linaro-dev June 2011

linaro-dev@lists.linaro.org

149 participants
196 discussions

[PATCH android/toolchain/build] Fix host-libbfd installation problem caused by undefined $(INSTALL)

by Jim Huang

While executing target install-host-libbfd, the build system complains: make -C libbfd-binutils-2.20.1/bfd install \ bfdlibdir=/tmp/android-toolchain-eabi/lib bfdincludedir=/tmp/android-toolchain-eabi/include && \ -m 644 libbfd-binutils-2.20.1/intl/libintl.a \ /tmp/android-toolchain-eabi/lib && \ -m 644 libbfd-binutils-2.20.1/libiberty/libiberty.a \ /tmp/android-toolchain-eabi/lib /bin/sh: line 2: -m: command not found The problem was caused by undefined $(INSTALL). The patch attempts to configure `install' program by autotool in order to set $(INSTALL) properly and replace $(INSTALL) -m 644 with multi-platform friendly $(INSTALL_DATA). Code Review: https://review.source.android.com/#change,23179

12 years, 11 months

Re: [PATCH] regulator: MAX8997: Fix for divide by zero error

by 함명주

Sender : Tushar Behera<tushar.behera(a)linaro.org> Date : 2011-06-21 12:38 (GMT+09:00) > Currently, ramp_delay variable is used uninitialzed in > max8997_set_voltage_ldobuck which gets called through > regulator_register calls. > > To fix the problem, in max8997_pmic_probe, ramp_delay initialization > code is moved before calls to regulator_register. > > Cc: Liam Girdwood > Cc: Mark Brown > Cc: MyungJoo Ham > Cc: Kyungmin Park > Cc: Samuel Ortiz > Signed-off-by: Tushar Behera Although I've never been reported such an issue, but I'm sure this will cause one any time. Thanks! Acked-by: MyungJoo Ham <myungjoo.ham(a)samsung.com> > --- > drivers/regulator/max8997.c | 8 ++++---- > 1 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c > index 10d5a1d..0fc7b8c 100644 > --- a/drivers/regulator/max8997.c > +++ b/drivers/regulator/max8997.c > @@ -1124,6 +1124,10 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) > 0x3f); > } > > + /* Misc Settings */ > + max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ > + max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); > + > for (i = 0; i < pdata->num_regulators; i++) { > const struct voltage_map_desc *desc; > int id = pdata->regulators[i].id; > @@ -1148,10 +1152,6 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) > } > } > > - /* Misc Settings */ > - max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ > - max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); > - > return 0; > err: > for (i = 0; i < max8997->num_regulators; i++) > -- > 1.7.4.1 > > MyungJoo Ham (함명주) Mobile Software Platform Lab, Digital Media and Communications (DMC) Business Samsung Electronics cell: +82-10-6714-2858 / office: +82-31-279-8033

12 years, 11 months

Compiling kernel for panda linaro natty 11.05

by Amit Mahajan

Hi, I have booted panda board using 11.05 natty release of ubuntu. It worked great. Now, I am trying to compile the kernel myself. I am using the sources from tarball provided on 11.05 release page as well as from linaro git 2.6.38 tree. I have extracted the .config from running ubuntu(of 11.05 LEB) and using it to compile my own kernels. Then I am just replacing the uImage on sdcard(generated using 11.05 LEB) by my compiled kernel. Boot process goes fine till the init process but then it fails to bring on the graphics and goes to console mode. Any help on this? Below are the boot logs I see with kernel from tarball provided on 11.05 release page: Begin: Running /scripts/init-bottom ... done. init: ureadahead main process (195) terminated with status 5 fsck from util-linux-ng 2.17.2 rootfs: clean, 135614/239040 files, 433096/954752 blocks * Starting mDNS/DNS-SD daemon[ OK ] * Stopping cold plug devices[ OK ] * Stopping log initial device creation[ OK ] * Starting save udev log and update rules[ OK ] * Stopping save udev log and update rules[ OK ] fsck from util-linux-ng 2.17.2 rootfs: clean, 135614/239040 files, 433096/954752 blocks * Starting mDNS/DNS-SD daemon[ OK ] * Stopping cold plug devices[ OK ] * Stopping log initial device creation[ OK ] * Starting save udev log and update rules[ OK ] * Stopping save udev log and update rules[ OK ] * Starting AppArmor profiles Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 comp atibility patch.) Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/gdm-guest-session (/etc/apparmor.d/gdm-guest-session line 49): profile /usr/share/gdm/guest-session/Xsession network rules not en forced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.dhclient (/etc/apparmor.d/sbin.dhclient line 73): profile /sbin/dhclient network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 169): profile /usr/lib/cups/backend/cups-pdf network rules not enforced Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 169): profile /usr/sbin/cupsd network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 134): profile /usr/bin/evince network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 134): profile /usr/bin/evince-previewer network rules not enforced [ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher [ OK ]rting bluetooth Last login: Tue Jun 21 06:21:37 UTC 2011 on tty1 * PulseAudio configured for per-user sessions Welcome to Linaro 11.05 (GNU/Linux 2.6.38.7 armv7l) * Documentation: https://wiki.linaro.org/ * Enabling additional executable binary formats binfmt-support FATAL: Could not load /lib/modules/2.6.38.7/modules.dep: No such file or directory update-binfmts: warning: Couldn't load the binfmt_misc module. [ OK ] root@linaro:~# -- Thanks Amit Mahajan

12 years, 11 months

Re: LAVA Dashboard user forum

by Zygmunt Krynicki

W dniu 17.06.2011 18:24, Zach Pfeffer pisze: > One thing I'd like to see ASAP with LAVA is to list the build that was > tested on the test results page. It is listed, unless I'm mistaken: http://validation.linaro.org/launch-control/dashboard/test-results/399109/ See the "Android.URL" below. > Then I'd like to see a link from a android-build.linaro.org build like: > > https://android-build.linaro.org/builds/~linaro-android/leb-panda/ This is a little bit more complex. Whatever submits the result can build an URL to the result page on the dashboard. The problem is that the android build system has no knowledge of tests. Ideally each build would trigger a test to be scheduled, results of each test should be uploaded to the dashboard. This way we could retain identity in all participating components. Thanks ZK

12 years, 11 months

Re: Please help us setup patches.linaro.org

by Guilherme Salgado

On Thu, 2011-06-16 at 00:16 +0200, Daniel Lezcano wrote: > On 06/15/2011 03:26 PM, Guilherme Salgado wrote: > > Hi folks, > > > > http://patches.linaro.org/ went live yesterday and we need your help to > > set it up and get accurate metrics. It should take only a few minutes! > > > > The first thing we need is the HTTP URL for the upstream master branch > > of every project on the front page -- I'll take a git:// URL if that's > > all they have. If you could send me the URLs for the projects you > > contribute to, it'd be great. This has to be done only once and we'll > > use that to automatically detect when a patch is committed upstream. > > http://git.linaro.org/git/tools/powerdebug.git > > http://git.linaro.org/git/tools/pm-qa.git I've created new projects for those two. Thanks! > > [ ... ] > > > Similarly, if any of the patches you see there have been superseded or > > rejected, please do mark them as such. You can do bulk changes there > > selecting the patches and using the form at the bottom. > > > > Finally, although we do our best to place patches under the appropriate > > projects, sometimes we're not able to (e.g. when patches are sent *only* > > to patches(a)l.o), and in these cases they need to be moved manually. The > > list of patches for which we couldn't find a project are at > > > > http://patches.linaro.org/patchwork/project/other-unknown/list/ > > The two projects are hosted at git.linaro.org and belongs to linaro. The > mailing list is linaro-dev@. If I understood correctly with this email > address you can't find to which project the patchset I will send for > powerdebug is related to, right ? Yep, that's correct. > > I sent a patchset with "powerdebug" keyword in the subject prefix. > Assuming you create the "powerdebug" project, will the next patchset go > to the right project ? Or do I have to move the patchset to the right > project manually using the form ? We don't do that right now, so yes, you'll need to move them using the form. However, I think it'd be possible to match the prefix to an existing project when all else fails. A custom email header would be more robust but I understand that a prefix is probably easier to use. What do you think? -- Guilherme Salgado <https://launchpad.net/~salgado>

12 years, 11 months

[PATCH v7 00/11] mmc: use nonblock mmc requests to minimize latency

by Per Forlin

** Rebased and verified patchset on linux-linaro-2.6.39 ** This patchset needs this commit to be merged in linux-linaro-2.6.39 in order to apply. ------------------------------------ commit 473ba41dcc70a7977031db7fcbc5638097ca6a3a Author: Andrei Warkentin <andreiw(a)motorola.com> Date: Mon Apr 11 18:10:24 2011 -0500 mmc: card: block.c cleanup for host claim/release. ------------------------------------ How significant is the cache maintenance over head? It depends, the eMMC are much faster now compared to a few years ago and cache maintenance cost more due to multiple cache levels and speculative cache pre-fetch. In relation the cost for handling the caches have increased and is now a bottle neck dealing with fast eMMC together with DMA. The intention for introducing non-blocking mmc requests is to minimize the time between a mmc request ends and another mmc request starts. In the current implementation the MMC controller is idle when dma_map_sg and dma_unmap_sg is processing. Introducing non-blocking mmc request makes it possible to prepare the caches for next job in parallel to an active mmc request. This is done by making the issue_rw_rq() non-blocking. The increase in throughput is proportional to the time it takes to prepare (major part of preparations is dma_map_sg and dma_unmap_sg) a request and how fast the memory is. The faster the MMC/SD is the more significant the prepare request time becomes. Measurements on U5500 and Panda on eMMC and SD shows significant performance gain for large reads when running DMA mode. In the PIO case the performance is unchanged. There are two optional hooks pre_req() and post_req() that the host driver may implement in order to move work to before and after the actual mmc_request function is called. In the DMA case pre_req() may do dma_map_sg() and prepare the dma descriptor and post_req runs the dma_unmap_sg. Details on measurements from IOZone and mmc_test: https://wiki.linaro.org/WorkingGroups/Kernel/Specs/StoragePerfMMC-async-req Changes since v6: * minor update of doc for mmc_start_req and code clean up. * Indentifed a bug running tests on ext4 with discard enable. The test procedure is documented here: https://wiki.linaro.org/WorkingGroups/Kernel/Specs/StoragePerfMMC-async-req… * Resolved bug by preventing mmc async request run in parallel to discard (mmc_erase). Per Forlin (11): mmc: add non-blocking mmc request function omap_hsmmc: add support for pre_req and post_req mmci: implement pre_req() and post_req() mmc: mmc_test: add debugfs file to list all tests mmc: mmc_test: add test for non-blocking transfers mmc: add member in mmc queue struct to hold request data mmc: add a block request prepare function mmc: move error code in mmc_block_issue_rw_rq to a separate function. mmc: add a second mmc queue request member mmc: test: add random fault injection in core.c mmc: add handling for two parallel block requests in issue_rw_rq drivers/mmc/card/block.c | 454 +++++++++++++++++++++++++---------------- drivers/mmc/card/mmc_test.c | 361 +++++++++++++++++++++++++++++++- drivers/mmc/card/queue.c | 184 +++++++++++------ drivers/mmc/card/queue.h | 32 +++- drivers/mmc/core/core.c | 164 ++++++++++++++- drivers/mmc/core/debugfs.c | 5 + drivers/mmc/host/mmci.c | 146 ++++++++++++-- drivers/mmc/host/mmci.h | 8 + drivers/mmc/host/omap_hsmmc.c | 87 ++++++++- include/linux/mmc/core.h | 6 +- include/linux/mmc/host.h | 24 +++ lib/Kconfig.debug | 11 + 12 files changed, 1193 insertions(+), 289 deletions(-) -- 1.7.4.1

12 years, 11 months

[powerdebug 1/2] reset scrolling when selecting an item in the search list

by Daniel Lezcano

Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> --- display.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/display.c b/display.c index 8f442c1..0cfbf94 100644 --- a/display.c +++ b/display.c @@ -472,6 +472,9 @@ static int display_find_keystroke(int fd, void *data) if (windata[current_win].ops->selectf()) return -1; + windata[current_win].cursor = 0; + windata[current_win].scrolling = 0; + return 0; default: -- 1.7.1

12 years, 11 months

unable to start compiled 2.6.39-linaro-kernel for panda board

by Belisko Marek

Hello, I'm trying to build my own kernel for pandaboard based on : git://git.linaro.org/kernel/linux-linaro-2.6.39.git I use omap2plus_defconfig and enable LAN + wifi. Compile uImage, put to boot of SD card. Kernel is loaded properly but this is last message: Starting kernel ... Uncompressing Linux... done, booting the kernel. Try to enable DEBUG_LL but result is same. Is there any problem with this repo? With prebuild uImage (from ubuntu) it works fine. Thanks in advance, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite icq: 290551086 web: http://open-nandra.com

12 years, 11 months

device tree stuff for linaro-2.6.39

by John Rigby

Nicolas, Is device tree stuff equivalent to what was in .38 going in? I'm looking for the equivalent of what went into .38 in commit 3fb7bd037f31f5acdc213c0eb431c07a38803445 Merge branch 'devicetree/arm-linaro-2.6.38' of git://git.secretlab.ca/git/linux-2.6 into linaro-2.6.38 Thanks, John

12 years, 11 months

[PATCH 0/2] video: Make omap2 support conditional

by Tushar Behera

Currently drivers/video/omap2 is built by default with every configuration of the kernel. Current patchset makes the omap2 video support conditional on appropriate config option. [Patch 2/2] was first generated, but that resulted in a build error. [Patch 1/2] was created to fix that build error. These patches have only been tested for build consistency and have not been tested on any related hardware. Tushar Behera (2): config: omap2+: force fb and dss support as built-in video: omap2: Compile omap2 support only when needed arch/arm/configs/omap2plus_defconfig | 4 ++-- drivers/video/Makefile | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) -- 1.7.4.1

12 years, 11 months

← Newer
1
...
7
8
9
10
11
12
13
...
20
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev June 2011