deb-pkg
which then dies with
INSTALL include/asm (32 files) CHECK include/asm-generic (34 files) CHECK include/drm (14 files) /tmp/linux-linaro-2.6.38/usr/include/drm/drm_mode.h:85: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/i915_drm.h:120: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/mga_drm.h:260: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/radeon_drm.h:758: found
__[us]{8,16,32,64} type without #include <linux/types.h>
/tmp/linux-linaro-2.6.38/usr/include/drm/via_drm.h:117: found
__[us]{8,16,32,64} type without #include <linux/types.h>
CHECK include/linux/byteorder (2 files) CHECK include/linux/caif (2 files) CHECK include/linux/can (4 files) CHECK include/linux/dvb (8 files) CHECK include/linux/hdlc (1 files) CHECK include/linux/isdn (1 files) CHECK include/linux/netfilter (64 files) CHECK include/linux/netfilter_arp (2 files) CHECK include/linux/netfilter_bridge (18 files) CHECK include/linux/netfilter_ipv4 (14 files) CHECK include/linux/netfilter_ipv6 (11 files) CHECK include/linux/nfsd (6 files) CHECK include/linux/raid (2 files) CHECK include/linux/spi (1 files) CHECK include/linux/sunrpc (1 files) CHECK include/linux/tc_act (7 files) CHECK include/linux/tc_ematch (4 files) CHECK include/linux/usb (9 files) CHECK include/linux/wimax (1 files) CHECK include/linux (360 files) /tmp/linux-linaro-2.6.38/usr/include/linux/kernel.h:58: userspace
cannot
reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:23: included
file
'linux/module.h' is not exported
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:46: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:47: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:52: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:54: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:56: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:60: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/omap_gpu.h:64: userspace
cannot reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/quota.h:175: userspace
cannot
reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/sdla.h:116: userspace
cannot
reference function or variable defined in the kernel
/tmp/linux-linaro-2.6.38/usr/include/linux/soundcard.h:1054:
userspace
cannot reference function or variable defined in the kernel
make[4]: *** [/tmp/linux-linaro-2.6.38/usr/include/linux/.check]
Error
123
make[3]: *** [linux] Error 2 make[2]: *** [headers_check] Error 2 make[1]: *** [deb-pkg] Error 2 make: *** [deb-pkg] Error 2
What's the fix for that?
Thanks,
James
Non-text part: text/html
Thanks and Regards, Deepti.
-
Deepti Kalakeri -
James Westby -
Matt Waddel