Hi
Today morning I've noticed that my beagle C4 is not working well.
This is the output a seen on serial:
(Also here: https://pastebin.linaro.org/424/)
40W U-Boot SPL 2011.12 (Feb 16 2012 - 21:43:13) Texas Instruments Revision detection unimplemented OMAP SD/MMC: 0 mmc_send_cmd: timedout waiting for cmddis! ** Can't read from device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###
The SD card is connected via uSD -> SD adapter and works fine in other boards. I've tried re-attaching everything a dozen times.
Thanks ZK
W dniu 09.03.2012 13:41, Zygmunt Krynicki pisze:
Hi
Today morning I've noticed that my beagle C4 is not working well.
Update: it seems that SD card is working somewhat as without it U-Boot does not load and none of the output is there. I'll try re-flashing that card (brand new, used _once_) and check again.
This is the output a seen on serial:
(Also here: https://pastebin.linaro.org/424/)
40W U-Boot SPL 2011.12 (Feb 16 2012 - 21:43:13) Texas Instruments Revision detection unimplemented OMAP SD/MMC: 0 mmc_send_cmd: timedout waiting for cmddis! ** Can't read from device 0 ** spl: fat register err - -1 ### ERROR ### Please RESET the board ###
The SD card is connected via uSD -> SD adapter and works fine in other boards. I've tried re-attaching everything a dozen times.
Thanks ZK
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
-
Zygmunt Krynicki -
Zygmunt Krynicki