From: "Ying-Chun Liu (PaulLiu)" paul.liu@linaro.org
This adds an RTC driver for the Low Power (LP) section of SNVS. It hooks into the /dev/rtc interface and supports ioctl to complete RTC features. This driver supports device tree bindings. It only uses the RTC hw in non-secure mode.
Signed-off-by: Anish Trivedi anish@freescale.com Signed-off-by: Eric Miao eric.miao@linaro.org Signed-off-by: Anson Huang b20788@freescale.com Signed-off-by: Ying-Chun Liu (PaulLiu) paul.liu@linaro.org Cc: Alessandro Zummo a.zummo@towertech.it Cc: Shawn Guo shawn.guo@linaro.org --- drivers/rtc/Kconfig | 11 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-snvs.c | 737 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 749 insertions(+), 0 deletions(-) create mode 100644 drivers/rtc/rtc-snvs.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 3a125b8..d58f4b7 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -634,6 +634,17 @@ config RTC_MXC This driver can also be built as a module, if so, the module will be called "rtc-mxc".
+config RTC_DRV_SNVS + tristate "Freescale SNVS Real Time Clock" + depends on ARCH_MXC + depends on RTC_CLASS + help + If you say yes here you get support for the Freescale SNVS + Low Power (LP) RTC module. + + This driver can also be built as a module, if so, the module + will be called "rtc-snvs". + config RTC_DRV_BQ4802 tristate "TI BQ4802" help diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 6e69823..8b30686 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -93,6 +93,7 @@ obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o +obj-$(CONFIG_RTC_DRV_SNVS) += rtc-snvs.o obj-$(CONFIG_RTC_DRV_SPEAR) += rtc-spear.o obj-$(CONFIG_RTC_DRV_STARFIRE) += rtc-starfire.o obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c new file mode 100644 index 0000000..49ac8a5 --- /dev/null +++ b/drivers/rtc/rtc-snvs.c @@ -0,0 +1,737 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +/* + * Implementation based on rtc-ds1553.c + */ + +/*! + * @defgroup RTC Real Time Clock (RTC) Driver + */ +/*! + * @file rtc-snvs.c + * @brief Secure Real Time Clock (SRTC) interface in Freescale's SNVS module + * + * This file contains Real Time Clock interface for Linux. The Freescale + * SNVS module's Low Power (LP) SRTC functionality is utilized in this driver, + * in non-secure mode. + * + * @ingroup RTC + */ + +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/rtc.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/sched.h> +#include <linux/of.h> +#include <linux/of_device.h> + +/* Register definitions */ +#define SNVS_HPSR 0x14 /* HP Status Register */ +#define SNVS_LPCR 0x38 /* LP Control Register */ +#define SNVS_LPSR 0x4C /* LP Status Register */ +#define SNVS_LPSRTCMR 0x50 /* LP Secure Real Time Counter MSB Register */ +#define SNVS_LPSRTCLR 0x54 /* LP Secure Real Time Counter LSB Register */ +#define SNVS_LPTAR 0x58 /* LP Time Alarm Register */ +#define SNVS_LPSMCMR 0x5C /* LP Secure Monotonic Counter MSB Register */ +#define SNVS_LPSMCLR 0x60 /* LP Secure Monotonic Counter LSB Register */ +#define SNVS_LPPGDR 0x64 /* LP Power Glitch Detector Register */ +#define SNVS_LPGPR 0x68 /* LP General Purpose Register */ + +/* Bit Definitions */ +#define SNVS_HPSR_SSM_ST_MASK 0x00000F00 +#define SNVS_HPSR_SSM_ST_SHIFT 8 + +#define SNVS_LPCR_SRTC_ENV (1 << 0) +#define SNVS_LPCR_LPTA_EN (1 << 1) +#define SNVS_LPCR_LPWUI_EN (1 << 3) +#define SNVS_LPCR_ALL_INT_EN (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN) +#define SNVS_LPSR_LPTA (1 << 0) +#define SNVS_LPPGDR_INIT 0x41736166 + +/* Other defines */ +#define SSM_ST_CHECK 0x9 +#define SSM_ST_NON_SECURE 0xB +#define CNTR_TO_SECS_SH 15 /* Converts 47-bit counter to 32-bit seconds */ + +#define RTC_READ_TIME_47BIT _IOR('p', 0x20, unsigned long long) +/* blocks until LPSCMR is set, returns difference */ +#define RTC_WAIT_TIME_SET _IOR('p', 0x21, int64_t) + +struct rtc_drv_data { + struct rtc_device *rtc; + void __iomem *ioaddr; + int irq; + bool irq_enable; +}; + +static unsigned long rtc_status; + +static DEFINE_SPINLOCK(rtc_lock); +DECLARE_COMPLETION(snvs_completion); +static int64_t time_diff; + +/*! + * LP counter register reads should always use this function. + * This function reads 2 consective times from LP counter register + * until the 2 values match. This is to avoid reading corrupt + * value if the counter is in the middle of updating + */ +static inline u32 rtc_read_lp_counter(void __iomem *counter_reg) +{ + u64 read1, read2; + u32 counter_sec; + + do { + /* MSB */ + read1 = readl(counter_reg); + read1 <<= 32; + /* LSB */ + read1 |= readl(counter_reg + 4); + + /* MSB */ + read2 = readl(counter_reg); + read2 <<= 32; + /* LSB */ + read2 |= readl(counter_reg + 4); + } while (read1 != read2); + + /* Convert 47-bit counter to 32-bit raw second count */ + counter_sec = (u32) (read1 >> CNTR_TO_SECS_SH); + + return counter_sec; +} + +/*! + * This function does write synchronization for writes to the lp srtc block. + * To take care of the asynchronous CKIL clock, all writes from the IP domain + * will be synchronized to the CKIL domain. + */ +static inline void rtc_write_sync_lp(void __iomem *ioaddr) +{ + unsigned int i, count1, count2, count3; + + /* Wait for 3 CKIL cycles */ + for (i = 0; i < 3; i++) { + + /* Do consective reads of LSB of counter to ensure integrity */ + do { + count1 = readl(ioaddr + SNVS_LPSRTCLR); + count2 = readl(ioaddr + SNVS_LPSRTCLR); + } while (count1 != count2); + + /* Now wait until counter value changes */ + do { + do { + count2 = readl(ioaddr + SNVS_LPSRTCLR); + count3 = readl(ioaddr + SNVS_LPSRTCLR); + } while (count2 != count3); + } while (count3 == count1); + } +} + +/*! + * This function updates the RTC alarm registers and then clears all the + * interrupt status bits. + * + * @param alrm the new alarm value to be updated in the RTC + * + * @return 0 if successful; non-zero otherwise. + */ +static int rtc_update_alarm(struct device *dev, struct rtc_time *alrm) +{ + struct rtc_drv_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + struct rtc_time alarm_tm, now_tm; + unsigned long now, time, lp_cr; + int ret; + + now = rtc_read_lp_counter(ioaddr + SNVS_LPSRTCMR); + rtc_time_to_tm(now, &now_tm); + + alarm_tm.tm_year = now_tm.tm_year; + alarm_tm.tm_mon = now_tm.tm_mon; + alarm_tm.tm_mday = now_tm.tm_mday; + + alarm_tm.tm_hour = alrm->tm_hour; + alarm_tm.tm_min = alrm->tm_min; + alarm_tm.tm_sec = alrm->tm_sec; + + rtc_tm_to_time(&now_tm, &now); + rtc_tm_to_time(&alarm_tm, &time); + + if (time < now) { + time += 60 * 60 * 24; + rtc_time_to_tm(time, &alarm_tm); + } + ret = rtc_tm_to_time(&alarm_tm, &time); + + /* Have to clear LPTA_EN before programming new alarm time in LPTAR */ + lp_cr = readl(ioaddr + SNVS_LPCR); + writel(lp_cr & ~SNVS_LPCR_LPTA_EN, ioaddr + SNVS_LPCR); + rtc_write_sync_lp(ioaddr); + + writel(time, ioaddr + SNVS_LPTAR); + + /* clear alarm interrupt status bit */ + writel(SNVS_LPSR_LPTA, ioaddr + SNVS_LPSR); + + return ret; +} + +/*! + * This function is the RTC interrupt service routine. + * + * @param irq RTC IRQ number + * @param dev_id device ID which is not used + * + * @return IRQ_HANDLED as defined in the include/linux/interrupt.h file. + */ +static irqreturn_t snvs_rtc_interrupt(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct rtc_drv_data *pdata = platform_get_drvdata(pdev); + void __iomem *ioaddr = pdata->ioaddr; + u32 lp_status, lp_cr; + u32 events = 0; + + lp_status = readl(ioaddr + SNVS_LPSR); + lp_cr = readl(ioaddr + SNVS_LPCR); + + /* update irq data & counter */ + if (lp_status & SNVS_LPSR_LPTA) { + if (lp_cr & SNVS_LPCR_LPTA_EN) + events |= (RTC_AF | RTC_IRQF); + + /* disable further lp alarm interrupts */ + lp_cr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN); + } + + /* Update interrupt enables */ + writel(lp_cr, ioaddr + SNVS_LPCR); + + /* If no interrupts are enabled, turn off interrupts in kernel */ + if (((lp_cr & SNVS_LPCR_ALL_INT_EN) == 0) && (pdata->irq_enable)) { + disable_irq_nosync(pdata->irq); + pdata->irq_enable = false; + } + + /* clear interrupt status */ + writel(lp_status, ioaddr + SNVS_LPSR); + + rtc_write_sync_lp(ioaddr); + rtc_update_irq(pdata->rtc, 1, events); + + return IRQ_HANDLED; +} + +/*! + * This function is used to open the RTC driver. + * + * @return 0 if successful; non-zero otherwise. + */ +static int snvs_rtc_open(struct device *dev) +{ + if (test_and_set_bit(1, &rtc_status)) + return -EBUSY; + + return 0; +} + +/*! + * clear all interrupts and release the IRQ + */ +static void snvs_rtc_release(struct device *dev) +{ + rtc_status = 0; +} + +/*! + * This function reads the current RTC time into tm in Gregorian date. + * + * @param tm contains the RTC time value upon return + * + * @return 0 if successful; non-zero otherwise. + */ +static int snvs_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct rtc_drv_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + + rtc_time_to_tm(rtc_read_lp_counter(ioaddr + SNVS_LPSRTCMR), tm); + + return 0; +} + +/*! + * This function sets the internal RTC time based on tm in Gregorian date. + * + * @param tm the time value to be set in the RTC + * + * @return 0 if successful; non-zero otherwise. + */ +static int snvs_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct rtc_drv_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + unsigned long time; + int ret; + u32 lp_cr; + u64 old_time_47bit, new_time_47bit; + + ret = rtc_tm_to_time(tm, &time); + if (ret != 0) + return ret; + + old_time_47bit = (((u64) (readl(ioaddr + SNVS_LPSRTCMR) & + ((0x1 << CNTR_TO_SECS_SH) - 1)) << 32) | + ((u64) readl(ioaddr + SNVS_LPSRTCLR))); + + /* Disable RTC first */ + lp_cr = readl(ioaddr + SNVS_LPCR) & ~SNVS_LPCR_SRTC_ENV; + writel(lp_cr, ioaddr + SNVS_LPCR); + while (readl(ioaddr + SNVS_LPCR) & SNVS_LPCR_SRTC_ENV) + ; + + /* Write 32-bit time to 47-bit timer, leaving 15 LSBs blank */ + writel(time << CNTR_TO_SECS_SH, ioaddr + SNVS_LPSRTCLR); + writel(time >> (32 - CNTR_TO_SECS_SH), ioaddr + SNVS_LPSRTCMR); + + /* Enable RTC again */ + writel(lp_cr | SNVS_LPCR_SRTC_ENV, ioaddr + SNVS_LPCR); + while (!(readl(ioaddr + SNVS_LPCR) & SNVS_LPCR_SRTC_ENV)) + ; + + rtc_write_sync_lp(ioaddr); + + new_time_47bit = (((u64) (readl(ioaddr + SNVS_LPSRTCMR) & + ((0x1 << CNTR_TO_SECS_SH) - 1)) << 32) | + ((u64) readl(ioaddr + SNVS_LPSRTCLR))); + + time_diff = new_time_47bit - old_time_47bit; + + /* signal all waiting threads that time changed */ + complete_all(&snvs_completion); + + /* allow signalled threads to handle the time change notification */ + schedule(); + + /* reinitialize completion variable */ + INIT_COMPLETION(snvs_completion); + + return 0; +} + +/*! + * This function reads the current alarm value into the passed in \b alrm + * argument. It updates the \b alrm's pending field value based on the whether + * an alarm interrupt occurs or not. + * + * @param alrm contains the RTC alarm value upon return + * + * @return 0 if successful; non-zero otherwise. + */ +static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct rtc_drv_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + + rtc_time_to_tm(readl(ioaddr + SNVS_LPTAR), &alrm->time); + alrm->pending = + ((readl(ioaddr + SNVS_LPSR) & SNVS_LPSR_LPTA) != 0) ? 1 : 0; + + return 0; +} + +/*! + * This function sets the RTC alarm based on passed in alrm. + * + * @param alrm the alarm value to be set in the RTC + * + * @return 0 if successful; non-zero otherwise. + */ +static int snvs_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct rtc_drv_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + unsigned long lock_flags = 0; + u32 lp_cr; + int ret; + + if (rtc_valid_tm(&alrm->time)) { + if (alrm->time.tm_sec > 59 || + alrm->time.tm_hour > 23 || alrm->time.tm_min > 59) { + return -EINVAL; + } + } + + spin_lock_irqsave(&rtc_lock, lock_flags); + + ret = rtc_update_alarm(dev, &alrm->time); + if (ret) + goto out; + + lp_cr = readl(ioaddr + SNVS_LPCR); + + if (alrm->enabled) + lp_cr |= (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN); + else + lp_cr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN); + + if (lp_cr & SNVS_LPCR_ALL_INT_EN) { + if (!pdata->irq_enable) { + enable_irq(pdata->irq); + pdata->irq_enable = true; + } + } else { + if (pdata->irq_enable) { + disable_irq(pdata->irq); + pdata->irq_enable = false; + } + } + + writel(lp_cr, ioaddr + SNVS_LPCR); + +out: + rtc_write_sync_lp(ioaddr); + spin_unlock_irqrestore(&rtc_lock, lock_flags); + + return ret; +} + +/*! + * This function is used to provide the content for the /proc/driver/rtc + * file. + * + * @param seq buffer to hold the information that the driver wants to write + * + * @return The number of bytes written into the rtc file. + */ +static int snvs_rtc_proc(struct device *dev, struct seq_file *seq) +{ + struct rtc_drv_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + + seq_printf(seq, "alarm_IRQ\t: %s\n", + (((readl(ioaddr + SNVS_LPCR)) & SNVS_LPCR_LPTA_EN) != + 0) ? "yes" : "no"); + + return 0; +} + +static int snvs_rtc_alarm_irq_enable(struct device *dev, unsigned int enable) +{ + struct rtc_drv_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + u32 lp_cr; + unsigned long lock_flags = 0; + + spin_lock_irqsave(&rtc_lock, lock_flags); + + if (enable) { + if (!pdata->irq_enable) { + enable_irq(pdata->irq); + pdata->irq_enable = true; + } + lp_cr = readl(ioaddr + SNVS_LPCR); + lp_cr |= (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN); + writel(lp_cr, ioaddr + SNVS_LPCR); + } else { + lp_cr = readl(ioaddr + SNVS_LPCR); + lp_cr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN); + if (((lp_cr & SNVS_LPCR_ALL_INT_EN) == 0) + && (pdata->irq_enable)) { + disable_irq(pdata->irq); + pdata->irq_enable = false; + } + writel(lp_cr, ioaddr + SNVS_LPCR); + } + + rtc_write_sync_lp(ioaddr); + spin_unlock_irqrestore(&rtc_lock, lock_flags); + + return 0; +} + +/*! + * This function is used to support some ioctl calls directly. + * Other ioctl calls are supported indirectly through the + * arm/common/rtctime.c file. + * + * @param cmd ioctl command as defined in include/linux/rtc.h + * @param arg value for the ioctl command + * + * @return 0 if successful or negative value otherwise. + */ +static int snvs_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + struct rtc_drv_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + u64 time_47bit; + int retVal; + + switch (cmd) { + case RTC_READ_TIME_47BIT: + time_47bit = (((u64) (readl(ioaddr + SNVS_LPSRTCMR) & + ((0x1 << CNTR_TO_SECS_SH) - 1)) << 32) | + ((u64) readl(ioaddr + SNVS_LPSRTCLR))); + + if (arg && copy_to_user((u64 *) arg, &time_47bit, sizeof(u64))) + return -EFAULT; + + return 0; + + /* This IOCTL to be used by processes to be notified of time changes */ + case RTC_WAIT_TIME_SET: + /* don't block without releasing mutex first */ + mutex_unlock(&pdata->rtc->ops_lock); + + /* sleep till awakened by SRTC driver when LPSCMR is changed */ + wait_for_completion(&snvs_completion); + + /* relock mutex because rtc_dev_ioctl will unlock again */ + retVal = mutex_lock_interruptible(&pdata->rtc->ops_lock); + + /* copy the new time difference = new time - previous time + * to the user param. The difference is a signed value */ + if (arg && copy_to_user((int64_t *) arg, &time_diff, + sizeof(int64_t))) + return -EFAULT; + + return retVal; + + } + + return -ENOIOCTLCMD; +} + +/*! + * The RTC driver structure + */ +static struct rtc_class_ops snvs_rtc_ops = { + .open = snvs_rtc_open, + .release = snvs_rtc_release, + .read_time = snvs_rtc_read_time, + .set_time = snvs_rtc_set_time, + .read_alarm = snvs_rtc_read_alarm, + .set_alarm = snvs_rtc_set_alarm, + .proc = snvs_rtc_proc, + .ioctl = snvs_rtc_ioctl, + .alarm_irq_enable = snvs_rtc_alarm_irq_enable, +}; + +/*! SNVS RTC Power management control */ +static int __devinit snvs_rtc_probe(struct platform_device *pdev) +{ + struct timespec tv; + struct resource *res; + struct rtc_device *rtc; + struct rtc_drv_data *pdata = NULL; + void __iomem *ioaddr; + u32 lp_cr; + int ret = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + ioaddr = ioremap(res->start, resource_size(res)); + if (!ioaddr) + return -EADDRNOTAVAIL; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->ioaddr = ioaddr; + + /* Configure and enable the RTC */ + pdata->irq = platform_get_irq(pdev, 0); + if (pdata->irq >= 0) { + if (request_irq(pdata->irq, snvs_rtc_interrupt, IRQF_SHARED, + pdev->name, pdev) < 0) { + dev_warn(&pdev->dev, "interrupt not available.\n"); + pdata->irq = -1; + } else { + disable_irq(pdata->irq); + pdata->irq_enable = false; + } + } + + /* initialize glitch detect */ + writel(SNVS_LPPGDR_INIT, ioaddr + SNVS_LPPGDR); + udelay(100); + + /* clear lp interrupt status */ + writel(0xFFFFFFFF, ioaddr + SNVS_LPSR); + + /* Enable RTC */ + lp_cr = readl(ioaddr + SNVS_LPCR); + if ((lp_cr & SNVS_LPCR_SRTC_ENV) == 0) + writel(lp_cr | SNVS_LPCR_SRTC_ENV, ioaddr + SNVS_LPCR); + + udelay(100); + + writel(0xFFFFFFFF, ioaddr + SNVS_LPSR); + udelay(100); + + platform_set_drvdata(pdev, pdata); + + rtc = rtc_device_register(pdev->name, &pdev->dev, + &snvs_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + ret = PTR_ERR(rtc); + goto err_out; + } + + pdata->rtc = rtc; + + tv.tv_nsec = 0; + tv.tv_sec = rtc_read_lp_counter(ioaddr + SNVS_LPSRTCMR); + + /* By default, devices should wakeup if they can */ + /* So snvs is set as "should wakeup" as it can */ + device_init_wakeup(&pdev->dev, 1); + + return ret; + +err_out: + iounmap(ioaddr); + if (pdata->irq >= 0) + free_irq(pdata->irq, pdev); + + return ret; +} + +static int __devexit snvs_rtc_remove(struct platform_device *pdev) +{ + struct rtc_drv_data *pdata = platform_get_drvdata(pdev); + rtc_device_unregister(pdata->rtc); + if (pdata->irq >= 0) + free_irq(pdata->irq, pdev); + iounmap(pdata->ioaddr); + + return 0; +} + +/*! + * This function is called to save the system time delta relative to + * the SNVS RTC when enterring a low power state. This time delta is + * then used on resume to adjust the system time to account for time + * loss while suspended. + * + * @param pdev not used + * @param state Power state to enter. + * + * @return The function always returns 0. + */ +static int snvs_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct rtc_drv_data *pdata = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev)) { + enable_irq_wake(pdata->irq); + } else { + if (pdata->irq_enable) + disable_irq(pdata->irq); + } + + return 0; +} + +/*! + * This function is called to correct the system time based on the + * current SNVS RTC time relative to the time delta saved during + * suspend. + * + * @param pdev not used + * + * @return The function always returns 0. + */ +static int snvs_rtc_resume(struct platform_device *pdev) +{ + struct rtc_drv_data *pdata = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev)) { + disable_irq_wake(pdata->irq); + } else { + if (pdata->irq_enable) + enable_irq(pdata->irq); + } + + return 0; +} + +static const struct of_device_id __devinitdata snvs_dt_ids[] = { + { .compatible = "fsl,snvs" }, + { /* sentinel */ } +}; + +/*! + * Contains pointers to the power management callback functions. + */ +static struct platform_driver snvs_rtc_driver = { + .driver = { + .name = "snvs_rtc", + .owner = THIS_MODULE, + .of_match_table = snvs_dt_ids, + }, + .probe = snvs_rtc_probe, + .remove = __exit_p(snvs_rtc_remove), + .suspend = snvs_rtc_suspend, + .resume = snvs_rtc_resume, +}; + +/*! + * This function creates the /proc/driver/rtc file and registers the device RTC + * in the /dev/misc directory. It also reads the RTC value from external source + * and setup the internal RTC properly. + * + * @return -1 if RTC is failed to initialize; 0 is successful. + */ +static int __init snvs_rtc_init(void) +{ + return platform_driver_register(&snvs_rtc_driver); +} +module_init(snvs_rtc_init); + +/*! + * This function removes the /proc/driver/rtc file and un-registers the + * device RTC from the /dev/misc directory. + */ +static void __exit snvs_rtc_exit(void) +{ + platform_driver_unregister(&snvs_rtc_driver); +} +module_exit(snvs_rtc_exit); + +MODULE_AUTHOR("Anish Trivedi anish@freescale.com, " + "Eric Miao eric.miao@linaro.org, " + "Anson Huang b20788@freescale.com, " + "Ying-Chun Liu (PaulLiu) paul.liu@linaro.org"); +MODULE_DESCRIPTION("SNVS Realtime Clock Driver (RTC)"); +MODULE_LICENSE("GPL v2");