3 Apr
2011
3 Apr
'11
2:45 p.m.
I'm trying to get this data from the Smarttop to show the SPDIF device but I get the same "No PulseAudio daemon running, or not running as session daemon." as Shawn.. under exactly the same operating system as Jason..
Is there a special place I need to be running this, in a certain shell? All I can figure is some environment variable is being stripped when I enter a shell..
Pulseaudio is definitely running.. (outputting over HDMI via a Yamaha 5.1 receiver, the boot sound is loud, and pulse is handling audio mixing..)
Jason, what was the trick? :D
--
Matt Sealey matt@genesi-usa.com
Product Development Analyst, Genesi USA, Inc.
On Sat, Apr 2, 2011 at 4:31 AM, Jason Hui jason.hui@linaro.org wrote:
> Hi, Kurt,
>
> On Fri, Apr 1, 2011 at 11:20 PM, Kurt Taylor kurt.taylor@linaro.org wrote:
>> Hi everyone,
>>
>> I am trying to assemble a reference for the sound device specifics for all
>> the platforms. The catch is that I don't have all the dev platforms
>> available to me.
>>
>> Here is where you can help! I have Panda and Beagle C4. I need everything
>> else. If you have access to other platform(s), please do the following and
>> email the output to me.
>>
>> With a Linaro image or Ubuntu image (an image with with pulseaudio
>> installed), run the following: "pacmd list-sinks" and email it to me. You
>> will get an output that resembles this:
>>
>
> Here is what I get:
>
> jason@jason-laptop:~$ dmesg | grep Machine
> [ 0.000000] Machine: Genesi Efika MX (Smartbook)
>
> jason@jason-laptop:~$ cat /etc/issue
> Ubuntu 10.10 \n \l
>
> jason@jason-laptop:~$ pacmd list-sinks
> Welcome to PulseAudio! Use "help" for usage information.
>>>> 1 sink(s) available.
> * index: 0
> name: <alsa_output.platform-soc-audio.2.analog-stereo>
> driver: <module-alsa-card.c>
> flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
> state: SUSPENDED
> suspend cause: IDLE
> priority: 9009
> volume: 0: 82% 1: 82%
> 0: -5.17 dB 1: -5.17 dB
> balance 0.00
> base volume: 100%
> 0.00 dB
> volume steps: 65537
> muted: no
> current latency: 0.00 ms
> max request: 0 KiB
> max rewind: 0 KiB
> monitor source: 0
> sample spec: s16le 2ch 44100Hz
> channel map: front-left,front-right
> Stereo
> used by: 0
> linked by: 0
> configured latency: 0.00 ms; range is 0.50 .. 139.32 ms
> card: 0 <alsa_card.platform-soc-audio.2>
> module: 4
> properties:
> alsa.resolution_bits = "16"
> device.api = "alsa"
> device.class = "sound"
> alsa.class = "generic"
> alsa.subclass = "generic-mix"
> alsa.name = ""
> alsa.id = "SGTL5000 SGTL5000-0"
> alsa.subdevice = "0"
> alsa.subdevice_name = "subdevice #0"
> alsa.device = "0"
> alsa.card = "0"
> alsa.card_name = "imx-3stack"
> alsa.long_card_name = "imx-3stack (SGTL5000)"
> device.bus_path = "platform-soc-audio.2"
> sysfs.path = "/devices/platform/soc-audio.2/sound/card0"
> device.string = "hw:0"
> device.buffering.buffer_size = "24576"
> device.buffering.fragment_size = "6144"
> device.access_mode = "mmap+timer"
> device.profile.name = "analog-stereo"
> device.profile.description = "Analog Stereo"
> device.description = "imx-3stack Analog Stereo"
> module-udev-detect.discovered = "1"
> device.icon_name = "audio-card"
> ports:
> analog-output: Analog Output (priority 9900)
> analog-output-headphones: Analog Headphones (priority 9000)
> active port: <analog-output>
>
>>
>> Thanks in advance!
>>
>> Kurt Taylor (irc krtaylor)
>>
>>
>> _______________________________________________
>> linaro-dev mailing list
>> linaro-dev@lists.linaro.org
>> http://lists.linaro.org/mailman/listinfo/linaro-dev
>>
>>
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
>