CC: Jason Hui jason.hui@linaro.org CC: patches@linaro.org Signed-off-by: John Stultz john.stultz@linaro.org --- arch/arm/configs/Kconfig.omap3 | 141 ++++++++++++++++++++++++++++++++++++++++ 1 files changed, 141 insertions(+), 0 deletions(-) create mode 100644 arch/arm/configs/Kconfig.omap3
diff --git a/arch/arm/configs/Kconfig.omap3 b/arch/arm/configs/Kconfig.omap3 new file mode 100644 index 0000000..82847cf --- /dev/null +++ b/arch/arm/configs/Kconfig.omap3 @@ -0,0 +1,141 @@ +config generateconfig_OMAP3_YES + def_bool y + + + select ARM + select ARCH_OMAP + select ARCH_OMAP3 + select OMAP_RESET_CLOCKS + + select SMP + select EXPERIMENTAL + + select OMAP3_EMU + + select ARM_THUMBEE + select ARM_ERRATA_430973 + + select CPU_FREQ + select CPU_FREQ_STAT_DETAILS + select CPU_FREQ_GOV_POWERSAVE + select CPU_FREQ_GOV_USERSPACE + select CPU_FREQ_GOV_ONDEMAND + select CPU_FREQ_GOV_CONSERVATIVE + select CPU_IDLE + + select TI_DAVINCI_EMAC + select TI_DAVINCI_MDIO + select TI_DAVINCI_CPDMA + + select USB_EHCI_HCD + select USB_EHCI_ROOT_HUB_TT + + select NET + select NETDEVICES + select NET_ETHERNET + + select SPI + select GPIOLIB + select SYSFS + + select SND + select SOUND + select SND_OMAP + select SND_SOC + + select USB_NET + select USB_USBNET + select USB + + select PARPORT + + select FB + + select TWL4030_CORE + + select RTC_CLASS + select I2C + select RTC_DRV_M41T80 + + select MTD + select MTD_NAND + select MTD_ONENAND + + select MMC + + select LEDS + + select FPE_NWFPE + + select MTD_NAND_OMAP2 + select MTD_NAND_OMAP_PREFETCH_DMA + select MTD_ONENAND_VERIFY_WRITE + select MTD_ONENAND_2X_PROGRAM + + select PARPORT_1284 + + select MMC_OMAP_HS + select BACKLIGHT_LCD_SUPPORT + select OABI_COMPAT + + select USB_NET_SMSC95XX + + select GPIO_SYSFS + select SND_OMAP_SOC + + select OMAP2_DSS + select OMAP2_DSS_SDI + + select FB_OMAP2 + select PANEL_GENERIC_DPI + select PANEL_SHARP_LS037V7DW01 + select PANEL_TPO_TD043MTEA1 + + select GPIO_TWL4030 + select TWL4030_CORE + select REGULATOR_TWL4030 + select TWL4030_POWER + select GPIO_PCA953X + select GPIO_PCA953X_IRQ + + select SND_OMAP_SOC_MCBSP + select SND_OMAP_SOC_OVERO + select SND_OMAP_SOC_OMAP3EVM + + select SND_OMAP_SOC_SDP3430 + select SND_OMAP_SOC_SDP4430 + select SND_OMAP_SOC_OMAP3_PANDORA + select SND_OMAP_SOC_OMAP3_BEAGLE + select SND_OMAP_SOC_ZOOM2 + select SND_OMAP_SOC_IGEP0020 + + select INTF_ALARM + select RTC_DRV_TWL4030 + select RTC_DRV_M41T80_WDT + + + +# Enabling OMAP2 makes beagle boards not boot +config ARCH_OMAP2 + default n + +config SWP_EMULATE + default n + +config MACH_DEVKIT8000 + default n + +config MACH_CM_T35 + default n + +config USB_DEVICE_CLASS + default n + +config OMAP2_VRAM_SIZE + default 6 + + + +source "Kconfig.distro" + +source "arch/arm/Kconfig"