This patch adds a new trip type THERMAL_TRIP_STATE_ACTIVE. This trip behaves same as THERMAL_TRIP_ACTIVE but also passes the cooling device instance number. This helps the cooling device registered as different instances to perform appropriate cooling action decision in the set_cur_state call back function.
Also since the trip temperature's are in ascending order so some logic is put in place to skip the un-necessary checks.
Signed-off-by: Amit Daniel Kachhap amit.kachhap@linaro.org --- Documentation/thermal/sysfs-api.txt | 4 ++-- drivers/thermal/thermal_sys.c | 27 ++++++++++++++++++++++++++- include/linux/thermal.h | 1 + 3 files changed, 29 insertions(+), 3 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index b61e46f..5c1d44e 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -184,8 +184,8 @@ trip_point_[0-*]_temp
trip_point_[0-*]_type Strings which indicate the type of the trip point. - E.g. it can be one of critical, hot, passive, active[0-*] for ACPI - thermal zone. + E.g. it can be one of critical, hot, passive, active[0-1], + state-active[0-*] for ACPI thermal zone. RO, Optional
cdev[0-*] diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index dd9a574..72b1ab3 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -192,6 +192,8 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "passive\n"); case THERMAL_TRIP_ACTIVE: return sprintf(buf, "active\n"); + case THERMAL_TRIP_STATE_ACTIVE: + return sprintf(buf, "state-active\n"); default: return sprintf(buf, "unknown\n"); } @@ -1035,7 +1037,7 @@ EXPORT_SYMBOL(thermal_cooling_device_unregister); void thermal_zone_device_update(struct thermal_zone_device *tz) { int count, ret = 0; - long temp, trip_temp; + long temp, trip_temp, max_state, last_trip_change = 0; enum thermal_trip_type trip_type; struct thermal_cooling_device_instance *instance; struct thermal_cooling_device *cdev; @@ -1086,6 +1088,29 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) cdev->ops->set_cur_state(cdev, 0); } break; + case THERMAL_TRIP_STATE_ACTIVE: + list_for_each_entry(instance, &tz->cooling_devices, + node) { + if (instance->trip != count) + continue; + + if (temp <= last_trip_change) + continue; + + cdev = instance->cdev; + cdev->ops->get_max_state(cdev, &max_state); + + if ((temp >= trip_temp) && + ((count + 1) <= max_state)) + cdev->ops->set_cur_state(cdev, + count + 1); + else if ((temp < trip_temp) && + (count <= max_state)) + cdev->ops->set_cur_state(cdev, count); + + last_trip_change = trip_temp; + } + break; case THERMAL_TRIP_PASSIVE: if (temp >= trip_temp || tz->passive) thermal_zone_device_passive(tz, temp, diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 47b4a27..d7d0a27 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -42,6 +42,7 @@ enum thermal_trip_type { THERMAL_TRIP_PASSIVE, THERMAL_TRIP_HOT, THERMAL_TRIP_CRITICAL, + THERMAL_TRIP_STATE_ACTIVE, };
struct thermal_zone_device_ops {