Enable burst transfer from AHB for EHCI. This fixes data transfer issue of USB Ethernet with EHCI. Without this patch, ping works and network utilities such as scp hardly works.
It was tested on Origen board with the following configs. root@linaro-alip:~# lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=s5p-ehci/3p, 480M |__ Port 1: Dev 2, If 0, Class=vend., Driver=MOSCHIP usb-ethernet driver, 480M
Sangwook Lee (2): ARM: EXYNOS: Add EHCI AHB burst function USB: ehci-s5p: add function for burst
arch/arm/mach-exynos/setup-usb-phy.c | 6 ++++++ arch/arm/plat-samsung/devs.c | 2 ++ arch/arm/plat-samsung/include/plat/ehci.h | 19 +++++++++++++++++++ drivers/usb/host/ehci-s5p.c | 3 +++ 4 files changed, 30 insertions(+), 0 deletions(-)
Enable burst transfer from AHB for EHCI. This fixes data transfer of USB Ethernet with EHCI. Without this patch, scp hardly works.
Signed-off-by: Sangwook Lee sangwook.lee@linaro.org --- arch/arm/mach-exynos/setup-usb-phy.c | 6 ++++++ arch/arm/plat-samsung/devs.c | 2 ++ arch/arm/plat-samsung/include/plat/ehci.h | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 41743d2..5a20460 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -18,6 +18,7 @@ #include <mach/regs-usb-phy.h> #include <plat/cpu.h> #include <plat/usb-phy.h> +#include <plat/ehci.h>
static atomic_t host_usage;
@@ -149,3 +150,8 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL; } + +void s5p_ehci_burst_enable(struct platform_device *pdev, void __iomem *base) +{ + writel(EHCI_INSNREG00_ENABLE_BURST, base + EHCI_INSNREG00); +} diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index f10768e..8fd1bd3 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1402,6 +1402,8 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) npd->phy_init = s5p_usb_phy_init; if (!npd->phy_exit) npd->phy_exit = s5p_usb_phy_exit; + if (!npd->burst_enable) + npd->burst_enable = s5p_ehci_burst_enable; } #endif /* CONFIG_S5P_DEV_USB_EHCI */
diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h index 5f28cae..9c866b7 100644 --- a/arch/arm/plat-samsung/include/plat/ehci.h +++ b/arch/arm/plat-samsung/include/plat/ehci.h @@ -14,8 +14,27 @@ struct s5p_ehci_platdata { int (*phy_init)(struct platform_device *pdev, int type); int (*phy_exit)(struct platform_device *pdev, int type); + void (*burst_enable)(struct platform_device *pdev, void __iomem *base); };
extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); +extern void s5p_ehci_burst_enable(struct platform_device *pdev, + void __iomem *base); + +/* EHCI EXYNOS specific register */ +#define EHCI_INSNREG00 0x90 + +/* + * EHCI INSNREG00 Specific fields + * Enable AHB master to use burst transfer from 4 to 16 + */ +#define EHCI_INSNREG00_ENABLE_INCR16 (1 << 25) +#define EHCI_INSNREG00_ENABLE_INCR8 (1 << 24) +#define EHCI_INSNREG00_ENABLE_INCR4 (1 << 23) +/* Force AHB master to start burst transfer only for 4,8,16 alignment */ +#define EHCI_INSNREG00_ENABLE_INCRX_ALIGN (1 << 22) +#define EHCI_INSNREG00_ENABLE_BURST \ + (EHCI_INSNREG00_ENABLE_INCR16 | EHCI_INSNREG00_ENABLE_INCR8 | \ + EHCI_INSNREG00_ENABLE_INCR4 | EHCI_INSNREG00_ENABLE_INCRX_ALIGN)
#endif /* __PLAT_SAMSUNG_EHCI_H */
Hi Sangwook,
On 29 February 2012 18:11, Sangwook Lee sangwook.lee@linaro.org wrote:
Enable burst transfer from AHB for EHCI. This fixes data transfer of USB Ethernet with EHCI. Without this patch, scp hardly works.
Signed-off-by: Sangwook Lee sangwook.lee@linaro.org
arch/arm/mach-exynos/setup-usb-phy.c | 6 ++++++ arch/arm/plat-samsung/devs.c | 2 ++ arch/arm/plat-samsung/include/plat/ehci.h | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 41743d2..5a20460 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -18,6 +18,7 @@ #include <mach/regs-usb-phy.h> #include <plat/cpu.h> #include <plat/usb-phy.h> +#include <plat/ehci.h>
static atomic_t host_usage;
@@ -149,3 +150,8 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL; }
+void s5p_ehci_burst_enable(struct platform_device *pdev, void __iomem *base) +{
- writel(EHCI_INSNREG00_ENABLE_BURST, base + EHCI_INSNREG00);
+}
This functionality can be added in ehci-s5p itself and avoid adding a new platform callback in platform data. If this is specific to exynos, driver data could be added in ehci-s5p to indicate platforms that need this to be enabled.
Thanks, Thomas.
[...]
Hi,
-----Original Message----- From: Thomas Abraham [mailto:thomas.abraham@linaro.org] Sent: Wednesday, February 29, 2012 10:02 PM To: Sangwook Lee Cc: linux-samsung-soc@vger.kernel.org; linux-usb@vger.kernel.org; linux-arm-kernel@lists.infradead.org; ben-linux@fluff.org; gregkh@suse.de; kgene.kim@samsung.com; stern@rowland.harvard.edu; jg1.han@samsung.com; jy0922.shim@samsung.com; patches@linaro.org; linaro-dev@lists.linaro.org; linux@arm.linux.org.uk Subject: Re: [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function
Hi Sangwook,
On 29 February 2012 18:11, Sangwook Lee sangwook.lee@linaro.org wrote:
Enable burst transfer from AHB for EHCI. This fixes data transfer of USB Ethernet with EHCI. Without this patch, scp hardly works.
Signed-off-by: Sangwook Lee sangwook.lee@linaro.org
arch/arm/mach-exynos/setup-usb-phy.c | 6 ++++++ arch/arm/plat-samsung/devs.c | 2 ++ arch/arm/plat-samsung/include/plat/ehci.h | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 41743d2..5a20460 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -18,6 +18,7 @@ #include <mach/regs-usb-phy.h> #include <plat/cpu.h> #include <plat/usb-phy.h> +#include <plat/ehci.h>
static atomic_t host_usage;
@@ -149,3 +150,8 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL; }
+void s5p_ehci_burst_enable(struct platform_device *pdev, void __iomem *base) +{
- writel(EHCI_INSNREG00_ENABLE_BURST, base + EHCI_INSNREG00);
+}
This functionality can be added in ehci-s5p itself and avoid adding a new platform callback in platform data. If this is specific to exynos, driver data could be added in ehci-s5p to indicate platforms that need this to be enabled.
I agree with Thomas's opinion. Sangwook, please don't call s5p_ehci_burst_enable using platform callback. It can be added to ehci-s5p itself.
Thanks, Thomas.
[...]
On 29/02/12 13:01, Thomas Abraham wrote:
Hi Sangwook,
On 29 February 2012 18:11, Sangwook Leesangwook.lee@linaro.org wrote:
Enable burst transfer from AHB for EHCI. This fixes data transfer of USB Ethernet with EHCI. Without this patch, scp hardly works.
Signed-off-by: Sangwook Leesangwook.lee@linaro.org
arch/arm/mach-exynos/setup-usb-phy.c | 6 ++++++ arch/arm/plat-samsung/devs.c | 2 ++ arch/arm/plat-samsung/include/plat/ehci.h | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 41743d2..5a20460 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -18,6 +18,7 @@ #include<mach/regs-usb-phy.h> #include<plat/cpu.h> #include<plat/usb-phy.h> +#include<plat/ehci.h>
static atomic_t host_usage;
@@ -149,3 +150,8 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL;}
+void s5p_ehci_burst_enable(struct platform_device *pdev, void __iomem *base) +{
writel(EHCI_INSNREG00_ENABLE_BURST, base + EHCI_INSNREG00);+}
This functionality can be added in ehci-s5p itself and avoid adding a new platform callback in platform data. If this is specific to exynos, driver data could be added in ehci-s5p to indicate platforms that need this to be enabled.
it makes sense.
Thanks, Thomas.
[...]
On 02/29/2012 06:31 PM, Thomas Abraham wrote:
Hi Sangwook,
On 29 February 2012 18:11, Sangwook Lee sangwook.lee@linaro.org wrote:
Enable burst transfer from AHB for EHCI. This fixes data transfer of USB Ethernet with EHCI. Without this patch, scp hardly works.
Signed-off-by: Sangwook Lee sangwook.lee@linaro.org
arch/arm/mach-exynos/setup-usb-phy.c | 6 ++++++ arch/arm/plat-samsung/devs.c | 2 ++ arch/arm/plat-samsung/include/plat/ehci.h | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 41743d2..5a20460 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -18,6 +18,7 @@ #include <mach/regs-usb-phy.h> #include <plat/cpu.h> #include <plat/usb-phy.h> +#include <plat/ehci.h>
static atomic_t host_usage;
@@ -149,3 +150,8 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL;}
+void s5p_ehci_burst_enable(struct platform_device *pdev, void __iomem *base) +{
writel(EHCI_INSNREG00_ENABLE_BURST, base + EHCI_INSNREG00);+}
This functionality can be added in ehci-s5p itself and avoid adding a new platform callback in platform data. If this is specific to exynos, driver data could be added in ehci-s5p to indicate platforms that need this to be enabled.
Am I right in assuming that ehci-s5p driver can also be used for mach-s5pv210?
The related bit-fields are reserved in S5PV210. So, won't it cause any side-effects?
Thanks, Thomas.
[...]
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 1 March 2012 03:24, Tushar Behera tushar.behera@linaro.org wrote:
On 02/29/2012 06:31 PM, Thomas Abraham wrote:
Hi Sangwook,
On 29 February 2012 18:11, Sangwook Lee sangwook.lee@linaro.org wrote:
Enable burst transfer from AHB for EHCI. This fixes data transfer of USB Ethernet with EHCI. Without this patch, scp hardly works.
Signed-off-by: Sangwook Lee sangwook.lee@linaro.org
arch/arm/mach-exynos/setup-usb-phy.c | 6 ++++++ arch/arm/plat-samsung/devs.c | 2 ++ arch/arm/plat-samsung/include/plat/ehci.h | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c
b/arch/arm/mach-exynos/setup-usb-phy.c
index 41743d2..5a20460 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -18,6 +18,7 @@ #include <mach/regs-usb-phy.h> #include <plat/cpu.h> #include <plat/usb-phy.h> +#include <plat/ehci.h>
static atomic_t host_usage;
@@ -149,3 +150,8 @@ int s5p_usb_phy_exit(struct platform_device *pdev,
int type)
return -EINVAL;}
+void s5p_ehci_burst_enable(struct platform_device *pdev, void __iomem
*base)
+{
writel(EHCI_INSNREG00_ENABLE_BURST, base + EHCI_INSNREG00);+}
This functionality can be added in ehci-s5p itself and avoid adding a new platform callback in platform data. If this is specific to exynos, driver data could be added in ehci-s5p to indicate platforms that need this to be enabled.
Am I right in assuming that ehci-s5p driver can also be used for mach-s5pv210?
The related bit-fields are reserved in S5PV210. So, won't it cause any side-effects?
do we use ehci-s5p.c in CPU 64xx series ?
Thanks, Thomas.
[...]
To unsubscribe from this list: send the line "unsubscribe
linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
-- Tushar Behera
Hi, Sangwook.
I know what you want to add. I'll send new patch which can enable EHCI burst mode. This new patch will not use platform data callback and different machine directory file to include EHCI INSNREG00 definitions. Also, comment will be modified properly.
Thank you.
Best regards, Jingoo Han.
-----Original Message----- From: Sangwook Lee [mailto:sangwook.lee@linaro.org] Sent: Wednesday, February 29, 2012 9:41 PM To: linux-samsung-soc@vger.kernel.org; linux-usb@vger.kernel.org; linux-arm-kernel@lists.infradead.org Cc: ben-linux@fluff.org; gregkh@suse.de; kgene.kim@samsung.com; stern@rowland.harvard.edu; jg1.han@samsung.com; jy0922.shim@samsung.com; patches@linaro.org; linaro-dev@lists.linaro.org; linux@arm.linux.org.uk; Sangwook Lee Subject: [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function
Enable burst transfer from AHB for EHCI. This fixes data transfer of USB Ethernet with EHCI. Without this patch, scp hardly works.
Signed-off-by: Sangwook Lee sangwook.lee@linaro.org
arch/arm/mach-exynos/setup-usb-phy.c | 6 ++++++ arch/arm/plat-samsung/devs.c | 2 ++ arch/arm/plat-samsung/include/plat/ehci.h | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 41743d2..5a20460 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -18,6 +18,7 @@ #include <mach/regs-usb-phy.h> #include <plat/cpu.h> #include <plat/usb-phy.h> +#include <plat/ehci.h>
static atomic_t host_usage;
@@ -149,3 +150,8 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL; }
+void s5p_ehci_burst_enable(struct platform_device *pdev, void __iomem *base) +{
- writel(EHCI_INSNREG00_ENABLE_BURST, base + EHCI_INSNREG00);
+} diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index f10768e..8fd1bd3 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1402,6 +1402,8 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) npd->phy_init = s5p_usb_phy_init; if (!npd->phy_exit) npd->phy_exit = s5p_usb_phy_exit;
- if (!npd->burst_enable)
npd->burst_enable = s5p_ehci_burst_enable;} #endif /* CONFIG_S5P_DEV_USB_EHCI */
diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h index 5f28cae..9c866b7 100644 --- a/arch/arm/plat-samsung/include/plat/ehci.h +++ b/arch/arm/plat-samsung/include/plat/ehci.h @@ -14,8 +14,27 @@ struct s5p_ehci_platdata { int (*phy_init)(struct platform_device *pdev, int type); int (*phy_exit)(struct platform_device *pdev, int type);
- void (*burst_enable)(struct platform_device *pdev, void __iomem *base);
};
extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); +extern void s5p_ehci_burst_enable(struct platform_device *pdev,
- void __iomem *base);
+/* EHCI EXYNOS specific register */ +#define EHCI_INSNREG00 0x90
+/*
- EHCI INSNREG00 Specific fields
- Enable AHB master to use burst transfer from 4 to 16
- */
+#define EHCI_INSNREG00_ENABLE_INCR16 (1 << 25) +#define EHCI_INSNREG00_ENABLE_INCR8 (1 << 24) +#define EHCI_INSNREG00_ENABLE_INCR4 (1 << 23) +/* Force AHB master to start burst transfer only for 4,8,16 alignment */ +#define EHCI_INSNREG00_ENABLE_INCRX_ALIGN (1 << 22) +#define EHCI_INSNREG00_ENABLE_BURST \
- (EHCI_INSNREG00_ENABLE_INCR16 | EHCI_INSNREG00_ENABLE_INCR8 | \
- EHCI_INSNREG00_ENABLE_INCR4 | EHCI_INSNREG00_ENABLE_INCRX_ALIGN)
#endif /* __PLAT_SAMSUNG_EHCI_H */
1.7.4.1
Hi Jingoo
On 29/02/12 13:23, Jingoo Han wrote:
Hi, Sangwook.
I know what you want to add. I'll send new patch which can enable EHCI burst mode.
Great !
Thanks Sangwook
This new patch will not use platform data callback and different machine directory file to include EHCI INSNREG00 definitions. Also, comment will be modified properly.
Thank you.
Best regards, Jingoo Han.
-----Original Message----- From: Sangwook Lee [mailto:sangwook.lee@linaro.org] Sent: Wednesday, February 29, 2012 9:41 PM To: linux-samsung-soc@vger.kernel.org; linux-usb@vger.kernel.org; linux-arm-kernel@lists.infradead.org Cc: ben-linux@fluff.org; gregkh@suse.de; kgene.kim@samsung.com; stern@rowland.harvard.edu; jg1.han@samsung.com; jy0922.shim@samsung.com; patches@linaro.org; linaro-dev@lists.linaro.org; linux@arm.linux.org.uk; Sangwook Lee Subject: [PATCH 1/2] ARM: EXYNOS: Add EHCI AHB burst function
Enable burst transfer from AHB for EHCI. This fixes data transfer of USB Ethernet with EHCI. Without this patch, scp hardly works.
Signed-off-by: Sangwook Leesangwook.lee@linaro.org
arch/arm/mach-exynos/setup-usb-phy.c | 6 ++++++ arch/arm/plat-samsung/devs.c | 2 ++ arch/arm/plat-samsung/include/plat/ehci.h | 19 +++++++++++++++++++ 3 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 41743d2..5a20460 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -18,6 +18,7 @@ #include<mach/regs-usb-phy.h> #include<plat/cpu.h> #include<plat/usb-phy.h> +#include<plat/ehci.h>
static atomic_t host_usage;
@@ -149,3 +150,8 @@ int s5p_usb_phy_exit(struct platform_device *pdev, int type)
return -EINVAL; }
+void s5p_ehci_burst_enable(struct platform_device *pdev, void __iomem *base) +{
- writel(EHCI_INSNREG00_ENABLE_BURST, base + EHCI_INSNREG00);
+} diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index f10768e..8fd1bd3 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1402,6 +1402,8 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) npd->phy_init = s5p_usb_phy_init; if (!npd->phy_exit) npd->phy_exit = s5p_usb_phy_exit;
- if (!npd->burst_enable)
npd->burst_enable = s5p_ehci_burst_enable;diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h index 5f28cae..9c866b7 100644 --- a/arch/arm/plat-samsung/include/plat/ehci.h +++ b/arch/arm/plat-samsung/include/plat/ehci.h @@ -14,8 +14,27 @@ struct s5p_ehci_platdata { int (*phy_init)(struct platform_device *pdev, int type); int (*phy_exit)(struct platform_device *pdev, int type);
void (*burst_enable)(struct platform_device *pdev, void __iomem *base); };
extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
+extern void s5p_ehci_burst_enable(struct platform_device *pdev,
- void __iomem *base);
+/* EHCI EXYNOS specific register */ +#define EHCI_INSNREG00 0x90
+/*
- EHCI INSNREG00 Specific fields
- Enable AHB master to use burst transfer from 4 to 16
- */
+#define EHCI_INSNREG00_ENABLE_INCR16 (1<< 25) +#define EHCI_INSNREG00_ENABLE_INCR8 (1<< 24) +#define EHCI_INSNREG00_ENABLE_INCR4 (1<< 23) +/* Force AHB master to start burst transfer only for 4,8,16 alignment */ +#define EHCI_INSNREG00_ENABLE_INCRX_ALIGN (1<< 22) +#define EHCI_INSNREG00_ENABLE_BURST \
(EHCI_INSNREG00_ENABLE_INCR16 | EHCI_INSNREG00_ENABLE_INCR8 | \
EHCI_INSNREG00_ENABLE_INCR4 | EHCI_INSNREG00_ENABLE_INCRX_ALIGN)
#endif /* __PLAT_SAMSUNG_EHCI_H */
-- 1.7.4.1
Add platform specific function for EHCI burst function
Signed-off-by: Sangwook Lee sangwook.lee@linaro.org --- drivers/usb/host/ehci-s5p.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 293f741..c5eb0ce 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -134,6 +134,9 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) /* cache this readonly data; minimize chip reads */ ehci->hcs_params = readl(&ehci->caps->hcs_params);
+ if (pdata->burst_enable) + pdata->burst_enable(pdev, hcd->regs); + ehci_reset(ehci);
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
-
Jingoo Han -
Sangwook Lee -
Thomas Abraham -
Tushar Behera