On my Panda board, the focused build boots up (shell reached and ps shows system processes running) but does not show anything on a DVI monitor (screen remains blank)
The enablement build fails to boot up, kernel saying "DEADLOCK"
---- [ 9.146179] ---- lock([ 9.147369] lock(psPVRSRVMutexpsPVRSRVMutex); );
lock([ 9.149963] lock(psPVRSRVMutexpsPVRSRVMutex); );
*** DEADLOCK ***
[ 9.159881] [ 9.159881] *** DEADLOCK *** [ 9.159881] May be due to missing lock nesting notation On Mon, Jul 18, 2011 at 7:08 PM, Zach Pfeffer zach.pfeffer@linaro.orgwrote:
Fellow PandaBoard enthusiasts, take our latest 3.0 kernel based, Linaro GCC 4.5 upstream and enablement preview builds for a ride...
Upstream Focused Build:
After plugging in an SD card (listed here as /dev/sdc) run the following commands:
wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_panda-11.07-rele... wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_panda-11.07-rele... wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_panda-11.07-rele... bzr branch lp:linaro-image-tools ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev panda --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2
Insert the SD card into your PandaBoard, a monitor into the DVI port and you'll be up and running in 640x480p@60Hz with software emulated 3-D.
Build page at:
https://android-build.linaro.org/builds/~linaro-android/panda-11.07-release/...
Enablement Build:
After plugging in an SD card (list here as /dev/sdc) run the following commands:
wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_leb-panda-11.07-... wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_leb-panda-11.07-... wget --no-check-certificate
https://android-build.linaro.org/jenkins/job/linaro-android_leb-panda-11.07-... bzr branch lp:linaro-image-tools ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev panda --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2
Insert the SD card into your PandaBoard, a monitor into the HDMI port and you'll be up and running in 1920x1080p60Hz with full 3-D acceleration!
Build page at
https://android-build.linaro.org/builds/~linaro-android/leb-panda-11.07-rele...
Try one... or both! This is a preview, but I couldn't wait to share it. These can also be built from source. Take a look at:
https://wiki.linaro.org/Platform/Android/GetSource https://wiki.linaro.org/Platform/Android/BuildSource
As always send inquirys to linaro-dev@lists.linaro.org or me, zach.pfeffer@linaro.org. We'd also love contributions and will be setting up Gerrit soon to help facilitate Android collaboration.
Enjoy!
-Zach