From: Jason Liu r64343@freescale.com
This patchset adds Freescale i.mx51 device tree support. This is based on
git://git.secretlab.ca/git/linux-2.6 devicetree/test
This patch has been tested on MX51 babbage board and can boot up succesfully to linux console with DT enabled.
Grant, I think it's almost ready for you to merge it.
V3: - prefix the property name with the vendor name as like: "fsl,has-rts-cts" and "fsl,irda-mode" - use the ttymxc0 as the console - add FEC support, nfs can be used now
Jason Liu (5): arm/dt: add basic mx51 device tree support arm/dt: add very basic dts file for babbage board serial/imx: parse from device tree support net/fec: check id_entry pointer before using it net/fec: add device tree matching support
arch/arm/boot/dts/babbage.dts | 110 +++++++++++++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 8 ++ arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/board-dt.c | 64 ++++++++++++++++++ arch/arm/mach-mx5/clock-mx51-mx53.c | 43 ++++++++++++- arch/arm/plat-mxc/include/mach/common.h | 1 + drivers/net/fec.c | 25 +++++-- drivers/tty/serial/imx.c | 79 +++++++++++++++++++--- 8 files changed, 314 insertions(+), 17 deletions(-) create mode 100644 arch/arm/boot/dts/babbage.dts create mode 100644 arch/arm/mach-mx5/board-dt.c