On Sat, Feb 12, 2011 at 06:17:03PM +0530, Thomas Abraham wrote:
The uart ports are used as console and due to console_init, the uart ports are initialized prior to the uart driver's probe function is called. During this intialization stage, the driver obtains the default port register values from the platform data.
This patch adds support for obtaining the default port register values from the device tree. The default values should be specified in the 'chosen' node of the device tree.
Signed-off-by: Thomas Abraham thomas.abraham@linaro.org
drivers/tty/serial/samsung.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 2335eda..66fece9 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -43,6 +43,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/cpufreq.h> +#include <linux/of.h> #include <asm/irq.h> @@ -1384,11 +1385,24 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; struct platform_device **platdev_ptr; int i;
- unsigned int *condefs , len;
- struct s3c2410_uartcfg *cfg;
dbg("s3c24xx_serial_init_ports: initialising ports...\n"); platdev_ptr = s3c24xx_uart_devs;
- condefs = (u32 *)of_get_property(of_chosen, "console-defaults", &len);
of_get_property returns (const void *) for a reason. Make condefs a 'const u32 *' instead of overriding the compiler warning.
Pulling the uart configuration out of a console-defaults property in the chosen node is not the way to do this. Each uart device should have its own node in the device tree, and the per-port configuration belongs there.
g.
- if (condefs && (len / sizeof(unsigned int)) == 3) {
for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) {cfg = s3c24xx_dev_to_cfg(&(*platdev_ptr)->dev);cfg->ucon = be32_to_cpu(condefs[0]);cfg->ulcon = be32_to_cpu(condefs[1]);cfg->ufcon = be32_to_cpu(condefs[2]);platdev_ptr++;}- }
- platdev_ptr = s3c24xx_uart_devs; for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); }
-- 1.6.6.rc2