Hi, All

I want to use the panda-linaro build from here: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina...

but with the sdcard create by linaro-android-media-create, I can't boot the panda board. Anyone has met the same problem?

attached linaro-android-media-create.log is the output of the linaro-android-media-create

Following is the output of minicom:

Welcome to minicom 2.5

OPTIONS: I18n Compiled on May 2 2011, 10:05:24. Port /dev/ttyUSB0

Press CTRL-A Z for help on special keys

U-Boot SPL 2013.01.-rc1 (Mar 12 2013 - 01:42:53)

OMAP4460 ES1.1

OMAP SD/MMC: 0 ** Partition 1 not valid on device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###

U-Boot SPL 2013.01.-rc1 (Mar 12 2013 - 01:42:53) OMAP4460 ES1.1 OMAP SD/MMC: 0 ** Partition 1 not valid on device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###

U-Boot SPL 2013.01.-rc1 (Mar 12 2013 - 01:42:53) OMAP4460 ES1.1 OMAP SD/MMC: 0 ** Partition 1 not valid on device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###

U-Boot SPL 2013.01.-rc1 (Mar 12 2013 - 01:42:53) OMAP4460 ES1.1 OMAP SD/MMC: 0 ** Partition 1 not valid on device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###