linaro-dev July 2014

linaro-dev@lists.linaro.org

23 participants
48 discussions

by Bernhard Rosenkränzer

== Progress == * started an AOSP master Galaxy Nexus build * started porting aarch64 Bionic improvements to armv7 * started toolchain 2014.07 builds == Plans == * finish toolchain 2014.07 builds * go to Cambridge to run aarch64 tests == Issues == * need aarch64 hardware. Badly.

9 years, 9 months

[Activity] week 29

by Riku Voipio

== Progress == * Xen for ARMv8 (CARD-736: 80%) * Crossbuild of xen for ARMv8 * Made NFS tarball for xen testing * Found workaround to boot xen and dom0 in lava * CI loop maintainence (20%) * investigated libvirt ci * minor fixes for kvm and xen loops == Plans == * Finish Xen ARMv8 loop: * build dom0/domU in jenkins * make 64bit guestfs for Xen/lava == Issues ==

9 years, 9 months

[PATCH PM-QA] Test.mk: Fix make error 1 issues

by Lisa Nguyen

Modify Test.mk to resolve the following build error: make: [uncheck] Error 1 (ignored). Signed-off-by: Lisa Nguyen <lisa.nguyen(a)linaro.org> --- Test.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Test.mk b/Test.mk index 89e5cd9..9fad2c4 100644 --- a/Test.mk +++ b/Test.mk @@ -22,7 +22,7 @@ # - initial API and implementation SNT=$(wildcard *sanity.sh) -TST=$(wildcard *[^(sanity)].sh) +TST=$(wildcard *[^{sanity}].sh) LOG=$(TST:.sh=.log) CFLAGS?=-g -Wall -pthread CC?=gcc @@ -57,6 +57,6 @@ clean: rm -f *.o $(EXEC) uncheck: - -@test ! -z "$(LOG)" && rm -f $(LOG) + -$(shell test ! -z "$(LOG)" && rm -f $(LOG)) recheck: uncheck check -- 1.7.9.5

9 years, 9 months

Problem booting using latest linaro-linux-tracking (3.16.0-rc5)/mainline kernel (3.16.0-rc4) on Samsung Arndale Baord

by Mohammad Merajul Islam Molla

Hello, I am having problem booting from latest linaro-linux-tracking (3.16.0-rc5) on Samsung Arndale Board (with two cpus). The same thing happens with mainline kernel (3.16.0-rc4). Here is what happens - 1. During build I got the error message - LD sound/built-in.o MK_FW firmware/edid-1920x1080.fw.gen.S make[1]: *** No rule to make target `firmware/edid-1920x1080.fw', needed by `firmware/edid-1920x1080.fw.gen.o'. Stop. make: *** [firmware] Error 2 I set CONFIG_EXTRA_FIRMWARE="" and could proceed with build. 2. At the end of build I got the below error message - Kernel: arch/arm/boot/zImage is ready multiple (or no) load addresses: This is incompatible with uImages Specify LOADADDR on the commandline to build an uImage make[1]: *** [arch/arm/boot/uImage] Error 1 make: *** [uImage] Error 2 I passed loadaddr as parameter - make uImage LOADADDR=0x40008000 (this address I got from build output of linux-linaro-tracking 3.14.0). With this build was successful and uImage generated. 3. After that I got the following log during boot - [ 1.125626] Trying to unpack rootfs image as initramfs... [ 1.243435] Freeing initrd memory: 2384K (82001000 - 82255000) [ 1.243760] hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 7 counters available [ 1.244915] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.244991] audit: initializing netlink subsys (disabled) [ 1.245035] audit: type=2000 audit(1.225:1): initialized [ 1.246360] VFS: Disk quotas dquot_6.5.2 [ 1.246428] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.247297] NFS: Registering the id_resolver key type [ 1.247335] Key type id_resolver registered [ 1.247350] Key type id_legacy registered [ 1.247403] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.247775] msgmni has been set to 3482 [ 1.249383] bounce: pool size: 64 pages [ 1.249440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.249462] io scheduler noop registered [ 1.249479] io scheduler deadline registered [ 1.249512] io scheduler cfq registered (default) [ 1.260046] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 1.260068] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.263447] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 1.263467] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.264525] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 1.264545] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.265467] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 1.265486] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.265562] xenfs: not registering filesystem on non-xen platform [ 1.335655] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.337195] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 1.337589] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 1.338017] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 2.275531] console [ttySAC2] enabled [ 2.279568] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 2.288628] [drm] Initialized drm 1.1.0 20060810 [ 2.300603] [drm:hdmi_probe] *ERROR* syscon regmap lookup failed. [ 2.305611] platform 14530000.hdmi: Driver exynos-hdmi requests probe deferral [ 2.320592] brd: module loaded [ 2.326213] loop: module loaded [ 2.328789] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.334354] tun: Universal TUN/TAP device driver, 1.6 [ 2.339351] tun: (C) 1999-2004 Max Krasnyansky <maxk(a)qualcomm.com> [ 2.345896] usbcore: registered new interface driver asix [ 2.350960] usbcore: registered new interface driver ax88179_178a [ 2.357027] usbcore: registered new interface driver cdc_ether [ 2.362843] usbcore: registered new interface driver dm9601 [ 2.368402] usbcore: registered new interface driver net1080 [ 2.374039] usbcore: registered new interface driver cdc_subset [ 2.379945] usbcore: registered new interface driver zaurus [ 2.385498] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 2.392913] usbcore: registered new interface driver cdc_ncm [ 2.399041] usb@12000000 supply vdd33 not found, using dummy regulator [ 2.405044] usb@12000000 supply vdd10 not found, using dummy regulator [ 2.411844] platform 12000000.dwc3: Driver dwc3 requests probe deferral [ 2.418250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.424599] ehci-pci: EHCI PCI platform driver [ 2.429075] ehci-exynos: EHCI EXYNOS driver [ 2.433439] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.439368] ohci-pci: OHCI PCI platform driver [ 2.443831] ohci-exynos: OHCI EXYNOS driver [ 2.448256] usbcore: registered new interface driver usb-storage [ 2.462756] usb3503 usb_hub_bus:usb_hub: switched to HUB mode [ 2.467037] usb3503 usb_hub_bus:usb_hub: usb3503_probe: probed in hub mode [ 2.474499] samsung-usb3phy 12100000.usbphy: Can't get usb-phy sysreg cfg register [ 2.482379] mousedev: PS/2 mouse device common for all mice [ 2.487859] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.493050] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc0 [ 2.498744] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it [ 2.506404] 10060000.tmu supply vtmu not found, using dummy regulator [ 2.512972] exynos-tmu 10060000.tmu: Exynos: Thermal zone(therm_zone0) registered [ 2.520421] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel(a)redhat.com [ 2.539598] Synopsys Designware Multimedia Card Interface Driver [ 2.544808] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 2.550567] dwmmc_exynos 12200000.mmc: Version ID is 241a [ 2.556606] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 107, 32 bit host data width, 128 deep fifo [ 2.592839] dwmmc_exynos 12200000.mmc: 1 slots initialized [ 2.597196] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 2.603300] dwmmc_exynos 12220000.mmc: Version ID is 241a [ 2.609998] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo [ 2.647788] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 2.652056] usbcore: registered new interface driver usbhid [ 2.657359] usbhid: USB HID core driver [ 2.662438] oprofile: using timer interrupt. [ 2.665558] TCP: cubic registered [ 2.668730] Initializing XFRM netlink socket [ 2.673030] NET: Registered protocol family 10 [ 2.677915] sit: IPv6 over IPv4 tunneling driver [ 2.682464] NET: Registered protocol family 17 [ 2.686472] NET: Registered protocol family 15 [ 2.690938] Key type dns_resolver registered [ 2.695208] Registering SWP/SWPB emulation handler [ 2.700832] Btrfs loaded [ 2.702450] AppArmor: AppArmor sha1 policy hashing enabled [ 2.708691] mfc-power-domain: Power-off latency exceeded, new value 8731958 ns [ 2.715660] gsc-power-domain: Power-off latency exceeded, new value 308750 ns [ 2.725830] mmc0: BKOPS_EN bit is not set [ 2.729770] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 2.738186] [drm:hdmi_probe] *ERROR* syscon regmap lookup failed. [ 2.744521] platform 14530000.hdmi: Driver exynos-hdmi requests probe deferral [ 2.952480] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 2.960942] mmc0: new DDR MMC card at address 0001 [ 2.966013] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB [ 2.970244] mmcblk0boot0: mmc0:0001 M4G1FB partition 1 1.00 MiB [ 2.976150] mmcblk0boot1: mmc0:0001 M4G1FB partition 2 1.00 MiB [ 2.982039] mmcblk0rpmb: mmc0:0001 M4G1FB partition 3 128 KiB [ 2.989206] mmcblk0: p1 p2 p3 p4 [ 2.993050] mmcblk0boot1: unknown partition table [ 2.997278] mmcblk0boot0: unknown partition table [ 3.008951] [drm:hdmi_probe] *ERROR* syscon regmap lookup failed. [ 3.013956] platform 14530000.hdmi: Driver exynos-hdmi requests probe deferral [ 3.029510] [drm:hdmi_probe] *ERROR* syscon regmap lookup failed. [ 3.034475] platform 14530000.hdmi: Driver exynos-hdmi requests probe deferral [ 3.042326] input: gpio_keys as /devices/gpio_keys/input/input0 [ 3.047643] s3c-rtc 101e0000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.080561] vdd_g3d: disabling [ 3.100380] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.108670] mmc1: new high speed SDHC card at address aaaa [ 3.114356] VDD_IOPERI_1.8V: disabling [ 3.117998] mmcblk1: mmc1:aaaa SU04G 3.69 GiB [ 3.124076] mmcblk1: p1 p2 p3 [ 3.126718] hdmi-en: disabling [ 3.128710] MAIN_DC: disabling [ 3.132350] ALSA device list: [ 3.134687] No soundcards found. [ 3.139126] Freeing unused kernel memory: 472K (8077c000 - 807f2000) [ 3.152292] [drm:hdmi_probe] *ERROR* syscon regmap lookup failed. [ 3.157359] platform 14530000.hdmi: Driver exynos-hdmi requests probe deferral Loading, please wait... [ 3.172053] [drm:hdmi_probe] *ERROR* syscon regmap lookup failed. [ 3.177045] platform 14530000.hdmi: Driver exynos-hdmi requests probe deferral [ 3.204532] systemd-udevd[1350]: starting version 204 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 3.749107] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 3.841975] random: nonblocking pool is initialized [ 4.987813] init: ureadahead main process (1399) terminated with status 5 [ 5.859210] EXT4-fs (mmcblk1p3): re-mounted. Opts: errors=remount-ro [ 7.738335] CPU1: failed to boot: -19 Looks like CPU1 failed to boot. But on the same board, using same SD card and linux-linaro-tracking v3.14.0 it boots successfully. 4. Tried to boot passing argument 'maxcpus=1' via uboot but keeps getting the same error. 5. Tried to build kernel without SMP support and keeps getting the below build error - scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CALL scripts/checksyscalls.sh CHK include/generated/compile.h CC arch/arm/kernel/process.o In file included from ./arch/arm/include/asm/hardirq.h:6:0, from include/linux/hardirq.h:8, from include/linux/interrupt.h:12, from arch/arm/kernel/process.c:22: ./arch/arm/include/asm/irq.h:39:40: error: conflicting types for ‘arch_trigger_all_cpu_backtrace’ #define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace ^ arch/arm/kernel/process.c:69:6: note: in expansion of macro ‘arch_trigger_all_cpu_backtrace’ void arch_trigger_all_cpu_backtrace(void) ^ ./arch/arm/include/asm/irq.h:38:6: note: previous declaration of ‘arch_trigger_all_cpu_backtrace’ was here void arch_trigger_all_cpu_backtrace(bool); ^ make[1]: *** [arch/arm/kernel/process.o] Error 1 config file attached. Using same config file, I don't get any build error mentioned in 1 & 2 with linaro-linux-tracking v3.14.0 and it boots ok. Is there something I am doing wrong or is it problem with recent kernel? -- Thanks, -Meraj

9 years, 9 months

[PATCH PMQA] cpuidle: increase wait time for child to finish

by Sanjay Singh Rawat

- fix for bug 152 on Panda, wait for more time for child to finish - don't wait for child pid for offlined cpus - bug 152 Signed-off-by: Sanjay Singh Rawat <sanjay.rawat(a)linaro.org> --- cpuidle/cpuidle_killer.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/cpuidle/cpuidle_killer.c b/cpuidle/cpuidle_killer.c index ae3b54f..49fe1ea 100644 --- a/cpuidle/cpuidle_killer.c +++ b/cpuidle/cpuidle_killer.c @@ -181,11 +181,17 @@ int main(int argc, char *argv[]) signal(SIGALRM, timeout); - alarm(DURATION + 5); + alarm(DURATION + 20); for (i = 0; i < nrcpus; i++) { int status; + /* skip for offline cpus */ + if (!pids[i]) { + fprintf(stderr, "no_wait_for_process on cpu %d\n", i); + continue; + } + waitpid(pids[i], &status, 0); if (status != 0) { fprintf(stderr, "test for cpu %d has failed\n", i); -- 1.8.3.2

9 years, 9 months

[PATCH PM-QA] heat_cpu: fix race condition

by Mohammad Merajul Islam Molla

fixes race condition that exists between do_loop() and sched_setaffinity() on android. due to synchronization problem, sched_setaffinity() was setting affinity for thr_id 0 randomly. also, allocate the thr_id's dynamically instead of fixed array size 3. tested on Linaro Android 14.04. Signed-off-by: Mohammad Merajul Islam Molla <meraj.enigma(a)gmail.com> --- utils/heat_cpu.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/utils/heat_cpu.c b/utils/heat_cpu.c index 02e0b6d..716cd56 100644 --- a/utils/heat_cpu.c +++ b/utils/heat_cpu.c @@ -47,17 +47,14 @@ #include <string.h> #include <math.h> -#define NR_THREAD 3 - int cont = 1; int cpu_index; long long a = 1, c = 1; float f = M_PI; -pid_t thr_id[NR_THREAD]; +pid_t *thr_id; int moderate_inst; - #ifdef ANDROID int conditionMet; pthread_cond_t cond = PTHREAD_COND_INITIALIZER; @@ -72,11 +69,11 @@ void *do_loop(void *data) a = 1; c = 1; #ifdef ANDROID + pthread_mutex_lock(&mutex); long int thread = (long int) data; thr_id[thread] = gettid(); - pthread_mutex_lock(&mutex); - while (!conditionMet) - pthread_cond_wait(&cond, &mutex); + conditionMet = 1; + pthread_cond_broadcast(&cond); pthread_mutex_unlock(&mutex); #endif @@ -112,6 +109,12 @@ int main(int arg_count, char *argv[]) } } + thr_id = (pid_t *) calloc(num_cpus, sizeof(pid_t)); + if (thr_id == NULL) { + printf("ERROR: out of memory\n"); + return -1; + } + /* clear out cpus */ CPU_ZERO(&cpuset); @@ -161,8 +164,7 @@ int main(int arg_count, char *argv[]) return ret; } #endif - CPU_CLR(i, &cpuset); - + CPU_CLR(i, &cpuset); } for (i = 0; i < num_cpus; i++) { @@ -176,23 +178,24 @@ int main(int arg_count, char *argv[]) CPU_ZERO(&cpuset); CPU_SET(i, &cpuset); + pthread_mutex_lock(&mutex); + while (!conditionMet) + pthread_cond_wait(&cond, &mutex); + ret = sched_setaffinity(thr_id[i], sizeof(cpuset), &cpuset); if (ret) { printf("Error setting affinity on pthread th_id\n"); printf("Error: %s\n", strerror(ret)); return ret; } -#endif - } -#ifdef ANDROID - pthread_mutex_lock(&mutex); - conditionMet = 1; - pthread_cond_broadcast(&cond); - pthread_mutex_unlock(&mutex); + conditionMet = 0; + pthread_mutex_unlock(&mutex); #endif + } while (1) sleep(1); + return 0; } -- 1.8.1.2 -- Thanks, -Meraj

9 years, 9 months

[ACTIVITY] week 28

by Dileep Katta

== Progress == * Enabling UEFI Fastboot on Panda - on hold (CARD-198: 0 %) * CARD 1103: Flash support on u-boot fastboot, Added DFU APIs, made a commit (CARD-1103: 70%) * CARD 1103: Flash support on u-boot fastboot, Fixing issues with DFU code in Flashing command (CARD-1103: 30%) == Plans == * CARD-198: Pause (0%) * CARD 1103: Flash support on u-boot fastboot, fixing Partition identification issues, Making flashing command work (CARD-1103: 100%) == Issues == * None

9 years, 9 months

[ACTIVITY] Week28

by Wookey

== Progress == * Buildd-tending: Debian arm64 is at 80% built (DEVPLAT-226: 5%) http://buildd.debian-ports.org/stats/graph-quarter-big.png * NMUed 20-odd packages with arm64 fixes. (DEVPLAT-221: 20%) * NMUed fixed SCC packages: libgc, libfcgi, corosync, soprano, openais (DEVPLAT-226: 20%) * Fixed and NMUed SCC package: radvd, gtklext, policykit-1 (DEVPLAT-226: 10%) * Investigated and filed bugs for icu, keyutils (DEVPLAT-226: 5%) * Worked with upstream to fix elfutils (DEVPLAT-226: 5%) * Fixed openjdk/zookeeper missing save_sp_reg patch (DEVPLAT-219: 10%) * Updated/uploaded cross-binutils package (now in Archive) (DEVPLAT-220) (5%) * Finalised Bootstrap/crossbuild sprint for Paris/August (20%) * Extended sortblockers script to generate outofdate list: http://people.debian.org/~wookey/bootstrap/outofdatelist (2%) * Investigated crappy connection to china (losing 60% of my packets). V annoying.(10%) * Badgered ARM re hardware for arm64 port. == Plans == * Fix/NMU remaining packages in SCC http://people.debian.org/~wookey/bootstrap/blockerlist * Investigate PDF build errors. * Mail release team about arm64 prospects == Issues == Network conenction to china is often very flaky. Duploads fail repeatedly and intereactive use over mosh stalls a lot. Frustrating. Wookey -- Principal hats: Linaro, Emdebian, Wookware, Balloonboard, ARM http://wookware.org/

9 years, 9 months

[ACTIVITY] Week 28

by Harigopal Gollamudi

== Progress == DEVPLAT-238: CI Loop for LSK 3.14 kernel for ARMv7 and ARMv8 == Plans == Booting Vayu board deployed in Lava lab with Android binaries == Issues == None -- Thanks and Regards, HariGopal G Android Engineer

9 years, 9 months

[ACTIVITY] week 28

by Bernhard Rosenkränzer

== Progress == * New Bionic memchr() for Aarch64 * zlib optimization analyzis * started some cbuildv2 toolchain builds for testing * restored Galaxy Nexus support in Android builds (4.4.4) * participated in calls about the Android microconf at LPC2014 == Plans == * Fix issues with cbuildv2 toolchain builds * check if AOSP master can run on Galaxy Nexus * Port some recent Bionic aarch64 improvements to armv7 == Issues == * ci.linaro.org is broken

9 years, 9 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev July 2014