On 11 Oct 2010, at 23:08, Matt Waddel matt.waddel@canonical.com wrote:
Hi Jamie,
On 10/11/2010 03:03 PM, Jamie Bennett wrote:
On Mon, Oct 11, 2010 at 01:13:40PM +0100, Harry Liebel wrote:
I've had mixed results. When the box completes the boot the basic systems seem to work ok (I can get an IP and poke the filesystem). It still takes several minutes to get to a prompt as mentioned on the wiki page.
It happens quite often that the box does not get to a prompt at all. It fails to read the MMC properly. Below is two separate cases where reading the partition table fails. In the first case it finds one partition and in the second case it fails to find any partitions. The boot monitor has no problem reading uboot, kernel or initrd from the MMC when writing to internal FLASH.
I've also tried a different SD card with similar results. Sometimes it works fine and other times it reports I/O errors. I've tried the daily builds for 6, 8 and 10 October. Is this a known issue?
I can't fix your problem but for extra brownie points you could register this in launchpad as a bug and we can push for the right people to investigate.
Please file a bug at:
http://bugs.launchpad.net/linux-linaro
(sounds like a kernel related issue) and we will take it from there :)
We've already opened a bug on this issue:
https://bugs.launchpad.net/ubuntu/+source/linux-linaro/+bug/632798
Great, thanks.
--Matt
Regards, Jamie.
mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new SD card at address 8fe4 mmcblk0: mmc0:8fe4 SD02G 1.84 GiB mmcblk0: Freeing init memory: 160K p1ding, please wait... p2 udev[497]: starting version 163 port 1 high speed Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. usb 1-1: new high speed USB device using isp1760 and address 2 port 1 high speed usb 1-1: New USB device found, idVendor=0471, idProduct=3526 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: ISP1520 usb 1-1: Manufacturer: Philips Semiconductors mmcblk0: retrying using single block read mmcblk0: error -5 transferring data, sector 0, nr 8, card status 0xb00 hub 1-1:1.0: USB hub found hub 1-1:1.0: 3 ports detected end_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on device mmcblk0, logical block 0
mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new SD card at address 8fe4 mmcblk0: mmc0:8fe4 SD02G 1.84 GiB mmcblk0: TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 port 1 high speed VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0 Registering SWP/SWPB emulation handler rtc-pl031 mb:rtc: setting system clock to 2010-10-11 10:49:28 UTC (1286794168) usb 1-1: new high speed USB device using isp1760 and address 2 Freeing init memory: 160K port 1 high speed mmcblk0: retrying using single block read Loading, please wait... usb 1-1: New USB device found, idVendor=0471, idProduct=3526 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 udev[493]: starting version 163 Begin: Loading eusb 1-1: Product: ISP1520 mmcblk0: error -5 transferring data, sector 2, nr 6, card status 0x900 end_request: I/O error, dev mmcblk0, sector 2 ssential driversusb 1-1: Manufacturer: Philips Semiconductors ... done. Begin: Runnimmcblk0: error -5 transferring data, sector 3, nr 5, card status 0x900 ng /scripts/initend_request: I/O error, dev mmcblk0, sector 3 -premount ... done. Begin: Mounting root file system ... hub 1-1:1.0: USB hub found hub 1-1:1.0: 3 ports detected Begin: Running /scripts/local-tommcblk0: error -5 transferring data, sector 5, nr 3, card status 0xb00 p ... done. end_request: I/O error, dev mmcblk0, sector 5 unable to read partition table
Thanks, Harry
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev