On 13/12/11 16:09, Paul Larson wrote:
Possibly a kernel bug? Lee, anything on snowball that would cause it to not go through with the reboot when on usb power?
Last I saw, Dave was chatting with the guys at Igloo about it and a DSP issue was fingered. Check back with him to see if his investigations have been furthered since.
Kind regards, Lee
On Tue, Dec 13, 2011 at 9:50 AM, Dave Pigott <dave.pigott@linaro.org mailto:dave.pigott@linaro.org> wrote:
Hi all, Sorry for the wide distribution, but I've got a rather curious problem. I'm trying to get a Snowball V11 PDK working in the validation lab, and the only way to get it to boot on power-on is to power it over USB and control the power through a USB power adaptor. While this works admirably, the problem is that when I try to soft-reboot I get the usual: Broadcast message from root@master (/dev/ttyAMA2) at 15:48 ... The system is going down for reboot NOW! * Asking all remaining processes to terminate... [ OK ] * All processes ended within 1 seconds.... [ OK ] * Deconfiguring network interfaces... [ OK ] * Deactivating swap... [ OK ] umount: /run/lock: not mounted * Will now restart [ 1279.346801] Restarting system. and then nothing. It just hangs and never comes back until I power cycle it. BTW: Sometimes I get the whole of the "Restarting system" message, sometimes just half of it. Has anybody any idea why this might be the case and, if so, what I can do about it? Thanks Dave Dave Pigott Validation Engineer T: +44 1223 45 00 24 <tel:%2B44%201223%2045%2000%2024> | M +44 7940 45 93 44 <tel:%2B44%207940%2045%2093%2044> Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM SoCs____ Follow *Linaro: *Facebook <http://www.facebook.com/pages/Linaro> | Twitter <http://twitter.com/#%21/linaroorg> | Blog <http://www.linaro.org/linaro-blog/> _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org <mailto:linaro-dev@lists.linaro.org> http://lists.linaro.org/mailman/listinfo/linaro-dev