From: "Ying-Chun Liu (PaulLiu)" paul.liu@linaro.org
Anatop regulator driver is used by i.MX6 SoC. The regulator provides controlling the voltage of PU, CORE, SOC, and some devices. This patch adds the Anatop regulator driver.
Signed-off-by: Nancy Chen Nancy.Chen@freescale.com Signed-off-by: Ying-Chun Liu (PaulLiu) paul.liu@linaro.org Cc: Mark Brown broonie@opensource.wolfsonmicro.com Cc: Liam Girdwood lrg@ti.com --- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/anatop-regulator.c | 260 ++++++++++++++++++++++++++++ include/linux/regulator/anatop-regulator.h | 67 +++++++ 4 files changed, 335 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/anatop-regulator.c create mode 100644 include/linux/regulator/anatop-regulator.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 9713b1b..6aebd6d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -327,5 +327,12 @@ config REGULATOR_AAT2870 If you have a AnalogicTech AAT2870 say Y to enable the regulator driver.
+config REGULATOR_ANATOP + tristate "ANATOP LDO regulators" + depends on SOC_IMX6 + default y if SOC_IMX6 + help + Say y here to support ANATOP LDOs regulators. + endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 93a6318..990c332 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -46,5 +46,6 @@ obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o +obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c new file mode 100644 index 0000000..31156d5 --- /dev/null +++ b/drivers/regulator/anatop-regulator.c @@ -0,0 +1,260 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/anatop-regulator.h> + +static int anatop_set_voltage(struct regulator_dev *reg, int min_uV, + int max_uV, unsigned *selector) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + u32 val, rega; + int uv; + + uv = max_uV; + pr_debug("%s: uv %d, min %d, max %d\n", __func__, + uv, reg->constraints->min_uV, + reg->constraints->max_uV); + + if (uv < reg->constraints->min_uV || uv > reg->constraints->max_uV) + return -EINVAL; + + if (anatop_reg->rdata->control_reg) { + val = anatop_reg->rdata->min_bit_val + + (uv - reg->constraints->min_uV) / 25000; + rega = (__raw_readl(anatop_reg->rdata->control_reg) & + ~(anatop_reg->rdata->vol_bit_mask << + anatop_reg->rdata->vol_bit_shift)); + pr_debug("%s: calculated val %d\n", __func__, val); + __raw_writel((val << anatop_reg->rdata->vol_bit_shift) | rega, + anatop_reg->rdata->control_reg); + return 0; + } else { + pr_debug("Regulator not supported.\n"); + return -ENOTSUPP; + } +} + +static int anatop_get_voltage(struct regulator_dev *reg) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + int uv; + struct anatop_regulator_data *rdata = anatop_reg->rdata; + + if (rdata->control_reg) { + u32 val = (__raw_readl(rdata->control_reg) << + rdata->vol_bit_shift) & rdata->vol_bit_mask; + uv = reg->constraints->min_uV + + (val - rdata->min_bit_val) * 25000; + pr_debug("vddio = %d, val=%u\n", uv, val); + return uv; + } else { + pr_debug("Regulator not supported.\n"); + return -ENOTSUPP; + } +} + +static int anatop_enable(struct regulator_dev *reg) +{ + return 0; +} + +static int anatop_disable(struct regulator_dev *reg) +{ + return 0; +} + +static int anatop_is_enabled(struct regulator_dev *reg) +{ + return 1; +} + +static struct regulator_ops anatop_rops = { + .set_voltage = anatop_set_voltage, + .get_voltage = anatop_get_voltage, + .enable = anatop_enable, + .disable = anatop_disable, + .is_enabled = anatop_is_enabled, +}; + +static struct regulator_desc anatop_reg_desc[] = { + { + .name = "vddpu", + .id = ANATOP_VDDPU, + .ops = &anatop_rops, + .irq = 0, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE + }, + { + .name = "vddcore", + .id = ANATOP_VDDCORE, + .ops = &anatop_rops, + .irq = 0, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE + }, + { + .name = "vddsoc", + .id = ANATOP_VDDSOC, + .ops = &anatop_rops, + .irq = 0, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE + }, + { + .name = "vdd2p5", + .id = ANATOP_VDD2P5, + .ops = &anatop_rops, + .irq = 0, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE + }, + { + .name = "vdd1p1", + .id = ANATOP_VDD1P1, + .ops = &anatop_rops, + .irq = 0, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE + }, + { + .name = "vdd3p0", + .id = ANATOP_VDD3P0, + .ops = &anatop_rops, + .irq = 0, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE + }, +}; + +int anatop_regulator_probe(struct platform_device *pdev) +{ + struct regulator_desc *rdesc; + struct regulator_dev *rdev; + struct anatop_regulator *sreg; + struct regulator_init_data *initdata; + + sreg = platform_get_drvdata(pdev); + initdata = pdev->dev.platform_data; + sreg->cur_current = 0; + sreg->next_current = 0; + sreg->cur_voltage = 0; + + init_waitqueue_head(&sreg->wait_q); + spin_lock_init(&sreg->lock); + + if (pdev->id > ANATOP_SUPPLY_NUM) { + rdesc = kzalloc(sizeof(struct regulator_desc), GFP_KERNEL); + memcpy(rdesc, &anatop_reg_desc[ANATOP_SUPPLY_NUM], + sizeof(struct regulator_desc)); + rdesc->name = kstrdup(sreg->rdata->name, GFP_KERNEL); + } else + rdesc = &anatop_reg_desc[pdev->id]; + + pr_debug("probing regulator %s %s %d\n", + sreg->rdata->name, + rdesc->name, + pdev->id); + + /* register regulator */ + rdev = regulator_register(rdesc, &pdev->dev, + initdata, sreg); + + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + rdesc->name); + return PTR_ERR(rdev); + } + + return 0; +} + + +int anatop_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + + return 0; + +} + +int anatop_register_regulator( + struct anatop_regulator *reg_data, int reg, + struct regulator_init_data *initdata) +{ + struct platform_device *pdev; + int ret; + + pdev = platform_device_alloc("anatop_reg", reg); + if (!pdev) + return -ENOMEM; + + pdev->dev.platform_data = initdata; + + platform_set_drvdata(pdev, reg_data); + ret = platform_device_add(pdev); + + if (ret != 0) { + pr_debug("Failed to register regulator %d: %d\n", + reg, ret); + platform_device_del(pdev); + } + pr_debug("register regulator %s, %d: %d\n", + reg_data->rdata->name, reg, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(anatop_register_regulator); + +struct platform_driver anatop_reg = { + .driver = { + .name = "anatop_reg", + }, + .probe = anatop_regulator_probe, + .remove = anatop_regulator_remove, +}; + +int anatop_regulator_init(void) +{ + return platform_driver_register(&anatop_reg); +} + +void anatop_regulator_exit(void) +{ + platform_driver_unregister(&anatop_reg); +} + +postcore_initcall(anatop_regulator_init); +module_exit(anatop_regulator_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("ANATOP Regulator driver"); +MODULE_LICENSE("GPL"); + diff --git a/include/linux/regulator/anatop-regulator.h b/include/linux/regulator/anatop-regulator.h new file mode 100644 index 0000000..70f096b --- /dev/null +++ b/include/linux/regulator/anatop-regulator.h @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __ANATOP_REGULATOR_H +#define __ANATOP_REGULATOR_H +#include <linux/regulator/driver.h> + +/* regulator supplies for Anatop */ +enum anatop_regulator_supplies { + ANATOP_VDDPU, + ANATOP_VDDCORE, + ANATOP_VDDSOC, + ANATOP_VDD2P5, + ANATOP_VDD1P1, + ANATOP_VDD3P0, + ANATOP_SUPPLY_NUM +}; + +struct anatop_regulator { + struct regulator_desc regulator; + struct anatop_regulator *parent; + struct anatop_regulator_data *rdata; + struct completion done; + + spinlock_t lock; + wait_queue_head_t wait_q; + struct notifier_block nb; + + int mode; + int cur_voltage; + int cur_current; + int next_current; +}; + + +struct anatop_regulator_data { + char name[80]; + char *parent_name; + + u32 control_reg; + int vol_bit_shift; + int vol_bit_mask; + int min_bit_val; +}; + +int anatop_register_regulator( + struct anatop_regulator *reg_data, int reg, + struct regulator_init_data *initdata); + +#endif /* __ANATOP_REGULATOR_H */