boot-architecture

boot-architecture@lists.linaro.org

1 participants
684 discussions

Re: [Arm.ebbr-discuss] [EXT] Re: EBBR SC meeting on-site at Connect

by AKASHI Takahiro

# My apology if this kind of discussion is not appropriate in this ML. On Tue, Apr 09, 2019 at 04:20:48PM +0100, Yang Zhang wrote: > On Tue, 9 Apr 2019 at 16:18, Udit Kumar <udit.kumar(a)nxp.com> wrote: > > > Thanks for information AKASHI > > > > IMO for EBBR, we need to define subset of test-cases, which are required > > in EBBR specs. > > > > +1 Since I have been away from SCT long time, I almost forgot details of how SCT runs but at the first glance, it would be quite simple and straightforward as SCT already has a feature to run only a specific list of test cases (through TestCase.ini file). * create a list of test cases (TestCase.ini is automatically generated by SCT if we want to run all.) * check/mark only interested cases (There are always two types of tests: conformance and function.) * run SCT with this list The issue would be who maintain this list and where :) and I don't know that the 'granularity' of each test case would fit well for our subset. > > > I expect some fail in u-boot. > > Also need to find a better way to build uefi-sct > > > > +1 I used pre-built binary of SCT. -Takahiro Akashi > > > > Regards > > Udit > > > > > -----Original Message----- > > > From: AKASHI Takahiro <takahiro.akashi(a)linaro.org> > > > Sent: Tuesday, April 9, 2019 10:53 AM > > > To: Grant Likely <Grant.Likely(a)arm.com> > > > Cc: Udit Kumar <udit.kumar(a)nxp.com>; Dong Wei <Dong.Wei(a)arm.com>; Eric > > > FINCO <eric.finco(a)st.com>; Robert Oshana <robert.oshana(a)nxp.com>; Tony > > > Wu <tonywu(a)realtek.com>; boot-architecture(a)lists.linaro.org; arm.ebbr- > > > discuss <arm.ebbr-discuss(a)arm.com>; LEDGE SC <ledge-sc(a)linaro.org>; > > Varis, > > > Pekka <p-varis(a)ti.com>; nd <nd(a)arm.com> > > > Subject: [EXT] Re: EBBR SC meeting on-site at Connect > > > > > > WARNING: This email was created outside of NXP. DO NOT CLICK links or > > > attachments unless you recognize the sender and know the content is safe. > > > > > > > > > > > > On Sat, Apr 06, 2019 at 07:42:46PM +0000, Grant Likely wrote: > > > > Hi Udit, > > > > > > > > We talked about testing. We generally agreed that UEFI-SCT is > > > > important, even though it is limited. LuvOS (which includes UEFI-SCT) > > > > is a good candidate to do more complete testing, and we also talked > > > > about getting UEFI test cases into the U-Boot CI testing. > > > > > > Just FYI, it was last July that I ran UEFI SCT with U-Boot on qemu. > > > Here is a summary of the result: > > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs.goo > > > gle.com%2Fspreadsheets%2Fd%2F17e45yojM2nLdRovx0gcgHIAmvv9b_yc9iIUjZ > > > 2LY22c%2Fedit%3Fusp%3Dsharing&data=02%7C01%7Cudit.kumar%40nxp. > > > com%7Cc5b24ae4bd26466e1a7008d6bcab1c5c%7C686ea1d3bc2b4c6fa92cd99 > > > c5c301635%7C0%7C0%7C636903840436702643&sdata=00NOqcpsKPi8DkJ > > > u8y%2F7mLqSI8qQGFSGqzBhbpo3bbE%3D&reserved=0 > > > (Please note that this is not for public review, but just informative.) > > > > > > In my experience, I saw lots of failure cases (some or most of them are > > trivial > > > and can be duplicated ones though), and running through all the test > > cases took > > > a whole week. This is partly because SCT crashes occasionally and I > > needed to > > > restart it next morning :) > > > > > > So I'm not sure that U-Boot UEFI is ready for automated testing with SCT. > > > (We made lots of improvements recently, but I have had no time to re-run > > SCT > > > these days. Give me a fast machine :) > > > > > > -Takahiro Akashi > > > > > > > Linaro LEDGE is looking at adding U-Boot testing to their backlog, but > > > > they don't have any engineering resources who can be assigned to the > > > > work right now. I'm also going to try and resource this from Arm. > > > > > > > > g. > > > > > > > > On 04/04/2019 16:08, Udit Kumar wrote: > > > > > Hi Grant > > > > > > > > > >>>- other business > > > > > > > > > > See, if you can add compliance test suits for EBBR, or subset of > > > > > UEFI-SCT is enough ? > > > > > > > > > > Regards > > > > > > > > > > Udit > > > > > > > > > > *From:* arm.ebbr-discuss-bounces(a)arm.com > > > > > <arm.ebbr-discuss-bounces(a)arm.com> *On Behalf Of *Grant Likely > > > > > *Sent:* Wednesday, April 3, 2019 12:49 PM > > > > > *To:* Dong Wei <Dong.Wei(a)arm.com>; Eric FINCO <eric.finco(a)st.com>; > > > > > Robert Oshana <robert.oshana(a)nxp.com>; Tony Wu > > > <tonywu(a)realtek.com>; > > > > > boot-architecture(a)lists.linaro.org; arm.ebbr-discuss > > > > > <arm.ebbr-discuss(a)arm.com>; LEDGE SC <ledge-sc(a)linaro.org>; Varis, > > > > > Pekka <p-varis(a)ti.com> > > > > > *Subject:* Re: [Arm.ebbr-discuss] EBBR SC meeting on-site at Connect > > > > > > > > > > Agenda for today: > > > > > > > > > > - EBBR v1.0 released (yay!) > > > > > > > > > > - goals for v1.1 or v2.0 > > > > > > > > > > - other issues > > > > > > > > > > - secure world interfaces > > > > > > > > > > - non-block storage > > > > > > > > > > - identification of protected blocks > > > > > > > > > > - other business > > > > > > > > > > --- > > > > > > > > > > Grant Likely > > > > > > > > > > Sr. Technical Director SW Engineering > > > > > > > > > > -------------------------------------------------------------------- > > > > > ---- > > > > > > > > > > *From:*Grant Likely > > > > > *Sent:* Wednesday, April 3, 2019 1:49:23 PM > > > > > *To:* Dong Wei; Eric FINCO; robert.oshana(a)nxp.com; Tony Wu; > > > > > boot-architecture(a)lists.linaro.org; arm.ebbr-discuss; LEDGE SC; > > > > > Varis, Pekka > > > > > *Subject:* Re: EBBR SC meeting on-site at Connect > > > > > > > > > > details for those who had trouble with the calendar invite: > > > > > > > > > > Room: Lotus 5-6 > > > > > > > > > > Time: 5:00pm > > > > > > > > > > Sorry for those of you who aren’t here. I’m not going to have a dial > > > > > in, but I’ll take good notes. > > > > > > > > > > g. > > > > > > > > > > > > > _______________________________________________ > > > > boot-architecture mailing list > > > > boot-architecture(a)lists.linaro.org > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist > > > > s.linaro.org%2Fmailman%2Flistinfo%2Fboot- > > > architecture&data=02%7C01 > > > > > > > %7Cudit.kumar%40nxp.com%7Cc5b24ae4bd26466e1a7008d6bcab1c5c%7C686 > > > ea1d3b > > > > > > > c2b4c6fa92cd99c5c301635%7C0%7C0%7C636903840436702643&sdata=F > > > Rd8%2B > > > > nzRF827ZMG1fYeDwEr90V%2BZHvIHbFiIPAhBFiQ%3D&reserved=0 > > > > _______________________________________________ > > Arm.ebbr-discuss mailing list > > Arm.ebbr-discuss(a)arm.com

7 years, 1 month

Re: EBBR SC meeting on-site at Connect

by Grant Likely

details for those who had trouble with the calendar invite: Room: Lotus 5-6 Time: 5:00pm Sorry for those of you who aren’t here. I’m not going to have a dial in, but I’ll take good notes. g. IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

7 years, 1 month

Re: [edk2] [edk2-announce] ATTN: List Transition Begins Today

by Leif Lindholm

FYI: EDK2 development mailing list changing to devel(a)edk2.groups.io This will give us some better flexibility with regards to whitelisting non-subscribers and suchlike currently not possible through 01.org. On Wed, Apr 03, 2019 at 10:59:31AM -0500, stephano wrote: > tl;dr > If you're sending emails to this list, now would be a good time to switch > over to the new list: https://edk2.groups.io/g/devel > > > We will be transitioning to Groups.io today for our devel mailing list. At > some point today, this email will begin to bounce any incoming messages. > I'll be working on getting the archive of old emails uploaded to Groups.io. > When I have a timetable for the archives I'll update the new list. > > Cheers, > Stephano > _______________________________________________ > edk2-devel mailing list > edk2-devel(a)lists.01.org > https://lists.01.org/mailman/listinfo/edk2-devel

7 years, 1 month

EBBR SC meeting on-site at Connect

by Grant Likely

[Updated with new room] Hi all, For those of you at Linaro Connect, I’ve scheduled an EBBR Face to Face on Wednesday. I’ll email around an agenda tomorrow. Email me if you’ve got anything specific you’d like to discuss. For those of you who aren’t here, I’ll try to provide a remote dial-in but I’m not hopeful that it will work. I will make sure good notes are taken, and we’ll do a summary on the next regular conference call. Cheers, g. IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

7 years, 1 month

EBBR SC meeting on-site at Connect

by Grant Likely

Hi all, For those of you at Linaro Connect, I’ve scheduled an EBBR Face to Face on Wednesday. I’ll email around an agenda tomorrow. Email me if you’ve got anything specific you’d like to discuss. For those of you who aren’t here, I’ll try to provide a remote dial-in but I’m not hopeful that it will work. I will make sure good notes are taken, and we’ll do a summary on the next regular conference call. Cheers, g. IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

7 years, 1 month

EBBR SC meeting on-site at Connect

by Grant Likely

7 years, 1 month

EBBR v1.0-rc1

by Grant Likely

Hi all, Last week I tagged v1.0-rc1 of EBBR. The release .pdf can be found here: https://github.com/ARM-software/ebbr/releases It should represent the content we've discussed in the regular meetings for a baseline v1.0 EBBR. Please review and comment. If there are no major objections I intend to release v1.0 final on Friday this week ahead of Linaro Connect. g.

7 years, 1 month

EBBR v0.8 released

by Grant Likely

Hi all, Yesterday I tagged EBBR v0.8 in the git repo and published a new pdf. Please go review and comment. https://github.com/ARM-software/ebbr/releases/tag/v0.8 We're nearing the end of the v1.0 process. I would like to tag a v1.0 release before the end of March. Feedback comments from v0.6 and v0.7 have been incorporated. Presuming no major objections, I will tag a v1.0-rc1 on Monday 18 March 2019, to be followed by a final v1.0 on Friday 29 March, There is one more outstanding change that didn't make it into v0.8, but will be in the next release. The UEFI requirements appendix has been removed as it merely duplicates requirements already listed in the UEFI specification. Thanks, g.

7 years, 2 months

[PATCH] Remove unnecessary UEFI requirement tables

by Grant Likely

Nothing in the UEFI Requirements appendix is valuable. The table of required boot services is unnecessary because it is an exact duplicate of the UEFI boot services list in the UEFI spec (and it also happens to be slightly incorrect) (UEFI 2.6.1). It is providing no value to include in EBBR as all UEFI implementations are required to implement the full set. The tables of required core protocols are already specified in the UEFI spec (UEFI 2.6.1) The table of required media i/o protocols are already required if the device supports booting from a disk device (UEFI 2.6.2). The table of console protocols is similarly already required if a console device is present. It isn't clear that HII protocols need to be required. U-Boot does implement them, but it doesn't appear to be a critical requirement on whether or not an OSV can support the platform. The tables of optional UEFI protocols isn't adding any value because it doesn't require anything of implementers, and it doesn't provide any commentary on when the protocols should be included. This is just additional text. Remove the lot to simplify the spec. Signed-off-by: Grant Likely <grant.likely(a)arm.com> --- source/appendix-a-uefi-features.rst | 203 ------------------------------------ source/chapter2-uefi.rst | 4 - source/index.rst | 1 - 3 files changed, 208 deletions(-) delete mode 100644 source/appendix-a-uefi-features.rst diff --git a/source/appendix-a-uefi-features.rst b/source/appendix-a-uefi-features.rst deleted file mode 100644 index bb74ca5..0000000 --- a/source/appendix-a-uefi-features.rst +++ /dev/null @@ -1,203 +0,0 @@ -.. SPDX-License-Identifier: CC-BY-SA-4.0 -.. _appendix-uefi-requirements: - -############################################# -APPENDIX A - UEFI Implementation Requirements -############################################# - -Required Boot Services -********************** - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_RAISE_TPL 7.1 -EFI_RESTORE_TPL 7.1 -EFI_ALLOCATE_PAGES 7.2 -EFI_FREE_PAGES 7.2 -EFI_GET_MEMORY_MAP 7.2 -EFI_ALLOCATE_POOL 7.2 -EFI_FREE_POOL 7.2 -EFI_CREATE_EVENT 7.1 -EFI_SET_TIMER 7.1 -EFI_WAIT_FOR_EVENT 7.1 -EFI_SIGNAL_EVENT 7.1 -EFI_CLOSE_EVENT 7.1 -EFI_INSTALL_PROTOCOL_INTERFACE 7.3 -EFI_REINSTALL_PROTOCOL_INTERFACE 7.3 -EFI_UNINSTALL_PROTOCOL_INTERFACE 7.3 -EFI_HANDLE_PROTOCOL 7.3 -EFI_REGISTER_PROTOCOL_NOTIFY 7.3 -EFI_LOCATE_HANDLE 7.3 -EFI_LOCATE_PROTOCOL 7.3 -EFI_LOCATE_DEVICE_PATH 7.3 -EFI_INSTALL_CONFIGURATION_TABLE 7.3 -EFI_IMAGE_LOAD 7.4 -EFI_IMAGE_START 7.4 -EFI_EXIT 7.4 -EFI_IMAGE_UNLOAD 7.4 -EFI_EXIT_BOOT_SERVICES 7.4 -EFI_GET_NEXT_MONOTONIC_COUNT 7.5 -EFI_STALL 7.5 -EFI_SET_WATCHDOG_TIMER 7.5 -EFI_CONNECT_CONTROLLER 7.3 -EFI_DISCONNECT_CONTROLLER 7.3 -EFI_OPEN_PROTOCOL 7.3 -EFI_CLOSE_PROTOCOL 7.3 -EFI_OPEN_PROTOCOL_INFORMATION 7.3 -EFI_PROTOCOLS_PER_HANDLE 7.3 -EFI_LOCATE_HANDLE_BUFFER 7.3 -EFI_LOCATE_PROTOCOL 7.3 -EFI_INSTALL_MULTIPLE_PROTOCOL_INTERFACES 7.3 -EFI_UNINSTALL_MULTIPLE_PROTOCOL_INTERFACES 7.3 -EFI_CALCULATE_CRC32 7.5 -EFI_COPY_MEM 7.5 -EFI_SET_MEM 7.5 -EFI_CREATE_EVENT_EX 7.5 -========================================== ====== - -Required UEFI Protocols -*********************** - -Core UEFI Protocols -=================== - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_LOADED_IMAGE_PROTOCOL 9.1 -EFI_LOADED_IMAGE_DEVICE_PATH_PROTOCOL 9.2 -EFI_DECOMPRESS_PROTOCOL 19.5 -EFI_DEVICE_PATH_PROTOCOL 10.2 -EFI_DEVICE_PATH_UTILITIES_PROTOCOL 10.3 -========================================== ====== - -Media I/O Protocols -=================== - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_LOAD_FILE2_PROTOCOL 13.2 -EFI_SIMPLE_FILE_SYSTEM_PROTOCOL 13.4 -EFI_FILE_PROTOCOL 13.5 -========================================== ====== - -Console Protocols -================= - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_SIMPLE_TEXT_INPUT_PROTOCOL 12.2 -EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL 12.3 -EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL 12.4 -========================================== ====== - -Driver Configuration Protocols -============================== - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_HII_DATABASE_PROTOCOL 33.4 -EFI_HII_STRING_PROTOCOL 33.4 -EFI_HII_CONFIG_ROUTING_PROTOCOL 33.4 -EFI_HII_CONFIG_ACCESS_PROTOCOL 33.4 -========================================== ====== - -Optional UEFI Protocols -*********************** - -Basic Networking Support -======================== - -============================================ ====== -Service UEFI § -============================================ ====== -EFI_SIMPLE_NETWORK_PROTOCOL 24.1 -EFI_MANAGED_NETWORK_PROTOCOL 25.1 -EFI_MANAGED_NETWORK_SERVICE_BINDING_PROTOCOL 25.1 -============================================ ====== - -.. note:: Networking services are optional on platforms that do not support - networking. - -Network Boot Protocols -====================== - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_PXE_BASE_CODE_PROTOCOL 24.3 -EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL 24.4 -EFI_BIS_PROTOCOL 24.5 -EFI_MTFTP4_PROTOCOL 30.3 -EFI_MTFTP6_PROTOCOL 30.4 -========================================== ====== - -.. note:: EFI_BIS_PROTOCOL is optional on machines that do not support Secure - Boot. - -IPV4 Network Support -==================== - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_ARP_PROTOCOL 29.1 -EFI_ARP_SERVICE_BINDING_PROTOCOL 29.1 -EFI_DHCP4_SERVICE_BINDING_PROTOCOL 29.2 -EFI_DHCP4_PROTOCOL 29.2 -EFI_TCP4_PROTOCOL 28.1.2 -EFI_TCP4_SERVICE_BINDING_PROTOCOL 28.1.1 -EFI_IP4_SERVICE_BINDING_PROTOCOL 28.3.1 -EFI_IP4_CONFIG2_PROTOCOL 28.5 -EFI_UDP4_PROTOCOL 30.1.2 -EFI_UDP4_SERVICE_BINDING_PROTOCOL 30.1.1 -========================================== ====== - -.. note:: Networking services are optional on platforms that do not support - networking. - -IPV6 Network Support -==================== - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_DHCP6_PROTOCOL 29.3.2 -EFI_DHCP6_SERVICE_BINDING_PROTOCOL 29.3.1 -EFI_TCP6_PROTOCOL 28.2.2 -EFI_TCP6_SERVICE_BINDING_PROTOCOL 28.2.1 -EFI_IP6_SERVICE_BINDING_PROTOCOL 28.6.1 -EFI_IP6_CONFIG_PROTOCOL 28.7 -EFI_UDP6_PROTOCOL 30.2.2 -EFI_UDP6_SERVICE_BINDING_PROTOCOL 30.2.1 -========================================== ====== - -.. note:: Networking services are optional on platforms that do not support - networking. - -VLAN Protocols -============== - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_VLAN_CONFIG_PROTOCOL 27.1 -========================================== ====== - -iSCSI Protocols -=============== - -========================================== ====== -Service UEFI § -========================================== ====== -EFI_ISCSI_INITIATOR_NAME_PROTOCOL 16.2 -========================================== ====== - -.. note:: Support for iSCSI is only required on machines that lack persistent - storage, such as a, HDD. This configuration is intended for thin clients and - compute-only nodes - diff --git a/source/chapter2-uefi.rst b/source/chapter2-uefi.rst index a8fe3a3..f6a5802 100644 --- a/source/chapter2-uefi.rst +++ b/source/chapter2-uefi.rst @@ -17,10 +17,6 @@ UEFI Compliance EBBR compliant platforms shall conform to the requirements in [UEFI]_ § 2.6, except where explicit exemptions are provided by this document. -EBBR compliant platforms shall also implement the UEFI services and -protocols that are listed in :ref:`appendix-uefi-requirements` of this -document. - Block device partitioning ------------------------- diff --git a/source/index.rst b/source/index.rst index 8722694..186498f 100644 --- a/source/index.rst +++ b/source/index.rst @@ -51,5 +51,4 @@ Creative Commons, PO Box 1866, Mountain View, CA 94042, USA. chapter2-uefi chapter3-secureworld chapter4-firmware-media - appendix-a-uefi-features references -- 2.13.0

7 years, 2 months

New series of EBBR meetings

by Grant Likely

Hi all, I've created a new series of EBBR meetings; this time biweekly on the 2nd and 4th Tuesday of each month based on the feedback I received on the Doodle poll. First meeting today and the one topic on the agenda is pickup up from where things were left off in December. Here are the dial-in details: - Online meeting: https://arm-onsite.webex.com/meet/gralik01 - Phone - Access code: 809 053 990 - 1-408-792-6300 Call-in toll number (US/Canada) - 1-877-668-4490 Call-in toll-free number (US/Canada) - 44-203-478-5285 Call-in toll number (UK) - 08-002061177 Call-in toll-free (UK) More access numbers: https://arm-onsite.webex.com/cmp3300/webcomponents/widget/globalcallin/glob… IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

7 years, 2 months

← Newer
1
...
36
37
38
39
40
41
42
...
69
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

boot-architecture