Hi, All
I want to use the panda-linaro build from here: https://android-build.linaro.org/builds/~linaro-android-member-ti/panda-lina...
but with the sdcard create by linaro-android-media-create, I can't boot the panda board. Anyone has met the same problem?
attached linaro-android-media-create.log is the output of the linaro-android-media-create
Following is the output of minicom:
Welcome to minicom 2.5
OPTIONS: I18n Compiled on May 2 2011, 10:05:24. Port /dev/ttyUSB0
Press CTRL-A Z for help on special keys
U-Boot SPL 2013.01.-rc1 (Mar 12 2013 - 01:42:53)
OMAP4460 ES1.1
OMAP SD/MMC: 0 ** Partition 1 not valid on device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###
U-Boot SPL 2013.01.-rc1 (Mar 12 2013 - 01:42:53) OMAP4460 ES1.1 OMAP SD/MMC: 0 ** Partition 1 not valid on device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###
U-Boot SPL 2013.01.-rc1 (Mar 12 2013 - 01:42:53) OMAP4460 ES1.1 OMAP SD/MMC: 0 ** Partition 1 not valid on device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###
U-Boot SPL 2013.01.-rc1 (Mar 12 2013 - 01:42:53) OMAP4460 ES1.1 OMAP SD/MMC: 0 ** Partition 1 not valid on device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###