On Wednesday 31 August 2011 06:31 AM, Kukjin Kim wrote:
Tushar Behera wrote:
Platform data for SDHCI controller on ORIGEN board is missing the support for 8-bit bus width. The platform data is extended in sync with other EXYNOS4 machines.
Signed-off-by: Tushar Beheratushar.behera@linaro.org
arch/arm/mach-exynos4/mach-origen.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos4/mach-origen.c
b/arch/arm/mach-exynos4/mach-
origen.c index ae18812..6b6cd77 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -75,11 +75,19 @@ static struct s3c2410_uartcfg origen_uartcfgs[]
__initdata =
{ static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
+#endif };
static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
+#endif };
static struct platform_device *origen_devices[] __initdata = {
1.7.4.1
Hi Tushar,
I wonder the bus width of SDHCI controller can be changed manually on ORIGEN like SMDK board.
Thanks for your review.
On ORIGEN board, we have wire connections for HSMMC-0/2/3 between the MMC port and the SoC. Hence ideally we can work with HSMMC2 in both 4-bit and 8-bit mode. However HSMMC0 can only work in 4-bit mode.
Also IIRC WLAN would be using HSMMC-3 controller for its operations. So we would have conflict when HSMMC2 is working in 8-bit mode and WLAN is also enabled. Hence it appears better to drop this patch now.
Thanks.
Best regards, Kgene. -- Kukjin Kimkgene.kim@samsung.com, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.