Greetings,
I see a similar problem with my snowball, and I was under impression is that something is wrong with microSD interface (eMMC works ok) on this particular board (SDK-00840 V11, 905-00024-B11, 100-00103-B13). Moreover, to my knowledge QA has no problems with SD when testing the recent release images.
But after reading this email thread, I tried booting my snowball board using the 12.05 release image [1], and the 13.05 release image [2] - just in case. The [1] booted ok, on the snowball I've downloaded the [1] from releases.l.o to the rootfs on the SD and checked it with 'bzip2 -t' - no errors. With [2] written to the same microSD card I got numerous errors, most with "error -84" (different from what Daniel reported):
[ 4.654144] mmci-pl18x sdi0: error during DMA transfer! [ 4.659515] mmcblk0: response CRC error sending r/w cmd command, card status 0x800b00 done. [ 5.305755] mmcblk0: error -84 sending stop command, original cmd response 0x900, card status 0x900 [ 5.316741] mmcblk0: error -84 sending stop command, original cmd response 0x900, card status 0x900 [ 5.328430] mmci-pl18x sdi0: error during DMA transfer! [ 5.334106] mmcblk0: error -84 sending status command, retrying [ 5.340087] mmcblk0: error -84 sending status command, retrying [ 5.346099] mmcblk0: error -84 transferring data, sector 107296, nr 216, cmd response 0x900, card status 0xb00
Just FYI.
Thanks, Andrey
[1] https://releases.linaro.org/12.05/ubuntu/leb-snowball/lt-snowball-x11-base-p... [2] https://releases.linaro.org/13.05/ubuntu/snowball/snowball-raring_developer_...
On 06/07/2013 12:30 PM, Daniel Lezcano wrote:
On 06/07/2013 09:34 AM, Linus Walleij wrote:
On Thu, Jun 6, 2013 at 6:15 PM, Daniel Lezcano daniel.lezcano@linaro.org wrote:
I tried to boot my ux500
Is this an HREF (black plastic box) or the Snowball board?
It is the snowball board.
with the 3.10-rc4 kernel but it hangs at boot time with the following messages:
Hm, looks like some very real corruption, Ulf what do you say?
Linus