With Device tree, pdev->id would no longer be Valid. Hence get rid of all instances of its usage in the driver. Device tree support for the driver is added in subsequent patches.
Signed-off-by: Rajendra Nayak rnayak@ti.com --- drivers/tty/serial/omap-serial.c | 30 +++++++++++++++--------------- 1 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index f3ff0ca..a02cc9f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -115,7 +115,7 @@ static void serial_omap_enable_ms(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port;
- dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line);
pm_runtime_get_sync(&up->pdev->dev); up->ier |= UART_IER_MSI; @@ -418,7 +418,7 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port) unsigned int ret = 0;
pm_runtime_get_sync(&up->pdev->dev); - dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line); spin_lock_irqsave(&up->port.lock, flags); ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; spin_unlock_irqrestore(&up->port.lock, flags); @@ -436,7 +436,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port) status = check_modem_status(up); pm_runtime_put(&up->pdev->dev);
- dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
if (status & UART_MSR_DCD) ret |= TIOCM_CAR; @@ -454,7 +454,7 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned char mcr = 0;
- dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line); if (mctrl & TIOCM_RTS) mcr |= UART_MCR_RTS; if (mctrl & TIOCM_DTR) @@ -478,7 +478,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned long flags = 0;
- dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line); pm_runtime_get_sync(&up->pdev->dev); spin_lock_irqsave(&up->port.lock, flags); if (break_state == -1) @@ -504,7 +504,7 @@ static int serial_omap_startup(struct uart_port *port) if (retval) return retval;
- dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
pm_runtime_get_sync(&up->pdev->dev); /* @@ -545,7 +545,7 @@ static int serial_omap_startup(struct uart_port *port) 0); init_timer(&(up->uart_dma.rx_timer)); up->uart_dma.rx_timer.function = serial_omap_rxdma_poll; - up->uart_dma.rx_timer.data = up->pdev->id; + up->uart_dma.rx_timer.data = up->port.line; /* Currently the buffer size is 4KB. Can increase it */ up->uart_dma.rx_buf = dma_alloc_coherent(NULL, up->uart_dma.rx_buf_size, @@ -573,7 +573,7 @@ static void serial_omap_shutdown(struct uart_port *port) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned long flags = 0;
- dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line);
pm_runtime_get_sync(&up->pdev->dev); /* @@ -883,7 +883,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&up->port.lock, flags); pm_runtime_put(&up->pdev->dev); - dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line); }
static void @@ -893,7 +893,7 @@ serial_omap_pm(struct uart_port *port, unsigned int state, struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned char efr;
- dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
pm_runtime_get_sync(&up->pdev->dev); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -932,7 +932,7 @@ static void serial_omap_config_port(struct uart_port *port, int flags) struct uart_omap_port *up = (struct uart_omap_port *)port;
dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", - up->pdev->id); + up->port.line); up->port.type = PORT_OMAP; }
@@ -949,7 +949,7 @@ serial_omap_type(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port;
- dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line); return up->name; }
@@ -1110,7 +1110,7 @@ static struct console serial_omap_console = {
static void serial_omap_add_console_port(struct uart_omap_port *up) { - serial_omap_console_ports[up->pdev->id] = up; + serial_omap_console_ports[up->port.line] = up; }
#define OMAP_CONSOLE (&serial_omap_console) @@ -1364,7 +1364,6 @@ static int serial_omap_probe(struct platform_device *pdev) ret = -ENOMEM; goto do_release_region; } - sprintf(up->name, "OMAP UART%d", pdev->id); up->pdev = pdev; up->port.dev = &pdev->dev; up->port.type = PORT_OMAP; @@ -1375,6 +1374,7 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.fifosize = 64; up->port.ops = &serial_omap_pops; up->port.line = pdev->id; + sprintf(up->name, "OMAP UART%d", up->port.line);
up->port.mapbase = mem->start; up->port.membase = ioremap(mem->start, resource_size(mem)); @@ -1417,7 +1417,7 @@ static int serial_omap_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev);
- ui[pdev->id] = up; + ui[up->port.line] = up; serial_omap_add_console_port(up);
ret = uart_add_one_port(&serial_omap_reg, &up->port);