Re: [Maverick][PATCH] UBUNTU : SAUCE - ARM: Support for vbus, overcurrent and LEDs on IGEPv2

Hi Mathieu,

Since this is for Maverick, this needs the appropriate SRU justification written up in the bug report. It's also a good rule of thumb to post the SRU justification to the body of the email as well. Also, has this patch been submitted upstream? If so, it would be good to add a reference to the upstream submission in the commit message for tracking purposes.

Thanks, Leann

On Fri, 2010-10-01 at 15:50 -0600, Mathieu Poirier wrote:

...

From 210c9482650eb6cb24488303e50e3c49babb3d3a Mon Sep 17 00:00:00 2001

From: Enric Balletbo i Serra eballetbo@gmail.com Date: Fri, 1 Oct 2010 15:23:31 -0600 Subject: [PATCH] Support for vbus, overcurrent and LEDs on IGEPv2

This patch adds support for the VBUS and over current GPIOs along with the four LEDs present on the IGEPv2 board.

Initialisation of the LEDs is done with the LED class if CONFIG_LEDS_GPIO is selected or the General Purpose Input/Output (GPIO) interface if CONFIG_LEDS_GPIO is not selected.

https://bugs.launchpad.net/bugs/651589

Signed-off-by: eballetbo@gmail.com Signed-off-by: mathieu.poirier@canonical.com

---

arch/arm/mach-omap2/board-igep0020.c | 170 ++++++++++++++++++++-------------- 1 files changed, 101 insertions(+), 69 deletions(-)

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index d55c57b..21bb77f 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -261,6 +261,77 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#include <linux/leds.h>

+static struct gpio_led igep2_gpio_leds[] = {

• [0] = {

• .name = "gpio-led:red:d0",
  

• .gpio = IGEP2_GPIO_LED0_RED,
  

• .default_trigger = "default-off"
  

• },
• [1] = {

• .name = "gpio-led:green:d0",
  

• .gpio = IGEP2_GPIO_LED0_GREEN,
  

• .default_trigger = "default-off",
  

• },
• [2] = {

• .name = "gpio-led:red:d1",
  

• .gpio = IGEP2_GPIO_LED1_RED,
  

• .default_trigger = "default-off",
  

• },
• [3] = {

• .name = "gpio-led:green:d1",
  

• .default_trigger = "heartbeat",
  

• .gpio = -EINVAL, /* gets replaced */
  

• },

+};

+static struct gpio_led_platform_data igep2_led_pdata = {

• .leds = igep2_gpio_leds,
• .num_leds = ARRAY_SIZE(igep2_gpio_leds),

+};

+static struct platform_device igep2_led_device = {

• .name   = "leds-gpio",
  

• .id     = -1,
  

• .dev    = {
  

•  .platform_data  =  &igep2_led_pdata,
  

• },

+};

+static void __init igep2_leds_init(void) +{

• platform_device_register(&igep2_led_device);

+}

+#else +static inline void igep2_leds_init(void) +{

• if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&

•    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
  

• gpio_export(IGEP2_GPIO_LED0_RED, 0);
  

• gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
  

• } else

• pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
  

• if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&

•    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
  

• gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
  

• gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
  

• } else

• pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
  

• if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&

•    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
  

• gpio_export(IGEP2_GPIO_LED1_RED, 0);
  

• gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
  

• } else

• pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
  

+} +#endif

static int igep2_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -274,14 +345,40 @@ static int igep2_twl_gpio_setup(struct device *dev, igep2_vmmc1_supply.dev = mmc[0].dev; igep2_vmmc2_supply.dev = mmc[1].dev;

• /*

• * REVISIT: need ehci-omap hooks for external VBUS
  

• * power switch and overcurrent detect
  

• */
  

• gpio_request(gpio + 1, "GPIO_EHCI_NOC");
• gpio_direction_input(gpio + 1);
• /*

• * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN
  

• * (out, active low)
  

• */
  

• gpio_request(gpio + TWL4030_GPIO_MAX, 0);
• gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
• /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */

+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)

• if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)

•    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
  

• gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
  

• gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
  

• } else

• pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
  

+#else

• igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;

+#endif

• return 0;

}; -static struct twl4030_gpio_platform_data igep2_gpio_data = { +static struct twl4030_gpio_platform_data igep2_twl4030_gpio_pdata = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END,

• .use_leds = false,

• .use_leds = true, .setup = igep2_twl_gpio_setup,

}; @@ -355,47 +452,6 @@ static void __init igep2_display_init(void) pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); } -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h>

-static struct gpio_led igep2_gpio_leds[] = {

• {

• .name = "led0:red",
  

• .gpio = IGEP2_GPIO_LED0_RED,
  

• },
• {

• .name = "led0:green",
  

• .default_trigger = "heartbeat",
  

• .gpio = IGEP2_GPIO_LED0_GREEN,
  

• },
• {

• .name = "led1:red",
  

• .gpio = IGEP2_GPIO_LED1_RED,
  

• },

-};

-static struct gpio_led_platform_data igep2_led_pdata = {

• .leds = igep2_gpio_leds,
• .num_leds = ARRAY_SIZE(igep2_gpio_leds),

-};

-static struct platform_device igep2_led_device = {

• .name   = "leds-gpio",
  

• .id     = -1,
  

• .dev    = {
  

•  .platform_data  =  &igep2_led_pdata,
  

• },

-};

-static void __init igep2_init_led(void) -{

• platform_device_register(&igep2_led_device);

-}

-#else -static inline void igep2_init_led(void) {} -#endif

static struct platform_device *igep2_devices[] __initdata = { &igep2_dss_device, }; @@ -425,7 +481,7 @@ static struct twl4030_platform_data igep2_twldata = { /* platform_data for children goes here */ .usb = &igep2_usb_data, .codec = &igep2_codec_data,

• .gpio = &igep2_gpio_data,

• .gpio = &igep2_twl4030_gpio_pdata, .vmmc1 = &igep2_vmmc1, .vmmc2 = &igep2_vmmc2, .vpll2 = &igep2_vpll2,

@@ -486,34 +542,10 @@ static void __init igep2_init(void) usb_ehci_init(&ehci_pdata); igep2_flash_init();

• igep2_init_led();

• igep2_leds_init(); igep2_display_init(); igep2_init_smsc911x();

• /* GPIO userspace leds */

-#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)

• if ((gpio_request(IGEP2_GPIO_LED0_RED, "led0:red") == 0) &&

•    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
  

• gpio_export(IGEP2_GPIO_LED0_RED, 0);
  

• gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
  

• } else

• pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
  

• if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "led0:green") == 0) &&

•    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
  

• gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
  

• gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
  

• } else

• pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
  

• if ((gpio_request(IGEP2_GPIO_LED1_RED, "led1:red") == 0) &&

•    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
  

• gpio_export(IGEP2_GPIO_LED1_RED, 0);
  

• gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
  

• } else

• pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
  

-#endif

• /* GPIO W-LAN + Bluetooth combo module */ if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {

-- 1.7.0.4