--- grant, uboot patches has been send to u-boot maillist Test OK on mx53 loco board
Signed-off-by: Jason Liu jason.hui@linaro.org --- arch/arm/boot/dts/mx53-loco.dts | 30 ++++++++++++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_loco.c | 5 +++++ 3 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/mx53-loco.dts b/arch/arm/boot/dts/mx53-loco.dts new file mode 100644 index 0000000..7347456 --- /dev/null +++ b/arch/arm/boot/dts/mx53-loco.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +/ { + model = "Freescale i.MX53 LOCO"; + compatible = "fsl,mx53-loco"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + }; + + memory { + device_type = "memory"; + reg = <0x70000000 0x40000000>; + }; + + chosen { + }; +}; diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index aae51ee..a61e01e 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -167,6 +167,7 @@ config MACH_MX53_SMD config MACH_MX53_LOCO bool "Support MX53 LOCO platforms" select SOC_IMX53 + select MX5_DT_COMMON select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 0a18f8d..6ffc591 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -226,10 +226,15 @@ static struct sys_timer mx53_loco_timer = { .init = mx53_loco_timer_init, };
+static const char *mx53_loco_dt_match[] __initdata = { + "fsl,mx53-loco", + NULL +}; MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, .timer = &mx53_loco_timer, .init_machine = mx53_loco_board_init, + .dt_compat = mx53_loco_dt_match, MACHINE_END