Hi Ken,
FWIW I'm running fairly recent linaro images on my pandaboard with success.
hwpack in my case was from 0119.
Your boot log looks pretty much like mine does, warnings and all.
Regards, Tom
On Mon, Jan 31, 2011 at 10:31 AM, Ken Werner ken@linux.vnet.ibm.com wrote:
Hi there,
When booting linaro snapshots on my PandaBoard the system hangs a few seconds after the bash prompt is shown (sometimes a little earlier). My first step was to enable magic-sysrq but the system doesn't react on them. It looks like it's already powered off - very strange. I've tried various hwpacks and headless images and also an SD-card image that works works on a pandaboard of a colleague (20110127 hwpack with 20110126 headless) but everything fails with the same symptoms. I used two different power supplies and several SD cards - also no difference. The board itself doesn't seem to be defective as the ubuntu-netbook-10.10-preinstalled-netbook-armel+omap4.img runs flawlessly for hours. I replaced the 2.6.35 omap4 kernel of the ubuntu 10.10 image with a kernel built from the latest git://git.linaro.org/ubuntu/linux-linaro- natty.git - but then the board hangs again. Attached is the output of the serial console. Any hints/suggestions on how to get the linaro kernel working on this board are much appreciated.
Regards Ken
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev