The nr_busy_cpus field of the sched_group_power is sometime different from 0 whereas the platform is fully idle. This serie fixes 3 use cases: - when some CPUs enter idle state while booting all CPUs - when a CPU is unplug and/or replug
Change since V1: - remove the patch for SCHED softirq on an idle core use case as it was a side effect of the other use cases.
Vincent Guittot (2): sched: fix init NOHZ_IDLE flag sched: fix update NOHZ_IDLE flag
kernel/sched/core.c | 1 + kernel/sched/fair.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
On my smp platform which is made of 5 cores in 2 clusters,I have the nr_busy_cpu field of sched_group_power struct that is not null when the platform is fully idle. The root cause seems to be: During the boot sequence, some CPUs reach the idle loop and set their NOHZ_IDLE flag while waiting for others CPUs to boot. But the nr_busy_cpus field is initialized later with the assumption that all CPUs are in the busy state whereas some CPUs have already set their NOHZ_IDLE flag. We clear the NOHZ_IDLE flag when nr_busy_cpus is initialized in order to have a coherent configuration.
Signed-off-by: Vincent Guittot vincent.guittot@linaro.org --- kernel/sched/core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 257002c..fd41924 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5884,6 +5884,7 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
update_group_power(sd, cpu); atomic_set(&sg->sgp->nr_busy_cpus, sg->group_weight); + clear_bit(NOHZ_IDLE, nohz_flags(cpu)); }
int __weak arch_sd_sibling_asym_packing(void)
2013/1/29 Vincent Guittot vincent.guittot@linaro.org:
On my smp platform which is made of 5 cores in 2 clusters,I have the nr_busy_cpu field of sched_group_power struct that is not null when the platform is fully idle. The root cause seems to be: During the boot sequence, some CPUs reach the idle loop and set their NOHZ_IDLE flag while waiting for others CPUs to boot. But the nr_busy_cpus field is initialized later with the assumption that all CPUs are in the busy state whereas some CPUs have already set their NOHZ_IDLE flag. We clear the NOHZ_IDLE flag when nr_busy_cpus is initialized in order to have a coherent configuration.
Signed-off-by: Vincent Guittot vincent.guittot@linaro.org
kernel/sched/core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 257002c..fd41924 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5884,6 +5884,7 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
update_group_power(sd, cpu); atomic_set(&sg->sgp->nr_busy_cpus, sg->group_weight);
clear_bit(NOHZ_IDLE, nohz_flags(cpu));
So that's a real issue indeed. nr_busy_cpus was never correct.
Now I'm still a bit worried with this solution. What if an idle task started in smp_init() has not yet stopped its tick, but is about to do so? The domains are not yet available to the task but the nohz flags are. When it later restarts the tick, it's going to erroneously increase nr_busy_cpus.
It probably won't happen in practice. But then there is more: sched domains can be concurrently rebuild anytime, right? So what if we call set_cpu_sd_state_idle() and decrease nr_busy_cpus while the domain is switched concurrently. Are we having a new sched group along the way? If so we have a bug here as well because we can have NOHZ_IDLE set but nr_busy_cpus accounting the CPU.
May be we need to set the per cpu nohz flags on the child leaf sched domain? This way it's initialized and stored on the same RCU pointer and we nohz_flags and nr_busy_cpus become sync.
Also we probably still need the first patch of your previous round. Because the current patch may introduce situations where we have idle CPUs with NOHZ_IDLE flags cleared.
On 1 February 2013 19:03, Frederic Weisbecker fweisbec@gmail.com wrote:
2013/1/29 Vincent Guittot vincent.guittot@linaro.org:
On my smp platform which is made of 5 cores in 2 clusters,I have the nr_busy_cpu field of sched_group_power struct that is not null when the platform is fully idle. The root cause seems to be: During the boot sequence, some CPUs reach the idle loop and set their NOHZ_IDLE flag while waiting for others CPUs to boot. But the nr_busy_cpus field is initialized later with the assumption that all CPUs are in the busy state whereas some CPUs have already set their NOHZ_IDLE flag. We clear the NOHZ_IDLE flag when nr_busy_cpus is initialized in order to have a coherent configuration.
Signed-off-by: Vincent Guittot vincent.guittot@linaro.org
kernel/sched/core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 257002c..fd41924 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5884,6 +5884,7 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
update_group_power(sd, cpu); atomic_set(&sg->sgp->nr_busy_cpus, sg->group_weight);
clear_bit(NOHZ_IDLE, nohz_flags(cpu));So that's a real issue indeed. nr_busy_cpus was never correct.
Now I'm still a bit worried with this solution. What if an idle task started in smp_init() has not yet stopped its tick, but is about to do so? The domains are not yet available to the task but the nohz flags are. When it later restarts the tick, it's going to erroneously increase nr_busy_cpus.
My 1st idea was to clear NOHZ_IDLE flag and nr_busy_cpus in init_sched_groups_power instead of setting them as it is done now. If a CPU enters idle during the init sequence, the flag is already cleared, and nohz_flags and nr_busy_cpus will stay synced and cleared while a NULL sched_domain is attached to the CPU thanks to patch 2. This should solve all use cases ?
It probably won't happen in practice. But then there is more: sched domains can be concurrently rebuild anytime, right? So what if we call set_cpu_sd_state_idle() and decrease nr_busy_cpus while the domain is switched concurrently. Are we having a new sched group along the way? If so we have a bug here as well because we can have NOHZ_IDLE set but nr_busy_cpus accounting the CPU.
When the sched_domain are rebuilt, we set a null sched_domain during the rebuild sequence and a new sched_group_power is created as well
May be we need to set the per cpu nohz flags on the child leaf sched domain? This way it's initialized and stored on the same RCU pointer and we nohz_flags and nr_busy_cpus become sync.
Also we probably still need the first patch of your previous round. Because the current patch may introduce situations where we have idle CPUs with NOHZ_IDLE flags cleared.
2013/2/4 Vincent Guittot vincent.guittot@linaro.org:
On 1 February 2013 19:03, Frederic Weisbecker fweisbec@gmail.com wrote:
diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 257002c..fd41924 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5884,6 +5884,7 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
update_group_power(sd, cpu); atomic_set(&sg->sgp->nr_busy_cpus, sg->group_weight);
clear_bit(NOHZ_IDLE, nohz_flags(cpu));So that's a real issue indeed. nr_busy_cpus was never correct.
Now I'm still a bit worried with this solution. What if an idle task started in smp_init() has not yet stopped its tick, but is about to do so? The domains are not yet available to the task but the nohz flags are. When it later restarts the tick, it's going to erroneously increase nr_busy_cpus.
My 1st idea was to clear NOHZ_IDLE flag and nr_busy_cpus in init_sched_groups_power instead of setting them as it is done now. If a CPU enters idle during the init sequence, the flag is already cleared, and nohz_flags and nr_busy_cpus will stay synced and cleared while a NULL sched_domain is attached to the CPU thanks to patch 2. This should solve all use cases ?
This may work on smp_init(). But the per cpu domain can be changed concurrently anytime on cpu hotplug, with a new sched group power struct, right?
What if the following happen (inventing function names but you get the idea):
CPU 0 CPU 1
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); old_dom =get_dom() clear_idle(CPU 1) } rcu_assign_pointer(cpu1_dom, dom);
Can this scenario happen?
It probably won't happen in practice. But then there is more: sched domains can be concurrently rebuild anytime, right? So what if we call set_cpu_sd_state_idle() and decrease nr_busy_cpus while the domain is switched concurrently. Are we having a new sched group along the way? If so we have a bug here as well because we can have NOHZ_IDLE set but nr_busy_cpus accounting the CPU.
When the sched_domain are rebuilt, we set a null sched_domain during the rebuild sequence and a new sched_group_power is created as well
So at that time we may race with a CPU setting/clearing its NOHZ_IDLE flag as in my above scenario?
On 8 February 2013 16:35, Frederic Weisbecker fweisbec@gmail.com wrote:
2013/2/4 Vincent Guittot vincent.guittot@linaro.org:
On 1 February 2013 19:03, Frederic Weisbecker fweisbec@gmail.com wrote:
diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 257002c..fd41924 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5884,6 +5884,7 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
update_group_power(sd, cpu); atomic_set(&sg->sgp->nr_busy_cpus, sg->group_weight);
clear_bit(NOHZ_IDLE, nohz_flags(cpu));So that's a real issue indeed. nr_busy_cpus was never correct.
Now I'm still a bit worried with this solution. What if an idle task started in smp_init() has not yet stopped its tick, but is about to do so? The domains are not yet available to the task but the nohz flags are. When it later restarts the tick, it's going to erroneously increase nr_busy_cpus.
My 1st idea was to clear NOHZ_IDLE flag and nr_busy_cpus in init_sched_groups_power instead of setting them as it is done now. If a CPU enters idle during the init sequence, the flag is already cleared, and nohz_flags and nr_busy_cpus will stay synced and cleared while a NULL sched_domain is attached to the CPU thanks to patch 2. This should solve all use cases ?
This may work on smp_init(). But the per cpu domain can be changed concurrently anytime on cpu hotplug, with a new sched group power struct, right?
During a cpu hotplug, a null domain is attached to each CPU of the partition because we have to build new sched_domains so we have a similar behavior than smp_init. So if we clear NOHZ_IDLE flag and nr_busy_cpus in init_sched_groups_power, we should be safe for init and hotplug.
More generally speaking, if the sched_domains of a group of CPUs must be rebuilt, a NULL sched_domain is attached to these CPUs during the build
What if the following happen (inventing function names but you get the idea):
CPU 0 CPU 1
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); old_dom =get_dom() clear_idle(CPU 1) } rcu_assign_pointer(cpu1_dom, dom);
Can this scenario happen?
This scenario will be:
CPU 0 CPU 1
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); old_dom =get_dom() old_dom is null //clear_idle(CPU 1) can't happen because a null domain is attached so we will never call nohz_kick_needed which is the only place where we can clear_idle } rcu_assign_pointer(cpu1_dom, dom);
It probably won't happen in practice. But then there is more: sched domains can be concurrently rebuild anytime, right? So what if we call set_cpu_sd_state_idle() and decrease nr_busy_cpus while the domain is switched concurrently. Are we having a new sched group along the way? If so we have a bug here as well because we can have NOHZ_IDLE set but nr_busy_cpus accounting the CPU.
When the sched_domain are rebuilt, we set a null sched_domain during the rebuild sequence and a new sched_group_power is created as well
So at that time we may race with a CPU setting/clearing its NOHZ_IDLE flag as in my above scenario?
Unless i have missed a use case, we always have a null domain attached to a CPU while we build the new one. So the patch 2/2 should protect us against clearing the NOHZ_IDLE whereas the new nr_busy_cpus is not yet attached.
I'm going to send a new version which set the NOHZ_IDLE bit and clear nr_busy_cpus during the built of a sched_domain
Vincent
2013/2/8 Vincent Guittot vincent.guittot@linaro.org:
On 8 February 2013 16:35, Frederic Weisbecker fweisbec@gmail.com wrote:
What if the following happen (inventing function names but you get the idea):
CPU 0 CPU 1
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); old_dom =get_dom() clear_idle(CPU 1) } rcu_assign_pointer(cpu1_dom, dom);
Can this scenario happen?
This scenario will be:
CPU 0 CPU 1
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); old_dom =get_dom() old_dom is null //clear_idle(CPU
- can't happen because a null domain is attached so we will never
call nohz_kick_needed which is the only place where we can clear_idle } rcu_assign_pointer(cpu1_dom, dom);
So is the following possible?
= CPU 0 = = CPU 1=
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); }
clear_idle(CPU 1)
dom = rcu_dereference(cpu1_dom)
//dom == NULL, return
rcu_assign_pointer(cpu1_dom, NULL);
set_idle(CPU 1)
dom = rcu_dereference(cpu1_dom)
//dec nr_cpus_busy, making it negative
2013/2/18 Frederic Weisbecker fweisbec@gmail.com:
2013/2/8 Vincent Guittot vincent.guittot@linaro.org:
On 8 February 2013 16:35, Frederic Weisbecker fweisbec@gmail.com wrote:
What if the following happen (inventing function names but you get the idea):
CPU 0 CPU 1
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); old_dom =get_dom() clear_idle(CPU 1) } rcu_assign_pointer(cpu1_dom, dom);
Can this scenario happen?
This scenario will be:
CPU 0 CPU 1
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); old_dom =get_dom() old_dom is null //clear_idle(CPU
- can't happen because a null domain is attached so we will never
call nohz_kick_needed which is the only place where we can clear_idle } rcu_assign_pointer(cpu1_dom, dom);
So is the following possible?
= CPU 0 = = CPU 1=
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); }
clear_idle(CPU 1)
dom = rcu_dereference(cpu1_dom)
//dom == NULL, return
rcu_assign_pointer(cpu1_dom, NULL);
set_idle(CPU 1)
dom = rcu_dereference(cpu1_dom)
//dec nr_cpus_busy, making it negative
Sorry, gmail messed up as usual.
I pasted the original at: http://pastebin.com/DMm5U8J8
On 18 February 2013 15:38, Frederic Weisbecker fweisbec@gmail.com wrote:
2013/2/18 Frederic Weisbecker fweisbec@gmail.com:
2013/2/8 Vincent Guittot vincent.guittot@linaro.org:
On 8 February 2013 16:35, Frederic Weisbecker fweisbec@gmail.com wrote:
What if the following happen (inventing function names but you get the idea):
CPU 0 CPU 1
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); old_dom =get_dom() clear_idle(CPU 1) } rcu_assign_pointer(cpu1_dom, dom);
Can this scenario happen?
This scenario will be:
CPU 0 CPU 1
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); old_dom =get_dom() old_dom is null //clear_idle(CPU
- can't happen because a null domain is attached so we will never
call nohz_kick_needed which is the only place where we can clear_idle } rcu_assign_pointer(cpu1_dom, dom);
So is the following possible?
= CPU 0 = = CPU 1=
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); }
clear_idle(CPU 1)
dom = rcu_dereference(cpu1_dom)
//dom == NULL, return
rcu_assign_pointer(cpu1_dom, NULL);
set_idle(CPU 1)
dom = rcu_dereference(cpu1_dom)
//dec nr_cpus_busy, making it negative
Sorry, gmail messed up as usual.
I pasted the original at: http://pastebin.com/DMm5U8J8
We can clear the idle flag only in the nohz_kick_needed which will not be called if the sched_domain is NULL so the sequence will be
= CPU 0 = = CPU 1=
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); } dom = rcu_dereference(cpu1_dom) //dom == NULL, return
rcu_assign_pointer(cpu1_dom, dom);
dom = rcu_dereference(cpu1_dom) //dom != NULL, nohz_kick_needed {
set_idle(CPU 1) dom = rcu_dereference(cpu1_dom)
//dec nr_cpus_busy, }
Vincent
2013/2/18 Vincent Guittot vincent.guittot@linaro.org:
On 18 February 2013 15:38, Frederic Weisbecker fweisbec@gmail.com wrote:
I pasted the original at: http://pastebin.com/DMm5U8J8
We can clear the idle flag only in the nohz_kick_needed which will not be called if the sched_domain is NULL so the sequence will be
= CPU 0 = = CPU 1=
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); } dom = rcu_dereference(cpu1_dom) //dom == NULL, return
rcu_assign_pointer(cpu1_dom, dom);
dom =rcu_dereference(cpu1_dom) //dom != NULL, nohz_kick_needed {
set_idle(CPU 1) dom = rcu_dereference(cpu1_dom)
//dec nr_cpus_busy, }
Vincent
Ok but CPU 0 can assign NULL to the domain of cpu1 while CPU 1 is already in the middle of nohz_kick_needed().
On 18 February 2013 16:40, Frederic Weisbecker fweisbec@gmail.com wrote:
2013/2/18 Vincent Guittot vincent.guittot@linaro.org:
On 18 February 2013 15:38, Frederic Weisbecker fweisbec@gmail.com wrote:
I pasted the original at: http://pastebin.com/DMm5U8J8
We can clear the idle flag only in the nohz_kick_needed which will not be called if the sched_domain is NULL so the sequence will be
= CPU 0 = = CPU 1=
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); } dom = rcu_dereference(cpu1_dom) //dom == NULL, return
rcu_assign_pointer(cpu1_dom, dom);
dom =rcu_dereference(cpu1_dom) //dom != NULL, nohz_kick_needed {
set_idle(CPU 1) dom = rcu_dereference(cpu1_dom)
//dec nr_cpus_busy, }
Vincent
Ok but CPU 0 can assign NULL to the domain of cpu1 while CPU 1 is already in the middle of nohz_kick_needed().
Yes nothing prevents the sequence below to occur
= CPU 0 = = CPU 1= dom = rcu_dereference(cpu1_dom) //dom != NULL detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; //nr_cpus_busy in the new_dom set_idle(CPU 1); } nohz_kick_needed { clear_idle(CPU 1) dom = rcu_dereference(cpu1_dom)
//cpu1_dom == old_dom inc nr_cpus_busy,
//nr_cpus_busy in the old_dom }
rcu_assign_pointer(cpu1_dom, dom); //cpu1_dom == new_dom
I'm not sure that this can happen in practice because CPU1 is in interrupt handler but we don't have any mechanism to prevent the sequence.
The NULL sched_domain can be used to detect this situation and the set_cpu_sd_state_busy function can be modified like below
inline void set_cpu_sd_state_busy { struct sched_domain *sd; int cpu = smp_processor_id(); + int clear = 0;
if (!test_bit(NOHZ_IDLE, nohz_flags(cpu))) return; - clear_bit(NOHZ_IDLE, nohz_flags(cpu));
rcu_read_lock(); for_each_domain(cpu, sd) { atomic_inc(&sd->groups->sgp->nr_busy_cpus); + clear = 1; } rcu_read_unlock(); + + if (likely(clear)) + clear_bit(NOHZ_IDLE, nohz_flags(cpu)); }
The NOHZ_IDLE flag will not be clear if we have a NULL sched_domain attached to the CPU. With this implementation, we still don't need to get the sched_domain for testing the NOHZ_IDLE flag which occurs each time CPU becomes idle
The patch 2 become useless
Vincent
On 19 February 2013 11:29, Vincent Guittot vincent.guittot@linaro.org wrote:
On 18 February 2013 16:40, Frederic Weisbecker fweisbec@gmail.com wrote:
2013/2/18 Vincent Guittot vincent.guittot@linaro.org:
On 18 February 2013 15:38, Frederic Weisbecker fweisbec@gmail.com wrote:
I pasted the original at: http://pastebin.com/DMm5U8J8
We can clear the idle flag only in the nohz_kick_needed which will not be called if the sched_domain is NULL so the sequence will be
= CPU 0 = = CPU 1=
detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; set_idle(CPU 1); } dom = rcu_dereference(cpu1_dom) //dom == NULL, return
rcu_assign_pointer(cpu1_dom, dom);
dom =rcu_dereference(cpu1_dom) //dom != NULL, nohz_kick_needed {
set_idle(CPU 1) dom = rcu_dereference(cpu1_dom)
//dec nr_cpus_busy, }
Vincent
Ok but CPU 0 can assign NULL to the domain of cpu1 while CPU 1 is already in the middle of nohz_kick_needed().
Yes nothing prevents the sequence below to occur
= CPU 0 = = CPU 1= dom = rcu_dereference(cpu1_dom) //dom != NULL detach_and_destroy_domain { rcu_assign_pointer(cpu1_dom, NULL); }
dom = new_domain(...) { nr_cpus_busy = 0; //nr_cpus_busy in the new_dom set_idle(CPU 1); } nohz_kick_needed { clear_idle(CPU 1) dom = rcu_dereference(cpu1_dom)
//cpu1_dom == old_dom inc nr_cpus_busy,
//nr_cpus_busy in the old_dom }
rcu_assign_pointer(cpu1_dom, dom); //cpu1_dom == new_dom
The sequence above is not correct in addition to become unreadable after going through gmail
The correct and readable version https://pastebin.linaro.org/1750/
Vincent
I'm not sure that this can happen in practice because CPU1 is in interrupt handler but we don't have any mechanism to prevent the sequence.
The NULL sched_domain can be used to detect this situation and the set_cpu_sd_state_busy function can be modified like below
inline void set_cpu_sd_state_busy { struct sched_domain *sd; int cpu = smp_processor_id();
int clear = 0; if (!test_bit(NOHZ_IDLE, nohz_flags(cpu))) return;
clear_bit(NOHZ_IDLE, nohz_flags(cpu)); rcu_read_lock(); for_each_domain(cpu, sd) { atomic_inc(&sd->groups->sgp->nr_busy_cpus);
clear = 1; } rcu_read_unlock();if (likely(clear))clear_bit(NOHZ_IDLE, nohz_flags(cpu));}
The NOHZ_IDLE flag will not be clear if we have a NULL sched_domain attached to the CPU. With this implementation, we still don't need to get the sched_domain for testing the NOHZ_IDLE flag which occurs each time CPU becomes idle
The patch 2 become useless
Vincent
The function nohz_kick_needed modifies NOHZ_IDLE flag that is used to update the nr_busy_cpus of the sched_group. When the sched_domain are updated (during the boot or because of the unplug of a CPUs as an example) a null_domain is attached to CPUs. We have to test likely(!on_null_domain(cpu) first in order to detect such intialization step and to not modify the NOHZ_IDLE flag
Signed-off-by: Vincent Guittot vincent.guittot@linaro.org --- kernel/sched/fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 5eea870..dac2edf 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5695,7 +5695,7 @@ void trigger_load_balance(struct rq *rq, int cpu) likely(!on_null_domain(cpu))) raise_softirq(SCHED_SOFTIRQ); #ifdef CONFIG_NO_HZ - if (nohz_kick_needed(rq, cpu) && likely(!on_null_domain(cpu))) + if (likely(!on_null_domain(cpu)) && nohz_kick_needed(rq, cpu)) nohz_balancer_kick(cpu); #endif }
On 29 January 2013 16:08, Vincent Guittot vincent.guittot@linaro.org wrote:
The nr_busy_cpus field of the sched_group_power is sometime different from 0 whereas the platform is fully idle. This serie fixes 3 use cases:
- when some CPUs enter idle state while booting all CPUs
- when a CPU is unplug and/or replug
Pushed as fix-nr-busy-cpus-v2
-
Frederic Weisbecker -
Vincent Guittot -
Viresh Kumar