Hi Linus,
I tried to boot my ux500 with the 3.10-rc4 kernel but it hangs at boot time with the following messages:
mmcblk0: error -110 transferring data, sector 2891778, nr 6, cmd response 0x900, card status 0x0 mmci-pl18x sdi4: error during DMA transfer! mmcblk0: error -110 transferring data, sector 2891779, nr 5, cmd response 0x900, card status 0x0 mmci-pl18x sdi4: error during DMA transfer! mmcblk0: error -110 transferring data, sector 2891780, nr 4, cmd response 0x900, card status 0x0 mmci-pl18x sdi4: error during DMA transfer! mmcblk0: error -110 transferring data, sector 2891781, nr 3, cmd response 0x900, card status 0x0 mmci-pl18x sdi4: error during DMA transfer! mmcblk0: error -110 transferring data, sector 2891782, nr 2, cmd response 0x900, card status 0x0 mmci-pl18x sdi4: error during DMA transfer! mmcblk0: error -110 transferring data, sector 2891783, nr 1, cmd response 0x900, card status 0x0 Buffer I/O error on device mmcblk0, logical block 361472 mmcblk0: p1 p2 p3 p4 < p5 p6 > mmc0: Card stuck in programming state! __mmc_switch blk_update_request: 6 callbacks suppressed end_request: I/O error, dev mmcblk0boot1, sector 0 Buffer I/O error on device mmcblk0boot1, logical block 0 end_request: I/O error, dev mmcblk0boot1, sector 0 Buffer I/O error on device mmcblk0boot1, logical block 0 end_request: I/O error, dev mmcblk0boot1, sector 0 Buffer I/O error on device mmcblk0boot1, logical block 0 mmcblk0boot1: unable to read partition table end_request: I/O error, dev mmcblk0boot0, sector 0 Buffer I/O error on device mmcblk0boot0, logical block 0 end_request: I/O error, dev mmcblk0boot0, sector 0 Buffer I/O error on device mmcblk0boot0, logical block 0 end_request: I/O error, dev mmcblk0boot0, sector 0 Buffer I/O error on device mmcblk0boot0, logical block 0 mmcblk0boot0: unable to read partition table Waiting for root device /dev/mmcblk1p2...
I thought my sd-card was dead and tried another one but I got the same problem.
Is it a known problem ?
Thanks in advance
-- Daniel