On 21 June 2013 09:05, Ryan Harkin ryan.harkin@linaro.org wrote:
Linaro have been carrying a few small patches in our tree for some months now; they have proven valuable and stable, so we'd like to push them upstream.
The first few patches configure the platforms with some simple default values and some extra build options.
[PATCH 1/9] ArmPlatformPkg/ArmVExpressPkg: Add support for EDK2_OUT_DIR build parameter [PATCH 2/9] ArmPlatformPkg/ArmVExpressPkg: CTA15-A7: Allow EDK2_SKIP_PEICORE to be specified at build time [PATCH 3/9] ArmPlatformPkg/ArmVExpressPkg: CTA9x4: default to EDK2_ARMVE_STANDALONE=1
There is a patch to fix shutdown on Versatile Express platforms:
[PATCH 4/9] ArmPlatformPkg/ArmVExpressPkg: add Shutdown support
There is a small fix for a case sensitivity problem in the ARM BDS:
[PATCH 5/9] ArmPlatformPkg/Bds: Make ".EFI" files recognizable as
Then there are some small improvements to the menu options in ARM BDS:
[PATCH 6/9] ArmPlatformPkg/Bds: use letters for hard coded boot menu [PATCH 7/9] ArmPlatformPkg/Bds: Add Reboot and Shutdown options to main menu [PATCH 8/9] ArmPlatformPkg/Bds: show global FDT config in main menu
Finally, there is a larger patch to allow each boot configuration to specify it's own Flattened Device Tree binary. This is important in our automated build systems, because as the DTB evolves, our "master" image may end up with a different DTB than the image under test.
[PATCH 9/9] ArmPlatformPkg/Bds: add local FDT config
I forgot to add that I've pushed all of these changes to a branch that can be pulled for further investigate/merging/etc...
https://git.linaro.org/gitweb?p=arm/uefi/uefi-next.git%3Ba=shortlog%3Bh=refs...
This is based off quite recent Tianocore upstream code only:
edk2@14395 BaseTools@2582 edk2-fatdriver2/trunk@73
Regards, Ryan.