On Thu, 29 Nov 2012, Rajanikanth H.V wrote:
From: "Rajanikanth H.V" rajanikanth.hv@stericsson.com
property, battery-type shall be one of supported technology type instead blank
- refer: Documentation/devicetree/bindings/power_supply/ab8500/fg.txt for the list supported types
- this patch appends to ab8500 bm devs DT binding patch set ref: commit-id e0f1abeba5c2d8a2183566717d99294fd1a29c2e git://git.infradead.org/battery-2.6.git
- promote ab8500_fg probe to happen before ab8500_btemp probe as btemp driver depends on fuelgauge list, ref: ab8500_fg_get(...)
I don't much like this commit message.
Take a look at some others to see how it's normally done.
Signed-off-by: Rajanikanth H.V rajanikanth.hv@stericsson.com
drivers/power/Makefile | 2 +- drivers/power/ab8500_bmdata.c | 10 +++------- 2 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 696e3a9..070c73d 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -38,7 +38,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o -obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o +obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
This should be a separate patch.
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index 03cc528..f16b60c 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -461,7 +461,6 @@ bmdevs_of_probe(struct device *dev, struct device_node *np_bat_supply; struct abx500_bm_data *bat; const char *btech;
- char bat_tech[8]; int i, thermistor;
*battery = &ab8500_bm_data; @@ -488,12 +487,9 @@ bmdevs_of_probe(struct device *dev, "stericsson,battery-type", NULL); if (!btech) { dev_warn(dev, "missing property battery-name/type\n");
strcpy(bat_tech, "UNKNOWN");- } else {
strcpy(bat_tech, btech);
return -EINVAL;
- if (strncmp(bat_tech, "LION", 4) == 0) {
- if (strncmp(btech, "LION", 4) == 0) { bat->no_maintenance = true; bat->chg_unknown_bat = true; bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
@@ -508,7 +504,7 @@ bmdevs_of_probe(struct device *dev, if (thermistor == NTC_EXTERNAL) { btype->batres_tbl = temp_to_batres_tbl_ext_thermistor;
} else if (strncmp(bat_tech, "LION", 4) == 0) {
} else if (strncmp(btech, "LION", 4) == 0) { btype->batres_tbl = temp_to_batres_tbl_9100;
Code is good though.
Once you have a sensible commit message you can apply my Acked-by for both patches.