Separate the TI OHCI OMAP3 host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Anand Gadiyar gadiyar@ti.com Cc: Felipe Balbi balbi@ti.com Cc: Arnd Bergmann arnd@arndb.de Cc: Greg KH greg@kroah.com Cc: Alan Stern stern@rowland.harvard.edu Cc: linux-usb@vger.kernel.org --- drivers/usb/host/Kconfig | 2 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ohci-hcd.c | 20 +------ drivers/usb/host/ohci-omap3.c | 122 ++++++++++++++--------------------------- 4 files changed, 45 insertions(+), 100 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 744673b..f42db93 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -404,7 +404,7 @@ config USB_OHCI_HCD_OMAP1 Enables support for the OHCI controller on OMAP1/2 chips.
config USB_OHCI_HCD_OMAP3 - bool "OHCI support for OMAP3 and later chips" + tristate "OHCI support for OMAP3 and later chips" depends on (ARCH_OMAP3 || ARCH_OMAP4) default y ---help--- diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 1326df2..ceb4e55 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_USB_OHCI_HCD_PCI) += ohci-pci.o obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o +obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_FHCI_HCD) += fhci.o diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 4bfd890..8002bbe 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1178,11 +1178,6 @@ MODULE_LICENSE ("GPL"); #define S3C2410_PLATFORM_DRIVER ohci_hcd_s3c2410_driver #endif
-#ifdef CONFIG_USB_OHCI_HCD_OMAP3 -#include "ohci-omap3.c" -#define OMAP3_PLATFORM_DRIVER ohci_hcd_omap3_driver -#endif - #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #include "ohci-pxa27x.c" #define PLATFORM_DRIVER ohci_hcd_pxa27x_driver @@ -1252,8 +1247,8 @@ MODULE_LICENSE ("GPL"); !IS_ENABLED(CONFIG_USB_OHCI_HCD_PLATFORM) && \ !IS_ENABLED(CONFIG_USB_OHCI_EXYNOS) && \ !IS_ENABLED(CONFIG_USB_OHCI_HCD_OMAP1) && \ + !IS_ENABLED(CONFIG_USB_OHCI_HCD_OMAP3) && \ !defined(PLATFORM_DRIVER) && \ - !defined(OMAP3_PLATFORM_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ !defined(SA1111_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ @@ -1300,12 +1295,6 @@ static int __init ohci_hcd_mod_init(void) goto error_platform; #endif
-#ifdef OMAP3_PLATFORM_DRIVER - retval = platform_driver_register(&OMAP3_PLATFORM_DRIVER); - if (retval < 0) - goto error_omap3_platform; -#endif - #ifdef OF_PLATFORM_DRIVER retval = platform_driver_register(&OF_PLATFORM_DRIVER); if (retval < 0) @@ -1409,10 +1398,6 @@ static int __init ohci_hcd_mod_init(void) platform_driver_unregister(&OF_PLATFORM_DRIVER); error_of_platform: #endif -#ifdef OMAP3_PLATFORM_DRIVER - platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); - error_omap3_platform: -#endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); error_platform: @@ -1464,9 +1449,6 @@ static void __exit ohci_hcd_mod_exit(void) #ifdef OF_PLATFORM_DRIVER platform_driver_unregister(&OF_PLATFORM_DRIVER); #endif -#ifdef OMAP3_PLATFORM_DRIVER - platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); -#endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); #endif diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index 08e811d..1d30bc8 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -29,90 +29,22 @@ * - add kernel-doc */
+#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/usb/otg.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/of.h> -#include <linux/dma-mapping.h> - -/*-------------------------------------------------------------------------*/ - -static int ohci_omap3_init(struct usb_hcd *hcd) -{ - dev_dbg(hcd->self.controller, "starting OHCI controller\n"); - - return ohci_init(hcd_to_ohci(hcd)); -} - -/*-------------------------------------------------------------------------*/ - -static int ohci_omap3_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - /* - * RemoteWakeupConnected has to be set explicitly before - * calling ohci_run. The reset value of RWC is 0. - */ - ohci->hc_control = OHCI_CTRL_RWC; - writel(OHCI_CTRL_RWC, &ohci->regs->control); - - ret = ohci_run(ohci); - - if (ret < 0) { - dev_err(hcd->self.controller, "can't start\n"); - ohci_stop(hcd); - } +#include <linux/usb.h> +#include <linux/usb/hcd.h>
- return ret; -} +#include "ohci.h"
-/*-------------------------------------------------------------------------*/ +#define DRIVER_DESC "OHCI OMAP3 driver"
-static const struct hc_driver ohci_omap3_hc_driver = { - .description = hcd_name, - .product_desc = "OMAP3 OHCI Host Controller", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .reset = ohci_omap3_init, - .start = ohci_omap3_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ +static const char hcd_name[] = "ohci-omap3"; +static struct hc_driver __read_mostly ohci_omap3_hc_driver;
static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32);
@@ -131,6 +63,7 @@ static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32); static int ohci_hcd_omap3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct ohci_hcd *ohci; struct usb_hcd *hcd = NULL; void __iomem *regs = NULL; struct resource *res; @@ -185,7 +118,16 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) pm_runtime_enable(dev); pm_runtime_get_sync(dev);
- ohci_hcd_init(hcd_to_ohci(hcd)); + ohci = hcd_to_ohci(hcd); + /* + * RemoteWakeupConnected has to be set explicitly before + * calling ohci_run. The reset value of RWC is 0. + */ + ohci->hc_control = OHCI_CTRL_RWC; + writel(OHCI_CTRL_RWC, &ohci->regs->control); + dev_dbg(hcd->self.controller, "starting OHCI controller\n"); + + ohci_setup(hcd);
ret = usb_add_hcd(hcd, irq, 0); if (ret) { @@ -256,5 +198,25 @@ static struct platform_driver ohci_hcd_omap3_driver = { }, };
+static int __init ohci_omap3_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ohci_init_driver(&ohci_omap3_hc_driver, NULL); + return platform_driver_register(&ohci_hcd_omap3_driver); +} +module_init(ohci_omap3_init); + +static void __exit ohci_omap3_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_omap3_driver); +} +module_exit(ohci_omap3_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_ALIAS("platform:ohci-omap3"); MODULE_AUTHOR("Anand Gadiyar gadiyar@ti.com"); +MODULE_LICENSE("GPL");