boot-architecture April 2019

boot-architecture@lists.linaro.org

15 participants
15 discussions

by daniel.sangorrin＠toshiba.co.jp

Hello Francois, Jan, Christian, and all Sorry for the late reply, I was waiting for the administrator of the Boot Architecture mailing list to accept my subscription request, but it seems it will take a bit more time. I will send this reply and hope it will not be blocked. I have also added the u-boot mailing list to Cc, as Tom suggested (although I'm not a member), the CIP mailing list, Jan Kiszka (one of the main developers of Efibootguard) and Christian (an expert in software updates). Background: during the last Linaro connect in Bangkok I was told that Linaro Edge (LEDGE) were working on a secure software update mechanism based on UEFI capsules that would flash firmware updates from a UEFI application, instead of using a Linux agent such as SWUpdate. Then, I had an online meeting with Francois, director of LEDGE. I explained to Francois that in CIP we are using the Linux agent approach right now, and we are also considering the use of a UEFI application (Efibootguard) to arm a watchdog and deal with the state-machine variables (installed, testing, ok, failed..) needed for A/B software updates. Efibootguard sounds like an excellent place to collaborate with Linaro (particularly on the watchdog drivers front) because it does not strictly depend on where the firmware is flashed (UEFI capsule or Linux agent). > On Fri, Apr 19, 2019 at 12:48:51PM +0200, Francois Ozog wrote: > > Hi Daniel, > > > > We will be conducting a UEFI gap analysis to support EFIBootGuard in U-Boot. > > > > As we are working on UEFI SecureBoot implementation in U-Boot, how do > > you expect the boot process to be secured? Would U-Boot UEFI > > SecureBoot verify EFIBootGuard signature and in turn EFIBootGuard will > > check either grub or Linux signature? > > > > Please elaborate on your vision of a secured boot process. Efibootguard is composed of two parts. - A UEFI application that can arm a watchdog and decide what environment (kernel, boot args, etc.) to use next depending on a set of variables (update status, highest revision, etc.) stored in FAT16 partitions. - A Linux application that can read and set those variables from Linux (similar to u-boot's fw_setenv). This functionality is also available in the form of a library. As far as I know, there is no concept of "Secure Booting" in Efibootguard at the moment. Adding signature checks before booting into the selected kernel would be a possible solution. Thanks, Daniel

5 years

StandaloneMM discussion

by Ilias Apalodimas

Hi all, This started as an internal discussion for U-Booa and SSL which quickly span out of control, so the mailing list is a better suited place for this discussion. Akashi-san had an interesting idea. Since we will try to implement StandaloneMM as an OP-TEE TA, why not add payload authentication capabilities on it. Since it's already doing variable authentication on the secure side, the needed changes would be minimal (at least that's what i think, please correct me if i am wrong), since most of the code should already be there. This means that the payload authentication will be moved to the secure world. Although doing the authentication in secure world won't offer any security enhancements, the common code across firmware implementations is probably nice to have. The obvious drawback is that you limit the payload authentication capabilities, since running StMM will become obligatory for image that. Thanks /Ilias

5 years

EBBR Plugfest at ELC and/or ELC-E

by Grant Likely

Hi Bill and Peter, [cc'ing boot-architecture to trawl for additional volunteers] As discussed during EBBR monthly call today, we should have an EBBR plugfest at ELC and/or ELC-E this year with the goal of working out compatibility issues between platforms+firmware and OS images (distro images, OpenEmbedded, Buildroot, Yocto builds, etc). My initial thought is to run a full day event that is part hacking sprint and part plugfest. We could ask participants to either bring a platform (SBC with firmware installed) or an OS images and then set up a test matrix for each OS to test on each board. After an initial set of attempts the rest of the day could be a hacking sprint to solve problems and squash bugs. I'm only going to be at ELC this year (Aug 21-23rd in San Diego). I might be able to get the LF to provide a co-located room Tuesday the 20th. ELC-E will be in late October. If we do this at both events, then someone will need to take the lead on organizing the European version. Thoughts? g.

5 years

Shutting down arm.ebbr-discuss@arm.com mailing list

by Grant Likely

As discussed at Linaro Connect BKK19 in early April, the arm.ebbr-discuss mailing list isn't very functional because it doesn't have a public archive and non-Arm folks cannot subscribe themselves. I'm shutting down the arm.ebbr-discuss mailing list. From this date all EBBR discussion will be held on the boot-architecture(a)linaro.org mailing list. g.

5 years

EBBR Monthly Meeting - 23 April 2019

by Grant Likely

Hi all, The EBBR monthly meeting is later today. We're in the quiet period after releasing EBBR v1.0 and are unlikely to add new content immediately. Instead, we'll use the monthly meeting to track and discuss progress on Secure Boot with U-Boot, TF-A, and OP-TEE, as well as other desired EBBR features. As those features mature, we'll add language to EBBR to match. Dial in details below. g. --- There is a monthly conference call to discuss EBBR topics on the 4th Tuesday of the month at 15:00 UTC/BST, 7:00 PST/PDT, 23:00/22:00 CST (following UTC/BST daylight savings time shifts). Anyone is welcome to join. Online meeting: https://arm-onsite.webex.com/meet/gralik01 Phone 1-408-792-6300 Call-in toll number (US/Canada) 1-877-668-4490 Call-in toll-free number (US/Canada) 44-203-478-5285 Call-in toll number (UK) 08-002061177 Call-in toll-free (UK) More access numbers: webex-global-numbers Access code: 809 053 990

5 years

Re: EFIBootGuard for CIP and SecureBoot

by Heinrich Schuchardt

On Fri Apr 19 10:48:51 UTC 2019 François Ozog <francois.ozog(a)linaro.org> wrote > We will be conducting a UEFI gap analysis to support EFIBootGuard in > U-Boot. > > As we are working on UEFI SecureBoot implementation in U-Boot, how do > you expect the boot process to be secured? Would U-Boot UEFI > SecureBoot verify EFIBootGuard signature and in turn EFIBootGuard will > check either grub or Linux signature? > > Please elaborate on your vision of a secured boot process. The UEFI spec is quite clear about this: An implementation of SecureBoot will check the signature of any EFI binary before starting it. StartImage() will return EFI_SECURITY_VIOLATION when trying to start an image that is neither correctly signed nor whose hash is known. As we use StartImage() for starting any image the signature of EFIBootGuard would be checked first and then any of the child applications it starts. You will not be able to start GRUB or the Linux kernel if their signature are not added to U-Boot's key database. Of cause you could implement inside EFIBootGuard your own mechanism to start a loaded image without calling StartImage(). In this case U-Boot cannot protect you from invalid images. Best regards Heinrich

5 years

EFIBootGuard for CIP and SecureBoot

by Francois Ozog

Hi Daniel, We will be conducting a UEFI gap analysis to support EFIBootGuard in U-Boot. As we are working on UEFI SecureBoot implementation in U-Boot, how do you expect the boot process to be secured? Would U-Boot UEFI SecureBoot verify EFIBootGuard signature and in turn EFIBootGuard will check either grub or Linux signature? Please elaborate on your vision of a secured boot process. Cheers FF PS: you may want to subscribe to the boot-architecture mailing list in Linaro.

5 years, 1 month

Re: Standalone MM interface on U-Boot

by Francois Ozog

Hi, I suggest we move the discussion to https://lists.linaro.org/mailman/listinfo/boot-architecture I am sending the subscription link to BKK19 boot sprint attendees. Cheers FF On Thu, 11 Apr 2019 at 10:31, Francois Ozog <francois.ozog(a)linaro.org> wrote: > > > On Thu, 11 Apr 2019 at 10:23, AKASHI, Takahiro <takahiro.akashi(a)linaro.org> > wrote: > >> On Thu, 11 Apr 2019 at 16:49, Joakim Bech <joakim.bech(a)linaro.org> wrote: >> > >> > Hi, >> > >> > @Takahiro, thanks for teaching me what is right and wrong :) >> >> No, no. Everything is right, but some are only suitable for a specific >> relationship :) >> >> > @Ilias, @FF, replies inline below. >> > >> > On Thu, 11 Apr 2019 at 09:22, Francois Ozog <francois.ozog(a)linaro.org> >> wrote: >> >> >> >> >> >> >> >> On Thu, 11 Apr 2019 at 08:51, Ilias Apalodimas < >> ilias.apalodimas(a)linaro.org> wrote: >> >>> >> >>> Hi Akashi-san, >> >>> >> >>> > > I'm just drafting a new card for running the Standalone MM >> >>> > > as Trusted Application in OP-TEE. The use case as I understand >> >>> > > it is to call this TA from U-Boot environment (and when Linux is >> >>> > > up and running). >> >>> > >> >>> > I heard the almost same thing from Francois. >> >>> > I don't mind how the service will be implemented in secure world. >> What I'd >> >>> > like to do here is to add an interface for communicating with >> secure world >> >>> > on U-Boot side (normal world). >> >>> Can we try and avoid double and triple Jira epics, while still giving >> credit to >> >>> SIGs/Groups doing the work? >> >>> We already have an initiative up for u-boot relasted issues. >> >>> https://projects.linaro.org/browse/LEDGE-134 >> >>> >> >> >> >> My proposal is that EPICS related to OPTEE are owned by SWG, even if >> they are resourced by LEDGE. >> >> For instance, I can task a LEDGE assignee to do the OPTEE work under >> Joakim guidance and reporting on a SWG EPIC. >> > >> > This is inline with my thoughts. >> > >> >> >> >> LEDGE Initiative would include an EPIC link to the SWG EPIC: LEDGE can >> then track the many tasks done in KWG and SWG. >> >> Actually I proposed the creation of a lead project: dependable boot. >> >> >> >> For the time being, lets create all the Jira cards we think we need to >> address. Lets check each other iniatives to ensure we have identified all >> pieces of work. >> >> https://projects.linaro.org/browse/LEDGE-151 >> >> https://projects.linaro.org/browse/LEDGE-134 >> > >> > As we're speaking I'm drafting the work for a Standalone MM OP-TEE as >> well as the fTPM stuff: >> > https://projects.linaro.org/browse/SWG-372 (I'm going to add more >> details here after having a chat with Ard ... who is travelling to US for >> the moment). >> > https://projects.linaro.org/browse/SWG-373 >> > >> > Note that I'll more and more start creating Initiatives instead of >> Epics, since I believe the consensus after TSC voting is that our current >> Initiatives are too broad containing unrelated features. Having that said, >> beneath the Initiatives I'll split up sub-tasks as Epics. >> >> Let me make clear; I started my UEFI-related tasks almost >> independently from other groups' activities. In this sense, my >> 'initiative' is KWG-339 (I don't care much though). KWG-403 is >> a card where I want to keep my status updated. >> >> >> >> >> >> >>> >> >>> > >> >>> > Yes, I remember that we discussed lots about running Standalone MM >> as >> >>> > OP-TEE application, and what I'm asking is >> >>> > - do you have any chance to use Standalone MM service on SPM, or >> >>> > - do you want to use it solely as OP-TEE application. >> >>> For the moment all LEDGE platforms we know of are based on u-boot. >> >>> The only platform we have that not u-boot based is the SynQuacer box, >> but Ard >> >>> has already finished his StandaloneMM in SPM on that. >> >> >> >> >> >> SPM does not work with ST32MP1 which is a LEDGE 32 bit target platform >> and, AFAIK, will not work with virtualization in trustzone. >> >> So SPD is our way to go. >> > >> > Yes, and IIRC, this is why we need to make Ard's current Standalone MM >> implementation possible to run as an OP-TEE Trusted Application (basically >> SWG-372). It's even useful on Armv8 devices until we have support for >> running multiple SP's. >> >> So even for some sort of prototyping or POC, you won't use Standalone >> MM services >> in the current form and will be willing to wait for the completion of >> SWG-372? >> >> I think we can swap very easily the protocol used between u-boot and the > Standalone MM. You can surely do a first iteration with SPM version as it > exists today and you can just add the u-boot part. > This allows working in parrallel on different aspects of the > implementation. > We will focus on the SPD part. > > I heard from Ard that some assignee has finished porting Standalone MM >> services >> to qemu, and so I will be able to work on it integrating it into my >> current secure boot patch. >> >> > Sounds perfect! > > >> In addition, in my previous e-mail, I think that I raised some topic >> that we should >> discuss, image authentication as well as rolls of secure world and >> non-secure world. >> This will have impacts on my secure boot patch; in some scenario, my >> current work will >> make almost no sense. >> >> That needs proper discussion: > shall we use the boot-arch mail alias as the mailing list so that we reach > a broad community for comments? > shall we setup a weekly call ? (most attendees are europe to asia time > zones I believe) > > >> Thanks, >> -Takahiro Akashi >> >> >> >> >> >>> >> >>> Cheers >> >>> /Ilias >> > >> > >> > Regards, >> > Joakim >> > > > -- > [image: Linaro] > <https://www.linaro.org/assets/content/RGB-Linaro_Standard.png> > François-Frédéric Ozog | *Director Linaro Edge & Fog Computing Group* > T: +33.67221.6485 > francois.ozog(a)linaro.org | Skype: ffozog > > -- [image: Linaro] <https://www.linaro.org/assets/content/RGB-Linaro_Standard.png> François-Frédéric Ozog | *Director Linaro Edge & Fog Computing Group* T: +33.67221.6485 francois.ozog(a)linaro.org | Skype: ffozog

5 years, 1 month

Re: [Arm.ebbr-discuss] [EXT] Re: EBBR SC meeting on-site at Connect

by AKASHI Takahiro

# My apology if this kind of discussion is not appropriate in this ML. On Tue, Apr 09, 2019 at 04:20:48PM +0100, Yang Zhang wrote: > On Tue, 9 Apr 2019 at 16:18, Udit Kumar <udit.kumar(a)nxp.com> wrote: > > > Thanks for information AKASHI > > > > IMO for EBBR, we need to define subset of test-cases, which are required > > in EBBR specs. > > > > +1 Since I have been away from SCT long time, I almost forgot details of how SCT runs but at the first glance, it would be quite simple and straightforward as SCT already has a feature to run only a specific list of test cases (through TestCase.ini file). * create a list of test cases (TestCase.ini is automatically generated by SCT if we want to run all.) * check/mark only interested cases (There are always two types of tests: conformance and function.) * run SCT with this list The issue would be who maintain this list and where :) and I don't know that the 'granularity' of each test case would fit well for our subset. > > > I expect some fail in u-boot. > > Also need to find a better way to build uefi-sct > > > > +1 I used pre-built binary of SCT. -Takahiro Akashi > > > > Regards > > Udit > > > > > -----Original Message----- > > > From: AKASHI Takahiro <takahiro.akashi(a)linaro.org> > > > Sent: Tuesday, April 9, 2019 10:53 AM > > > To: Grant Likely <Grant.Likely(a)arm.com> > > > Cc: Udit Kumar <udit.kumar(a)nxp.com>; Dong Wei <Dong.Wei(a)arm.com>; Eric > > > FINCO <eric.finco(a)st.com>; Robert Oshana <robert.oshana(a)nxp.com>; Tony > > > Wu <tonywu(a)realtek.com>; boot-architecture(a)lists.linaro.org; arm.ebbr- > > > discuss <arm.ebbr-discuss(a)arm.com>; LEDGE SC <ledge-sc(a)linaro.org>; > > Varis, > > > Pekka <p-varis(a)ti.com>; nd <nd(a)arm.com> > > > Subject: [EXT] Re: EBBR SC meeting on-site at Connect > > > > > > WARNING: This email was created outside of NXP. DO NOT CLICK links or > > > attachments unless you recognize the sender and know the content is safe. > > > > > > > > > > > > On Sat, Apr 06, 2019 at 07:42:46PM +0000, Grant Likely wrote: > > > > Hi Udit, > > > > > > > > We talked about testing. We generally agreed that UEFI-SCT is > > > > important, even though it is limited. LuvOS (which includes UEFI-SCT) > > > > is a good candidate to do more complete testing, and we also talked > > > > about getting UEFI test cases into the U-Boot CI testing. > > > > > > Just FYI, it was last July that I ran UEFI SCT with U-Boot on qemu. > > > Here is a summary of the result: > > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs.goo > > > gle.com%2Fspreadsheets%2Fd%2F17e45yojM2nLdRovx0gcgHIAmvv9b_yc9iIUjZ > > > 2LY22c%2Fedit%3Fusp%3Dsharing&data=02%7C01%7Cudit.kumar%40nxp. > > > com%7Cc5b24ae4bd26466e1a7008d6bcab1c5c%7C686ea1d3bc2b4c6fa92cd99 > > > c5c301635%7C0%7C0%7C636903840436702643&sdata=00NOqcpsKPi8DkJ > > > u8y%2F7mLqSI8qQGFSGqzBhbpo3bbE%3D&reserved=0 > > > (Please note that this is not for public review, but just informative.) > > > > > > In my experience, I saw lots of failure cases (some or most of them are > > trivial > > > and can be duplicated ones though), and running through all the test > > cases took > > > a whole week. This is partly because SCT crashes occasionally and I > > needed to > > > restart it next morning :) > > > > > > So I'm not sure that U-Boot UEFI is ready for automated testing with SCT. > > > (We made lots of improvements recently, but I have had no time to re-run > > SCT > > > these days. Give me a fast machine :) > > > > > > -Takahiro Akashi > > > > > > > Linaro LEDGE is looking at adding U-Boot testing to their backlog, but > > > > they don't have any engineering resources who can be assigned to the > > > > work right now. I'm also going to try and resource this from Arm. > > > > > > > > g. > > > > > > > > On 04/04/2019 16:08, Udit Kumar wrote: > > > > > Hi Grant > > > > > > > > > >>>- other business > > > > > > > > > > See, if you can add compliance test suits for EBBR, or subset of > > > > > UEFI-SCT is enough ? > > > > > > > > > > Regards > > > > > > > > > > Udit > > > > > > > > > > *From:* arm.ebbr-discuss-bounces(a)arm.com > > > > > <arm.ebbr-discuss-bounces(a)arm.com> *On Behalf Of *Grant Likely > > > > > *Sent:* Wednesday, April 3, 2019 12:49 PM > > > > > *To:* Dong Wei <Dong.Wei(a)arm.com>; Eric FINCO <eric.finco(a)st.com>; > > > > > Robert Oshana <robert.oshana(a)nxp.com>; Tony Wu > > > <tonywu(a)realtek.com>; > > > > > boot-architecture(a)lists.linaro.org; arm.ebbr-discuss > > > > > <arm.ebbr-discuss(a)arm.com>; LEDGE SC <ledge-sc(a)linaro.org>; Varis, > > > > > Pekka <p-varis(a)ti.com> > > > > > *Subject:* Re: [Arm.ebbr-discuss] EBBR SC meeting on-site at Connect > > > > > > > > > > Agenda for today: > > > > > > > > > > - EBBR v1.0 released (yay!) > > > > > > > > > > - goals for v1.1 or v2.0 > > > > > > > > > > - other issues > > > > > > > > > > - secure world interfaces > > > > > > > > > > - non-block storage > > > > > > > > > > - identification of protected blocks > > > > > > > > > > - other business > > > > > > > > > > --- > > > > > > > > > > Grant Likely > > > > > > > > > > Sr. Technical Director SW Engineering > > > > > > > > > > -------------------------------------------------------------------- > > > > > ---- > > > > > > > > > > *From:*Grant Likely > > > > > *Sent:* Wednesday, April 3, 2019 1:49:23 PM > > > > > *To:* Dong Wei; Eric FINCO; robert.oshana(a)nxp.com; Tony Wu; > > > > > boot-architecture(a)lists.linaro.org; arm.ebbr-discuss; LEDGE SC; > > > > > Varis, Pekka > > > > > *Subject:* Re: EBBR SC meeting on-site at Connect > > > > > > > > > > details for those who had trouble with the calendar invite: > > > > > > > > > > Room: Lotus 5-6 > > > > > > > > > > Time: 5:00pm > > > > > > > > > > Sorry for those of you who aren’t here. I’m not going to have a dial > > > > > in, but I’ll take good notes. > > > > > > > > > > g. > > > > > > > > > > > > > _______________________________________________ > > > > boot-architecture mailing list > > > > boot-architecture(a)lists.linaro.org > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist > > > > s.linaro.org%2Fmailman%2Flistinfo%2Fboot- > > > architecture&data=02%7C01 > > > > > > > %7Cudit.kumar%40nxp.com%7Cc5b24ae4bd26466e1a7008d6bcab1c5c%7C686 > > > ea1d3b > > > > > > > c2b4c6fa92cd99c5c301635%7C0%7C0%7C636903840436702643&sdata=F > > > Rd8%2B > > > > nzRF827ZMG1fYeDwEr90V%2BZHvIHbFiIPAhBFiQ%3D&reserved=0 > > > > _______________________________________________ > > Arm.ebbr-discuss mailing list > > Arm.ebbr-discuss(a)arm.com

5 years, 1 month

Re: EBBR SC meeting on-site at Connect

by Grant Likely

details for those who had trouble with the calendar invite: Room: Lotus 5-6 Time: 5:00pm Sorry for those of you who aren’t here. I’m not going to have a dial in, but I’ll take good notes. g. IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years, 1 month

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

boot-architecture April 2019