Break out code without functional changes. This simplifies the code and makes way for handle two parallel request.
Signed-off-by: Per Forlin per.forlin@linaro.org Acked-by: Kyungmin Park kyungmin.park@samsung.com Acked-by: Arnd Bergmann arnd@arndb.de Reviewed-by: Venkatraman S svenkatr@ti.com Tested-by: Sourav Poddarsourav.poddar@ti.com Tested-by: Linus Walleij linus.walleij@linaro.org --- drivers/mmc/card/block.c | 220 +++++++++++++++++++++++++++------------------- 1 files changed, 131 insertions(+), 89 deletions(-)
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index a0a76f4..7ed2c68 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -106,6 +106,16 @@ struct mmc_blk_data {
static DEFINE_MUTEX(open_lock);
+enum mmc_blk_status { + MMC_BLK_SUCCESS = 0, + MMC_BLK_PARTIAL, + MMC_BLK_RETRY, + MMC_BLK_RETRY_SINGLE, + MMC_BLK_DATA_ERR, + MMC_BLK_CMD_ERR, + MMC_BLK_ABORT, +}; + module_param(perdev_minors, int, 0444); MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device");
@@ -812,6 +822,95 @@ static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq, R1_CC_ERROR | /* Card controller error */ \ R1_ERROR) /* General/unknown error */
+int mmc_blk_err_check(struct mmc_blk_request *brq, + struct request *req, + struct mmc_card *card, + struct mmc_blk_data *md) +{ + int ret = MMC_BLK_SUCCESS; + + /* + * sbc.error indicates a problem with the set block count + * command. No data will have been transferred. + * + * cmd.error indicates a problem with the r/w command. No + * data will have been transferred. + * + * stop.error indicates a problem with the stop command. Data + * may have been transferred, or may still be transferring. + */ + if (brq->sbc.error || brq->cmd.error || brq->stop.error) { + switch (mmc_blk_cmd_recovery(card, req, brq)) { + case ERR_RETRY: + return MMC_BLK_RETRY; + case ERR_ABORT: + return MMC_BLK_ABORT; + case ERR_CONTINUE: + break; + } + } + + /* + * Check for errors relating to the execution of the + * initial command - such as address errors. No data + * has been transferred. + */ + if (brq->cmd.resp[0] & CMD_ERRORS) { + pr_err("%s: r/w command failed, status = %#x\n", + req->rq_disk->disk_name, brq->cmd.resp[0]); + return MMC_BLK_ABORT; + } + + /* + * Everything else is either success, or a data error of some + * kind. If it was a write, we may have transitioned to + * program mode, which we have to wait for it to complete. + */ + if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { + u32 status; + do { + int err = get_card_status(card, &status, 5); + if (err) { + printk(KERN_ERR "%s: error %d requesting status\n", + req->rq_disk->disk_name, err); + return MMC_BLK_CMD_ERR; + } + /* + * Some cards mishandle the status bits, + * so make sure to check both the busy + * indication and the card state. + */ + } while (!(status & R1_READY_FOR_DATA) || + (R1_CURRENT_STATE(status) == R1_STATE_PRG)); + } + + if (brq->data.error) { + pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n", + req->rq_disk->disk_name, brq->data.error, + (unsigned)blk_rq_pos(req), + (unsigned)blk_rq_sectors(req), + brq->cmd.resp[0], brq->stop.resp[0]); + + if (rq_data_dir(req) == READ) { + if (brq->data.blocks > 1) { + /* Redo read one sector at a time */ + pr_warning("%s: retrying using single block read\n", + req->rq_disk->disk_name); + return MMC_BLK_RETRY_SINGLE; + } + return MMC_BLK_DATA_ERR; + } else { + return MMC_BLK_CMD_ERR; + } + } + + if (ret == MMC_BLK_SUCCESS && + blk_rq_bytes(req) != brq->data.bytes_xfered) + ret = MMC_BLK_PARTIAL; + + return ret; +} + static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_card *card, int disable_multi, @@ -948,6 +1047,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) struct mmc_card *card = md->queue.card; struct mmc_blk_request *brq = &mq->mqrq_cur->brq; int ret = 1, disable_multi = 0, retry = 0; + enum mmc_blk_status status;
do { mmc_blk_rw_rq_prep(mq->mqrq_cur, card, disable_multi, mq); @@ -955,99 +1055,41 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
mmc_queue_bounce_post(mq->mqrq_cur);
- /* - * sbc.error indicates a problem with the set block count - * command. No data will have been transferred. - * - * cmd.error indicates a problem with the r/w command. No - * data will have been transferred. - * - * stop.error indicates a problem with the stop command. Data - * may have been transferred, or may still be transferring. - */ - if (brq->sbc.error || brq->cmd.error || brq->stop.error) { - switch (mmc_blk_cmd_recovery(card, req, brq)) { - case ERR_RETRY: - if (retry++ < 5) - continue; - case ERR_ABORT: - goto cmd_abort; - case ERR_CONTINUE: + status = mmc_blk_err_check(brq, req, card, md); + switch (status) { + case MMC_BLK_SUCCESS: + case MMC_BLK_PARTIAL: + /* + * A block was successfully transferred. + */ + spin_lock_irq(&md->lock); + ret = __blk_end_request(req, 0, + brq->data.bytes_xfered); + spin_unlock_irq(&md->lock); + break; + case MMC_BLK_CMD_ERR: + goto cmd_err; + case MMC_BLK_RETRY_SINGLE: + disable_multi = 1; + break; + case MMC_BLK_RETRY: + if (retry++ < 5) break; - } - } - - /* - * Check for errors relating to the execution of the - * initial command - such as address errors. No data - * has been transferred. - */ - if (brq->cmd.resp[0] & CMD_ERRORS) { - pr_err("%s: r/w command failed, status = %#x\n", - req->rq_disk->disk_name, brq->cmd.resp[0]); + case MMC_BLK_ABORT: goto cmd_abort; + case MMC_BLK_DATA_ERR: + /* + * After an error, we redo I/O one sector at a + * time, so we only reach here after trying to + * read a single sector. + */ + spin_lock_irq(&md->lock); + ret = __blk_end_request(req, -EIO, + brq->data.blksz); + spin_unlock_irq(&md->lock); + break; }
- /* - * Everything else is either success, or a data error of some - * kind. If it was a write, we may have transitioned to - * program mode, which we have to wait for it to complete. - */ - if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { - u32 status; - do { - int err = get_card_status(card, &status, 5); - if (err) { - printk(KERN_ERR "%s: error %d requesting status\n", - req->rq_disk->disk_name, err); - goto cmd_err; - } - /* - * Some cards mishandle the status bits, - * so make sure to check both the busy - * indication and the card state. - */ - } while (!(status & R1_READY_FOR_DATA) || - (R1_CURRENT_STATE(status) == R1_STATE_PRG)); - } - - if (brq->data.error) { - pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n", - req->rq_disk->disk_name, brq->data.error, - (unsigned)blk_rq_pos(req), - (unsigned)blk_rq_sectors(req), - brq->cmd.resp[0], brq->stop.resp[0]); - - if (rq_data_dir(req) == READ) { - if (brq->data.blocks > 1) { - /* Redo read one sector at a time */ - pr_warning("%s: retrying using single block read\n", - req->rq_disk->disk_name); - disable_multi = 1; - continue; - } - - /* - * After an error, we redo I/O one sector at a - * time, so we only reach here after trying to - * read a single sector. - */ - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, -EIO, - brq->data.blksz); - spin_unlock_irq(&md->lock); - continue; - } else { - goto cmd_err; - } - } - - /* - * A block was successfully transferred. - */ - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, brq->data.bytes_xfered); - spin_unlock_irq(&md->lock); } while (ret);
return 1;