As per new conventions Samsung SoC's are named as Exynos. Cortex-A9 based Soc's are named as exynos4. s5pc2xx is cortex-A9 based, hence renamed to exynos4. This is done as per kernel naming convetions.
Similerly s5pc210 is now exynos4210. Hence S5PC210/s5pc210 suffix/prefix has been renamed to EXYNOS4210/exynos4210.
Signed-off-by: Chander Kashyap chander.kashyap@linaro.org --- Changes for v2: - Removed renaming of s5p-common to exynos4-common - Renamed s5pc210 prefixes to exynos4210
MAINTAINERS | 6 +- Makefile | 2 +- arch/arm/cpu/armv7/{s5pc2xx => exynos4}/Makefile | 0 arch/arm/cpu/armv7/{s5pc2xx => exynos4}/clock.c | 50 ++++++++-------- arch/arm/cpu/armv7/{s5pc2xx => exynos4}/soc.c | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/adc.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/clk.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/clock.h | 2 +- .../asm/{arch-s5pc2xx => arch-exynos4}/cpu.h | 62 ++++++++++---------- .../asm/{arch-s5pc2xx => arch-exynos4}/gpio.h | 28 +++++----- .../asm/{arch-s5pc2xx => arch-exynos4}/mmc.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/pwm.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/sromc.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/sys_proto.h | 0 .../asm/{arch-s5pc2xx => arch-exynos4}/uart.h | 0 board/samsung/origen/lowlevel_init.S | 26 ++++---- board/samsung/origen/mem_setup.S | 12 ++-- board/samsung/origen/origen.c | 8 +- board/samsung/origen/origen_setup.h | 8 +- board/samsung/smdkv310/lowlevel_init.S | 22 ++++---- board/samsung/smdkv310/mem_setup.S | 8 +- board/samsung/smdkv310/smdkv310.c | 8 +- board/samsung/universal_c210/lowlevel_init.S | 24 ++++---- board/samsung/universal_c210/universal.c | 8 +- boards.cfg | 6 +- include/configs/origen.h | 6 +- include/configs/s5pc210_universal.h | 10 ++-- include/configs/smdkv310.h | 6 +- 28 files changed, 151 insertions(+), 151 deletions(-) rename arch/arm/cpu/armv7/{s5pc2xx => exynos4}/Makefile (100%) rename arch/arm/cpu/armv7/{s5pc2xx => exynos4}/clock.c (80%) rename arch/arm/cpu/armv7/{s5pc2xx => exynos4}/soc.c (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/adc.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/clk.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/clock.h (99%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/cpu.h (64%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/gpio.h (83%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/mmc.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/pwm.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/sromc.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/sys_proto.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos4}/uart.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS index 030fe4a..36f8400 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -690,12 +690,12 @@ Minkyu Kang mk7.kang@samsung.com
SMDKC100 ARM ARMV7 (S5PC100 SoC) s5p_goni ARM ARMV7 (S5PC110 SoC) - s5pc210_universal ARM ARMV7 (S5PC210 SoC) + s5pc210_universal ARM ARMV7 (EXYNOS4210 SoC)
Chander Kashyap k.chander@samsung.com
- origen ARM ARMV7 (S5PC210 SoC) - SMDKV310 ARM ARMV7 (S5PC210 SoC) + origen ARM ARMV7 (EXYNOS4210 SoC) + SMDKV310 ARM ARMV7 (EXYNOS4210 SoC)
Torsten Koschorrek koschorrek@synertronixx.de scb9328 ARM920T (i.MXL) diff --git a/Makefile b/Makefile index 294c762..641b644 100644 --- a/Makefile +++ b/Makefile @@ -303,7 +303,7 @@ endif ifeq ($(SOC),s5pc1xx) LIBS += $(CPUDIR)/s5p-common/libs5p-common.o endif -ifeq ($(SOC),s5pc2xx) +ifeq ($(SOC),exynos4) LIBS += $(CPUDIR)/s5p-common/libs5p-common.o endif
diff --git a/arch/arm/cpu/armv7/s5pc2xx/Makefile b/arch/arm/cpu/armv7/exynos4/Makefile similarity index 100% rename from arch/arm/cpu/armv7/s5pc2xx/Makefile rename to arch/arm/cpu/armv7/exynos4/Makefile diff --git a/arch/arm/cpu/armv7/s5pc2xx/clock.c b/arch/arm/cpu/armv7/exynos4/clock.c similarity index 80% rename from arch/arm/cpu/armv7/s5pc2xx/clock.c rename to arch/arm/cpu/armv7/exynos4/clock.c index 5ecd475..668166a 100644 --- a/arch/arm/cpu/armv7/s5pc2xx/clock.c +++ b/arch/arm/cpu/armv7/exynos4/clock.c @@ -30,11 +30,11 @@ #define CONFIG_SYS_CLK_FREQ_C210 24000000 #endif
-/* s5pc210: return pll clock frequency */ -static unsigned long s5pc210_get_pll_clk(int pllreg) +/* exynos4210: return pll clock frequency */ +static unsigned long exynos4210_get_pll_clk(int pllreg) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4210_clock *clk = + (struct exynos4210_clock *)samsung_get_base_clock(); unsigned long r, m, p, s, k = 0, mask, fout; unsigned int freq;
@@ -96,11 +96,11 @@ static unsigned long s5pc210_get_pll_clk(int pllreg) return fout; }
-/* s5pc210: return ARM clock frequency */ -static unsigned long s5pc210_get_arm_clk(void) +/* exynos4210: return ARM clock frequency */ +static unsigned long exynos4210_get_arm_clk(void) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4210_clock *clk = + (struct exynos4210_clock *)samsung_get_base_clock(); unsigned long div; unsigned long dout_apll; unsigned int apll_ratio; @@ -115,11 +115,11 @@ static unsigned long s5pc210_get_arm_clk(void) return dout_apll; }
-/* s5pc210: return pwm clock frequency */ -static unsigned long s5pc210_get_pwm_clk(void) +/* exynos4210: return pwm clock frequency */ +static unsigned long exynos4210_get_pwm_clk(void) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4210_clock *clk = + (struct exynos4210_clock *)samsung_get_base_clock(); unsigned long pclk, sclk; unsigned int sel; unsigned int ratio; @@ -158,11 +158,11 @@ static unsigned long s5pc210_get_pwm_clk(void) return pclk; }
-/* s5pc210: return uart clock frequency */ -static unsigned long s5pc210_get_uart_clk(int dev_index) +/* exynos4210: return uart clock frequency */ +static unsigned long exynos4210_get_uart_clk(int dev_index) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4210_clock *clk = + (struct exynos4210_clock *)samsung_get_base_clock(); unsigned long uclk, sclk; unsigned int sel; unsigned int ratio; @@ -205,11 +205,11 @@ static unsigned long s5pc210_get_uart_clk(int dev_index) return uclk; }
-/* s5pc210: set the mmc clock */ -static void s5pc210_set_mmc_clk(int dev_index, unsigned int div) +/* exynos4210: set the mmc clock */ +static void exynos4210_set_mmc_clk(int dev_index, unsigned int div) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4210_clock *clk = + (struct exynos4210_clock *)samsung_get_base_clock(); unsigned int addr; unsigned int val;
@@ -234,25 +234,25 @@ static void s5pc210_set_mmc_clk(int dev_index, unsigned int div)
unsigned long get_pll_clk(int pllreg) { - return s5pc210_get_pll_clk(pllreg); + return exynos4210_get_pll_clk(pllreg); }
unsigned long get_arm_clk(void) { - return s5pc210_get_arm_clk(); + return exynos4210_get_arm_clk(); }
unsigned long get_pwm_clk(void) { - return s5pc210_get_pwm_clk(); + return exynos4210_get_pwm_clk(); }
unsigned long get_uart_clk(int dev_index) { - return s5pc210_get_uart_clk(dev_index); + return exynos4210_get_uart_clk(dev_index); }
void set_mmc_clk(int dev_index, unsigned int div) { - s5pc210_set_mmc_clk(dev_index, div); + exynos4210_set_mmc_clk(dev_index, div); } diff --git a/arch/arm/cpu/armv7/s5pc2xx/soc.c b/arch/arm/cpu/armv7/exynos4/soc.c similarity index 100% rename from arch/arm/cpu/armv7/s5pc2xx/soc.c rename to arch/arm/cpu/armv7/exynos4/soc.c diff --git a/arch/arm/include/asm/arch-s5pc2xx/adc.h b/arch/arm/include/asm/arch-exynos4/adc.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/adc.h rename to arch/arm/include/asm/arch-exynos4/adc.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/clk.h b/arch/arm/include/asm/arch-exynos4/clk.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/clk.h rename to arch/arm/include/asm/arch-exynos4/clk.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/clock.h b/arch/arm/include/asm/arch-exynos4/clock.h similarity index 99% rename from arch/arm/include/asm/arch-s5pc2xx/clock.h rename to arch/arm/include/asm/arch-exynos4/clock.h index 0ff8cf8..b4190a5 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/clock.h +++ b/arch/arm/include/asm/arch-exynos4/clock.h @@ -23,7 +23,7 @@ #define __ASM_ARM_ARCH_CLOCK_H_
#ifndef __ASSEMBLY__ -struct s5pc210_clock { +struct exynos4210_clock { unsigned char res1[0x4200]; unsigned int src_leftbus; unsigned char res2[0x1fc]; diff --git a/arch/arm/include/asm/arch-s5pc2xx/cpu.h b/arch/arm/include/asm/arch-exynos4/cpu.h similarity index 64% rename from arch/arm/include/asm/arch-s5pc2xx/cpu.h rename to arch/arm/include/asm/arch-exynos4/cpu.h index f9015c7..905f38c 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/cpu.h +++ b/arch/arm/include/asm/arch-exynos4/cpu.h @@ -19,33 +19,33 @@ * */
-#ifndef _S5PC2XX_CPU_H -#define _S5PC2XX_CPU_H +#ifndef _EXYNOS4_CPU_H +#define _EXYNOS4_CPU_H
#define S5PC2XX_ADDR_BASE 0x10000000
-/* S5PC210 */ -#define S5PC210_GPIO_PART3_BASE 0x03860000 -#define S5PC210_PRO_ID 0x10000000 -#define S5PC210_POWER_BASE 0x10020000 -#define S5PC210_SWRESET 0x10020400 -#define S5PC210_CLOCK_BASE 0x10030000 -#define S5PC210_SYSTIMER_BASE 0x10050000 -#define S5PC210_WATCHDOG_BASE 0x10060000 -#define S5PC210_MIU_BASE 0x10600000 -#define S5PC210_DMC0_BASE 0x10400000 -#define S5PC210_DMC1_BASE 0x10410000 -#define S5PC210_GPIO_PART2_BASE 0x11000000 -#define S5PC210_GPIO_PART1_BASE 0x11400000 -#define S5PC210_FIMD_BASE 0x11C00000 -#define S5PC210_USBOTG_BASE 0x12480000 -#define S5PC210_MMC_BASE 0x12510000 -#define S5PC210_SROMC_BASE 0x12570000 -#define S5PC210_USBPHY_BASE 0x125B0000 -#define S5PC210_UART_BASE 0x13800000 -#define S5PC210_ADC_BASE 0x13910000 -#define S5PC210_PWMTIMER_BASE 0x139D0000 -#define S5PC210_MODEM_BASE 0x13A00000 +/* EXYNOS4210 */ +#define EXYNOS4210_GPIO_PART3_BASE 0x03860000 +#define EXYNOS4210_PRO_ID 0x10000000 +#define EXYNOS4210_POWER_BASE 0x10020000 +#define EXYNOS4210_SWRESET 0x10020400 +#define EXYNOS4210_CLOCK_BASE 0x10030000 +#define EXYNOS4210_SYSTIMER_BASE 0x10050000 +#define EXYNOS4210_WATCHDOG_BASE 0x10060000 +#define EXYNOS4210_MIU_BASE 0x10600000 +#define EXYNOS4210_DMC0_BASE 0x10400000 +#define EXYNOS4210_DMC1_BASE 0x10410000 +#define EXYNOS4210_GPIO_PART2_BASE 0x11000000 +#define EXYNOS4210_GPIO_PART1_BASE 0x11400000 +#define EXYNOS4210_FIMD_BASE 0x11C00000 +#define EXYNOS4210_USBOTG_BASE 0x12480000 +#define EXYNOS4210_MMC_BASE 0x12510000 +#define EXYNOS4210_SROMC_BASE 0x12570000 +#define EXYNOS4210_USBPHY_BASE 0x125B0000 +#define EXYNOS4210_UART_BASE 0x13800000 +#define EXYNOS4210_ADC_BASE 0x13910000 +#define EXYNOS4210_PWMTIMER_BASE 0x139D0000 +#define EXYNOS4210_MODEM_BASE 0x13A00000
#ifndef __ASSEMBLY__ #include <asm/io.h> @@ -60,12 +60,12 @@ static inline int s5p_get_cpu_rev(void)
static inline void s5p_set_cpu_id(void) { - s5p_cpu_id = readl(S5PC210_PRO_ID); + s5p_cpu_id = readl(EXYNOS4210_PRO_ID); s5p_cpu_id = (0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12));
/* - * 0xC200: S5PC210 EVT0 - * 0xC210: S5PC210 EVT1 + * 0xC200: EXYNOS4210 EVT0 + * 0xC210: EXYNOS4210 EVT1 */ if (s5p_cpu_id == 0xC200) { s5p_cpu_id |= 0x10; @@ -81,13 +81,13 @@ static inline int cpu_is_##type(void) \ return s5p_cpu_id == id ? 1 : 0; \ }
-IS_SAMSUNG_TYPE(s5pc210, 0xc210) +IS_SAMSUNG_TYPE(exynos4210, 0xc210)
#define SAMSUNG_BASE(device, base) \ static inline unsigned int samsung_get_base_##device(void) \ { \ - if (cpu_is_s5pc210()) \ - return S5PC210_##base; \ + if (cpu_is_exynos4210()) \ + return EXYNOS4210_##base; \ else \ return 0; \ } @@ -110,4 +110,4 @@ SAMSUNG_BASE(usb_otg, USBOTG_BASE) SAMSUNG_BASE(watchdog, WATCHDOG_BASE) #endif
-#endif /* _S5PC2XX_CPU_H */ +#endif /* _EXYNOS4_CPU_H */ diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-exynos4/gpio.h similarity index 83% rename from arch/arm/include/asm/arch-s5pc2xx/gpio.h rename to arch/arm/include/asm/arch-exynos4/gpio.h index 8be620c..a222cd7 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h +++ b/arch/arm/include/asm/arch-exynos4/gpio.h @@ -32,7 +32,7 @@ struct s5p_gpio_bank { unsigned char res1[8]; };
-struct s5pc210_gpio_part1 { +struct exynos4210_gpio_part1 { struct s5p_gpio_bank a0; struct s5p_gpio_bank a1; struct s5p_gpio_bank b; @@ -51,7 +51,7 @@ struct s5pc210_gpio_part1 { struct s5p_gpio_bank f3; };
-struct s5pc210_gpio_part2 { +struct exynos4210_gpio_part2 { struct s5p_gpio_bank j0; struct s5p_gpio_bank j1; struct s5p_gpio_bank k0; @@ -75,7 +75,7 @@ struct s5pc210_gpio_part2 { struct s5p_gpio_bank x3; };
-struct s5pc210_gpio_part3 { +struct exynos4210_gpio_part3 { struct s5p_gpio_bank z; };
@@ -92,27 +92,27 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); /* GPIO pins per bank */ #define GPIO_PER_BANK 8
-#define s5pc210_gpio_part1_get_nr(bank, pin) \ - ((((((unsigned int) &(((struct s5pc210_gpio_part1 *) \ - S5PC210_GPIO_PART1_BASE)->bank)) \ - - S5PC210_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ +#define exynos4210_gpio_part1_get_nr(bank, pin) \ + ((((((unsigned int) &(((struct exynos4210_gpio_part1 *) \ + EXYNOS4210_GPIO_PART1_BASE)->bank)) \ + - EXYNOS4210_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ * GPIO_PER_BANK) + pin)
-#define GPIO_PART1_MAX ((sizeof(struct s5pc210_gpio_part1) \ +#define GPIO_PART1_MAX ((sizeof(struct exynos4210_gpio_part1) \ / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-#define s5pc210_gpio_part2_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct s5pc210_gpio_part2 *) \ - S5PC210_GPIO_PART2_BASE)->bank)) \ - - S5PC210_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ +#define exynos4210_gpio_part2_get_nr(bank, pin) \ + (((((((unsigned int) &(((struct exynos4210_gpio_part2 *) \ + EXYNOS4210_GPIO_PART2_BASE)->bank)) \ + - EXYNOS4210_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ * GPIO_PER_BANK) + pin) + GPIO_PART1_MAX)
static inline unsigned int s5p_gpio_base(int nr) { if (nr < GPIO_PART1_MAX) - return S5PC210_GPIO_PART1_BASE; + return EXYNOS4210_GPIO_PART1_BASE; else - return S5PC210_GPIO_PART2_BASE; + return EXYNOS4210_GPIO_PART2_BASE;
return 0; } diff --git a/arch/arm/include/asm/arch-s5pc2xx/mmc.h b/arch/arm/include/asm/arch-exynos4/mmc.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/mmc.h rename to arch/arm/include/asm/arch-exynos4/mmc.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/pwm.h b/arch/arm/include/asm/arch-exynos4/pwm.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/pwm.h rename to arch/arm/include/asm/arch-exynos4/pwm.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/sromc.h b/arch/arm/include/asm/arch-exynos4/sromc.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/sromc.h rename to arch/arm/include/asm/arch-exynos4/sromc.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/sys_proto.h b/arch/arm/include/asm/arch-exynos4/sys_proto.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/sys_proto.h rename to arch/arm/include/asm/arch-exynos4/sys_proto.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/uart.h b/arch/arm/include/asm/arch-exynos4/uart.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/uart.h rename to arch/arm/include/asm/arch-exynos4/uart.h diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S index ddca1e2..a7fb934 100644 --- a/board/samsung/origen/lowlevel_init.S +++ b/board/samsung/origen/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * Lowlevel setup for ORIGEN board based on S5PV310 + * Lowlevel setup for ORIGEN board based on EXYNOS4210 * * Copyright (C) 2011 Samsung Electronics * @@ -43,11 +43,11 @@ lowlevel_init:
/* r5 has always zero */ mov r5, #0 - ldr r7, =S5PC210_GPIO_PART1_BASE - ldr r6, =S5PC210_GPIO_PART2_BASE + ldr r7, =EXYNOS4210_GPIO_PART1_BASE + ldr r6, =EXYNOS4210_GPIO_PART2_BASE
/* check reset status */ - ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET) + ldr r0, =(EXYNOS4210_POWER_BASE + INFORM1_OFFSET) ldr r1, [r0]
/* AFTR wakeup reset */ @@ -97,9 +97,9 @@ wakeup_reset:
exit_wakeup: /* Load return address and jump to kernel */ - ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET) + ldr r0, =(EXYNOS4210_POWER_BASE + INFORM0_OFFSET)
- /* r1 = physical address of s5pc210_cpu_resume function */ + /* r1 = physical address of exynos4210_cpu_resume function */ ldr r1, [r0]
/* Jump to kernel*/ @@ -113,7 +113,7 @@ exit_wakeup: */ system_clock_init: push {lr} - ldr r0, =S5PC210_CLOCK_BASE + ldr r0, =EXYNOS4210_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */ ldr r1, =CLK_SRC_CPU_VAL @@ -290,13 +290,13 @@ uart_asm_init:
/* setup UART0-UART3 GPIOs (part1) */ mov r0, r7 - ldr r1, =S5PC210_GPIO_A0_CON_VAL - str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET] - ldr r1, =S5PC210_GPIO_A1_CON_VAL - str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET] + ldr r1, =EXYNOS4210_GPIO_A0_CON_VAL + str r1, [r0, #EXYNOS4210_GPIO_A0_CON_OFFSET] + ldr r1, =EXYNOS4210_GPIO_A1_CON_VAL + str r1, [r0, #EXYNOS4210_GPIO_A1_CON_OFFSET]
- ldr r0, =S5PC210_UART_BASE - add r0, r0, #S5PC210_DEFAULT_UART_OFFSET + ldr r0, =EXYNOS4210_UART_BASE + add r0, r0, #EXYNOS4210_DEFAULT_UART_OFFSET
ldr r1, =ULCON_VAL str r1, [r0, #ULCON_OFFSET] diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S index a798848..6a41046 100644 --- a/board/samsung/origen/mem_setup.S +++ b/board/samsung/origen/mem_setup.S @@ -1,5 +1,5 @@ /* - * Memory setup for ORIGEN board based on S5PV310 + * Memory setup for ORIGEN board based on EXYNOS4210 * * Copyright (C) 2011 Samsung Electronics * @@ -38,7 +38,7 @@ mem_ctrl_asm_init: str r1, [r0]
#ifdef SET_MIU - ldr r0, =S5PC210_MIU_BASE + ldr r0, =EXYNOS4210_MIU_BASE /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */ ldr r1, =0x20001507 str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET] @@ -48,7 +48,7 @@ mem_ctrl_asm_init: str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET] #endif /* DREX0 */ - ldr r0, =S5PC210_DMC0_BASE + ldr r0, =EXYNOS4210_DMC0_BASE
/* * DLL Parameter Setting: @@ -229,7 +229,7 @@ mem_ctrl_asm_init: bne 8b
/* DREX1 */ - ldr r0, =S5PC210_DMC1_BASE @0x10410000 + ldr r0, =EXYNOS4210_DMC1_BASE @0x10410000
/* * DLL Parameter Setting: @@ -410,11 +410,11 @@ mem_ctrl_asm_init: bne 8b
/* turn on DREX0, DREX1 */ - ldr r0, =S5PC210_DMC0_BASE + ldr r0, =EXYNOS4210_DMC0_BASE ldr r1, =0x0FFF303a str r1, [r0, #DMC_CONCONTROL]
- ldr r0, =S5PC210_DMC1_BASE + ldr r0, =EXYNOS4210_DMC1_BASE ldr r1, =0x0FFF303a str r1, [r0, #DMC_CONCONTROL]
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c index 8882646..14cbb9b 100644 --- a/board/samsung/origen/origen.c +++ b/board/samsung/origen/origen.c @@ -27,13 +27,13 @@ #include <asm/arch/mmc.h>
DECLARE_GLOBAL_DATA_PTR; -struct s5pc210_gpio_part1 *gpio1; -struct s5pc210_gpio_part2 *gpio2; +struct exynos4210_gpio_part1 *gpio1; +struct exynos4210_gpio_part2 *gpio2;
int board_init(void) { - gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE; - gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE; + gpio1 = (struct exynos4210_gpio_part1 *) EXYNOS4210_GPIO_PART1_BASE; + gpio2 = (struct exynos4210_gpio_part2 *) EXYNOS4210_GPIO_PART2_BASE;
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); return 0; diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h index 63d85d8..fa9146f 100644 --- a/board/samsung/origen/origen_setup.h +++ b/board/samsung/origen/origen_setup.h @@ -98,8 +98,8 @@ #define INFORM1_OFFSET 0x804
/* GPIO Offsets for UART: GPIO Contol Register */ -#define S5PC210_GPIO_A0_CON_OFFSET 0x00 -#define S5PC210_GPIO_A1_CON_OFFSET 0x20 +#define EXYNOS4210_GPIO_A0_CON_OFFSET 0x00 +#define EXYNOS4210_GPIO_A1_CON_OFFSET 0x20
/* UART Register offsets */ #define ULCON_OFFSET 0x00 @@ -416,8 +416,8 @@ * UART GPIO_A0/GPIO_A1 Control Register Value * 0x2: UART Function */ -#define S5PC210_GPIO_A0_CON_VAL 0x22222222 -#define S5PC210_GPIO_A1_CON_VAL 0x222222 +#define EXYNOS4210_GPIO_A0_CON_VAL 0x22222222 +#define EXYNOS4210_GPIO_A1_CON_VAL 0x222222
/* ULCON: UART Line Control Value 8N1 */ #define WORD_LEN_5_BIT 0x00 diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S index 58b737b..10f1b89 100644 --- a/board/samsung/smdkv310/lowlevel_init.S +++ b/board/samsung/smdkv310/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * Lowlevel setup for SMDKV310 board based on S5PC210 + * Lowlevel setup for SMDKV310 board based on EXYNOS4210 * * Copyright (C) 2011 Samsung Electronics * @@ -45,11 +45,11 @@ lowlevel_init:
/* r5 has always zero */ mov r5, #0 - ldr r7, =S5PC210_GPIO_PART1_BASE - ldr r6, =S5PC210_GPIO_PART2_BASE + ldr r7, =EXYNOS4210_GPIO_PART1_BASE + ldr r6, =EXYNOS4210_GPIO_PART2_BASE
/* check reset status */ - ldr r0, =(S5PC210_POWER_BASE + 0x81C) @ INFORM7 + ldr r0, =(EXYNOS4210_POWER_BASE + 0x81C) @ INFORM7 ldr r1, [r0]
/* AFTR wakeup reset */ @@ -95,9 +95,9 @@ wakeup_reset:
exit_wakeup: /* Load return address and jump to kernel */ - ldr r0, =(S5PC210_POWER_BASE + 0x800) @ INFORM0 + ldr r0, =(EXYNOS4210_POWER_BASE + 0x800) @ INFORM0
- /* r1 = physical address of s5pc210_cpu_resume function */ + /* r1 = physical address of exynos4210_cpu_resume function */ ldr r1, [r0]
/* Jump to kernel*/ @@ -111,7 +111,7 @@ exit_wakeup: */ system_clock_init: push {lr} - ldr r0, =S5PC210_CLOCK_BASE + ldr r0, =EXYNOS4210_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */ ldr r1, =0x0101 @@ -388,12 +388,12 @@ uart_asm_init: /* setup UART0-UART3 GPIOs (part1) */ mov r0, r7 ldr r1, =0x22222222 - str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET + str r1, [r0, #0x00] @ EXYNOS4210_GPIO_A0_OFFSET ldr r1, =0x00222222 - str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET + str r1, [r0, #0x20] @ EXYNOS4210_GPIO_A1_OFFSET
- ldr r0, =S5PC210_UART_BASE - add r0, r0, #S5PC210_DEFAULT_UART_OFFSET + ldr r0, =EXYNOS4210_UART_BASE + add r0, r0, #EXYNOS4210_DEFAULT_UART_OFFSET
ldr r1, =0x3C5 str r1, [r0, #0x4] diff --git a/board/samsung/smdkv310/mem_setup.S b/board/samsung/smdkv310/mem_setup.S index 73aebe3..df62f5f 100644 --- a/board/samsung/smdkv310/mem_setup.S +++ b/board/samsung/smdkv310/mem_setup.S @@ -1,5 +1,5 @@ /* - * Memory setup for SMDKV310 board based on S5PC210 + * Memory setup for SMDKV310 board based on EXYNOS4210 * * Copyright (C) 2011 Samsung Electronics * @@ -54,7 +54,7 @@ mem_ctrl_asm_init: str r1, [r0]
#ifdef SET_MIU - ldr r0, =S5PC210_MIU_BASE @0x10600000 + ldr r0, =EXYNOS4210_MIU_BASE @0x10600000 #ifdef CONFIG_MIU_1BIT_INTERLEAVED ldr r1, =0x0000000c str r1, [r0, #0x400] @MIU_INTLV_CONFIG @@ -89,7 +89,7 @@ mem_ctrl_asm_init: #endif #endif /* DREX0 */ - ldr r0, =S5PC210_DMC0_BASE @0x10400000 + ldr r0, =EXYNOS4210_DMC0_BASE @0x10400000
ldr r1, =0xe0000086 str r1, [r0, #0x1C] @DMC_PHYCONTROL1 @@ -221,7 +221,7 @@ mem_ctrl_asm_init: bne 8b
/* DREX1 */ - ldr r0, =S5PC210_DMC1_BASE @0x10410000 + ldr r0, =EXYNOS4210_DMC1_BASE @0x10410000
ldr r1, =0xe0000086 str r1, [r0, #0x1C] @DMC_PHYCONTROL1 diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c index d9caca7..44cd549 100644 --- a/board/samsung/smdkv310/smdkv310.c +++ b/board/samsung/smdkv310/smdkv310.c @@ -29,8 +29,8 @@ #include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR; -struct s5pc210_gpio_part1 *gpio1; -struct s5pc210_gpio_part2 *gpio2; +struct exynos4210_gpio_part1 *gpio1; +struct exynos4210_gpio_part2 *gpio2;
static void smc9115_pre_init(void) { @@ -52,8 +52,8 @@ static void smc9115_pre_init(void)
int board_init(void) { - gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE; - gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE; + gpio1 = (struct exynos4210_gpio_part1 *) EXYNOS4210_GPIO_PART1_BASE; + gpio2 = (struct exynos4210_gpio_part2 *) EXYNOS4210_GPIO_PART2_BASE;
smc9115_pre_init();
diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S index 67635bb..76bbba5 100644 --- a/board/samsung/universal_c210/lowlevel_init.S +++ b/board/samsung/universal_c210/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * Lowlevel setup for universal board based on S5PC210 + * Lowlevel setup for universal board based on EXYNOS4210 * * Copyright (C) 2010 Samsung Electronics * Kyungmin Park kyungmin.park@samsung.com @@ -43,11 +43,11 @@ lowlevel_init: /* r5 has always zero */ mov r5, #0
- ldr r7, =S5PC210_GPIO_PART1_BASE - ldr r6, =S5PC210_GPIO_PART2_BASE + ldr r7, =EXYNOS4210_GPIO_PART1_BASE + ldr r6, =EXYNOS4210_GPIO_PART2_BASE
/* System Timer */ - ldr r0, =S5PC210_SYSTIMER_BASE + ldr r0, =EXYNOS4210_SYSTIMER_BASE ldr r1, =0x5000 str r1, [r0, #0x0] ldr r1, =0xffffffff @@ -57,7 +57,7 @@ lowlevel_init:
/* PMIC manual reset */ /* nPOWER: XEINT_23: GPX2[7] */ - add r0, r6, #0xC40 @ S5PC210_GPIO_X2_OFFSET + add r0, r6, #0xC40 @ EXYNOS4210_GPIO_X2_OFFSET ldr r1, [r0, #0x0] bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit orr r1, r1, #(0x1 << 28) @ Output @@ -71,7 +71,7 @@ lowlevel_init: bl system_clock_init
/* Disable Watchdog */ - ldr r0, =S5PC210_WATCHDOG_BASE @0x10060000 + ldr r0, =EXYNOS4210_WATCHDOG_BASE @0x10060000 str r5, [r0]
/* UART */ @@ -99,12 +99,12 @@ uart_asm_init: */ mov r0, r7 ldr r1, =0x22222222 - str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET + str r1, [r0, #0x00] @ EXYNOS4210_GPIO_A0_OFFSET ldr r1, =0x00223322 - str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET + str r1, [r0, #0x20] @ EXYNOS4210_GPIO_A1_OFFSET
- /* UART_SEL GPY4[7] (part2) at S5PC210 */ - add r0, r6, #0x1A0 @ S5PC210_GPIO_Y4_OFFSET + /* UART_SEL GPY4[7] (part2) at EXYNOS4210 */ + add r0, r6, #0x1A0 @ EXYNOS4210_GPIO_Y4_OFFSET ldr r1, [r0, #0x0] bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit orr r1, r1, #(0x1 << 28) @@ -125,7 +125,7 @@ uart_asm_init: nop
system_clock_init: - ldr r0, =S5PC210_CLOCK_BASE + ldr r0, =EXYNOS4210_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */ ldr r1, =0x0101 @@ -326,7 +326,7 @@ system_clock_init: nop
system_power_init: - ldr r0, =S5PC210_POWER_BASE @ 0x10020000 + ldr r0, =EXYNOS4210_POWER_BASE @ 0x10020000
ldr r2, =0x330C @ PS_HOLD_CONTROL ldr r1, [r0, r2] diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index d767eaa..0542a16 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -31,8 +31,8 @@
DECLARE_GLOBAL_DATA_PTR;
-struct s5pc210_gpio_part1 *gpio1; -struct s5pc210_gpio_part2 *gpio2; +struct exynos4210_gpio_part1 *gpio1; +struct exynos4210_gpio_part2 *gpio2; unsigned int board_rev;
u32 get_board_rev(void) @@ -49,8 +49,8 @@ static void check_hw_revision(void);
int board_init(void) { - gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE; - gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE; + gpio1 = (struct exynos4210_gpio_part1 *) EXYNOS4210_GPIO_PART1_BASE; + gpio2 = (struct exynos4210_gpio_part2 *) EXYNOS4210_GPIO_PART2_BASE;
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; diff --git a/boards.cfg b/boards.cfg index 8b7a03b..c7d5377 100644 --- a/boards.cfg +++ b/boards.cfg @@ -195,9 +195,9 @@ omap4_panda arm armv7 panda ti omap4_sdp4430 arm armv7 sdp4430 ti omap4 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx -origen arm armv7 origen samsung s5pc2xx -s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx -smdkv310 arm armv7 smdkv310 samsung s5pc2xx +origen arm armv7 origen samsung exynos4 +s5pc210_universal arm armv7 universal_c210 samsung exynos4 +smdkv310 arm armv7 smdkv310 samsung exynos4 harmony arm armv7 harmony nvidia tegra2 seaboard arm armv7 seaboard nvidia tegra2 u8500_href arm armv7 u8500 st-ericsson u8500 diff --git a/include/configs/origen.h b/include/configs/origen.h index 380ef4f..6099e87 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -1,7 +1,7 @@ /* * Copyright (C) 2011 Samsung Electronics * - * Configuration settings for the SAMSUNG ORIGEN (S5PV310) board. + * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board. * * See file CREDITS for list of people who contributed to this * project. @@ -28,7 +28,7 @@ /* High Level Configuration Options */ #define CONFIG_SAMSUNG 1 /* SAMSUNG core */ #define CONFIG_S5P 1 /* S5P Family */ -#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */ +#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ #define CONFIG_ORIGEN 1 /* working with ORIGEN*/
#include <asm/arch/cpu.h> /* get chip and board defs */ @@ -68,7 +68,7 @@ #define CONFIG_SERIAL_MULTI 1 #define CONFIG_SERIAL2 1 /* use SERIAL 2 */ #define CONFIG_BAUDRATE 115200 -#define S5PC210_DEFAULT_UART_OFFSET 0x020000 +#define EXYNOS4210_DEFAULT_UART_OFFSET 0x020000
/* SD/MMC configuration */ #define CONFIG_GENERIC_MMC 1 diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index cc14f97..0e390bd 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -2,7 +2,7 @@ * Copyright (C) 2010 Samsung Electronics * Minkyu Kang mk7.kang@samsung.com * - * Configuation settings for the SAMSUNG Universal (s5pc100) board. + * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board. * * See file CREDITS for list of people who contributed to this * project. @@ -32,7 +32,7 @@ */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ #define CONFIG_S5P 1 /* which is in a S5P Family */ -#define CONFIG_S5PC210 1 /* which is in a S5PC210 */ +#define CONFIG_EXYNOS4210 1 /* which is in a EXYNOS4210 */ #define CONFIG_UNIVERSAL 1 /* working with Universal */
#include <asm/arch/cpu.h> /* get chip and board defs */ @@ -47,7 +47,7 @@ #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define CONFIG_SYS_TEXT_BASE 0x44800000
-/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */ +/* input clock of PLL: Universal has 24MHz input clock at EXYNOS4210 */ #define CONFIG_SYS_CLK_FREQ_C210 24000000
#define CONFIG_SETUP_MEMORY_TAGS @@ -249,8 +249,8 @@ /* * I2C Settings */ -#define CONFIG_SOFT_I2C_GPIO_SCL s5pc210_gpio_part1_get_nr(b, 7) -#define CONFIG_SOFT_I2C_GPIO_SDA s5pc210_gpio_part1_get_nr(b, 6) +#define CONFIG_SOFT_I2C_GPIO_SCL exynos4210_gpio_part1_get_nr(b, 7) +#define CONFIG_SOFT_I2C_GPIO_SDA exynos4210_gpio_part1_get_nr(b, 6)
#define CONFIG_SOFT_I2C #define CONFIG_SOFT_I2C_READ_REPEATED_START diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index fc8bb06..f81e4d7 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -1,7 +1,7 @@ /* * Copyright (C) 2011 Samsung Electronics * - * Configuration settings for the SAMSUNG SMDKV310 (S5PC210) board. + * Configuration settings for the SAMSUNG SMDKV310 (EXYNOS4210) board. * * See file CREDITS for list of people who contributed to this * project. @@ -28,7 +28,7 @@ /* High Level Configuration Options */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ #define CONFIG_S5P 1 /* S5P Family */ -#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */ +#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ #define CONFIG_SMDKV310 1 /* working with SMDKV310*/
#include <asm/arch/cpu.h> /* get chip and board defs */ @@ -65,7 +65,7 @@ #define CONFIG_SERIAL_MULTI 1 #define CONFIG_SERIAL1 1 /* use SERIAL 1 */ #define CONFIG_BAUDRATE 115200 -#define S5PC210_DEFAULT_UART_OFFSET 0x010000 +#define EXYNOS4210_DEFAULT_UART_OFFSET 0x010000
/* SD/MMC configuration */ #define CONFIG_GENERIC_MMC 1