Generalize CONFIG_IRQ_TIME_ACCOUNTING between X86 and ARM, move "noirqtime=" option to common debugging code. For a bit of backward compatibility, X86-specific option "tsc=noirqtime" is preserved, but issues a warning.
Suggested-by: Yong Zhang yong.zhang0@gmail.com Suggested-by: Russell King rmk+kernel@arm.linux.org.uk Suggested-by: Ingo Molnar mingo@elte.hu Suggested-by: Peter Zijlstra peterz@infradead.org Acked-by: Venkatesh Pallipadi venki@google.com Signed-off-by: Dmitry Antipov dmitry.antipov@linaro.org --- Documentation/kernel-parameters.txt | 9 +++++---- arch/arm/kernel/sched_clock.c | 2 ++ arch/x86/Kconfig | 11 ----------- arch/x86/kernel/tsc.c | 12 ++++++------ include/linux/sched.h | 6 +----- kernel/sched/core.c | 24 +++++++++++++++++++----- lib/Kconfig.debug | 12 ++++++++++++ 7 files changed, 45 insertions(+), 31 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 033d4e6..a5da255 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1790,6 +1790,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. noirqdebug [X86-32] Disables the code which attempts to detect and disable unhandled interrupt sources.
+ noirqtime [X86,ARM] Run time disables IRQ_TIME_ACCOUNTING and + eliminates the timestamping on irq/softirq entry/exit. + no_timer_check [X86,APIC] Disables the code which tests for broken timer IRQ sources.
@@ -2636,10 +2639,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. as the stability checks done at bootup. Used to enable high-resolution timer mode on older hardware, and in virtualized environment. - [x86] noirqtime: Do not use TSC to do irq accounting. - Used to run time disable IRQ_TIME_ACCOUNTING on any - platforms where RDTSC is slow and this accounting - can add overhead. + [x86] noirqtime: obsoleted by "noirqtime" generic option, + see it's documentation for details.
turbografx.map[2|3]= [HW,JOY] TurboGraFX parallel port interface diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 5416c7c..30b5f89 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -144,6 +144,8 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) */ cd.epoch_ns = 0;
+ enable_sched_clock_irqtime(); + pr_debug("Registered %pF as sched_clock source\n", read); }
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5bed94e..4759676 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -805,17 +805,6 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here.
-config IRQ_TIME_ACCOUNTING - bool "Fine granularity task level IRQ time accounting" - default n - ---help--- - Select this option to enable fine granularity task irq time - accounting. This is done by reading a timestamp on each - transitions between softirq and hardirq state, so there can be a - small performance impact. - - If in doubt, say N here. - source "kernel/Kconfig.preempt"
config X86_UP_APIC diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index a62c201..f1b2b63 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -103,14 +103,15 @@ int __init notsc_setup(char *str)
__setup("notsc", notsc_setup);
-static int no_sched_irq_time; - static int __init tsc_setup(char *str) { if (!strcmp(str, "reliable")) tsc_clocksource_reliable = 1; - if (!strncmp(str, "noirqtime", 9)) - no_sched_irq_time = 1; + if (!strncmp(str, "noirqtime", 9)) { + printk(KERN_WARNING "tsc: tsc=noirqtime is " + "obsolete, use noirqtime instead\n"); + disable_sched_clock_irqtime(); + } return 1; }
@@ -978,8 +979,7 @@ void __init tsc_init(void) /* now allow native_sched_clock() to use rdtsc */ tsc_disabled = 0;
- if (!no_sched_irq_time) - enable_sched_clock_irqtime(); + enable_sched_clock_irqtime();
lpj = ((u64)tsc_khz * 1000); do_div(lpj, HZ); diff --git a/include/linux/sched.h b/include/linux/sched.h index 7d379a6..ea4019c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1961,11 +1961,7 @@ extern void sched_clock_idle_wakeup_event(u64 delta_ns); #endif
#ifdef CONFIG_IRQ_TIME_ACCOUNTING -/* - * An i/f to runtime opt-in for irq time accounting based off of sched_clock. - * The reason for this explicit opt-in is not to have perf penalty with - * slow sched_clocks. - */ +extern int sched_clock_irqtime; extern void enable_sched_clock_irqtime(void); extern void disable_sched_clock_irqtime(void); #else diff --git a/kernel/sched/core.c b/kernel/sched/core.c index b342f57..4693509 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -757,11 +757,17 @@ static DEFINE_PER_CPU(u64, cpu_hardirq_time); static DEFINE_PER_CPU(u64, cpu_softirq_time);
static DEFINE_PER_CPU(u64, irq_start_time); -static int sched_clock_irqtime; + +/* + * -1 if not initialized, 0 if disabled with "noirqtime" kernel option + * or after unstable clock was detected, 1 if enabled and active. + */ +__read_mostly int sched_clock_irqtime = -1;
void enable_sched_clock_irqtime(void) { - sched_clock_irqtime = 1; + if (sched_clock_irqtime == -1) + sched_clock_irqtime = 1; }
void disable_sched_clock_irqtime(void) @@ -769,6 +775,14 @@ void disable_sched_clock_irqtime(void) sched_clock_irqtime = 0; }
+static int __init irqtime_setup(char *str) +{ + sched_clock_irqtime = 0; + return 1; +} + +__setup("noirqtime", irqtime_setup); + #ifndef CONFIG_64BIT static DEFINE_PER_CPU(seqcount_t, irq_time_seq);
@@ -822,7 +836,7 @@ void account_system_vtime(struct task_struct *curr) s64 delta; int cpu;
- if (!sched_clock_irqtime) + if (sched_clock_irqtime < 1) return;
local_irq_save(flags); @@ -2852,7 +2866,7 @@ void account_process_tick(struct task_struct *p, int user_tick) cputime_t one_jiffy_scaled = cputime_to_scaled(cputime_one_jiffy); struct rq *rq = this_rq();
- if (sched_clock_irqtime) { + if (sched_clock_irqtime > 0) { irqtime_account_process_tick(p, user_tick, rq); return; } @@ -2886,7 +2900,7 @@ void account_steal_ticks(unsigned long ticks) void account_idle_ticks(unsigned long ticks) {
- if (sched_clock_irqtime) { + if (sched_clock_irqtime > 0) { irqtime_account_idle_ticks(ticks); return; } diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 8745ac7..236e814 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -299,6 +299,18 @@ config SCHEDSTATS application, you can say N to avoid the very slight overhead this adds.
+config IRQ_TIME_ACCOUNTING + bool "Fine granularity task level IRQ time accounting" + depends on X86 || ARM + default n + ---help--- + Select this option to enable fine granularity task irq time + accounting. This is done by reading a timestamp on each + transitions between softirq and hardirq state, so there can be a + small performance impact. + + If in doubt, say N here. + config TIMER_STATS bool "Collect kernel timers statistics" depends on DEBUG_KERNEL && PROC_FS
-
Dmitry Antipov