Bugs report for Freescale i.MX53 Loco board run Android and Ubuntu with Linaro 11.12&12.01
Dear Linaro Dev Team, Thanks a lot for your kindly and attentions, firstly! i test the Linaro Version 11.12&12.01 for MX53 Loco board this two months in Shenzhen, China. Bug 1: Boot Time too long, it needs 1 minutes past 53 seconds for Ubuntu on Linaro Version 11.12&12.01. and Android 4.0.1 and 4.0.3 boot time needs 2 minutes past 55 seconds. Bug 2: Android Launcher no response and unlock. Bug 3: HDMI sound interrupt. Bug 4: HDMI Display not fine and some noise signal on the monitor with Ubuntu 11.10 over Linaro 12.01.
Thanks again! --------------------------------------------------------------------------------
If you have any question or requirement please feel free to contact me. Keep in touch. Thanks for your co-operations! 有任何疑问和问题，请及时跟宋超联系，谢谢支持！ 顺祝商祺 ! Best Regards! 宋超 Steven Song
Tel:+86 755 86,638,386;86,638,396 +86 755 86,0298,880;86,639,890 Ext 816 Fax:+86 755 86,029,992 Mobile:+86 13,682,508,330 Email: orientsusong@126.com orientsusong@gmail.com MSN: orientsusong@hotmail.com QQ:472716555 Skype: orientsusong 深圳市海泰信科技发展有限公司 Shenzhen Hithing Technology Development Co., Ltd. Website: http://www.hithing.com/index.asp 中国深圳南山科技园南区长虹科技大厦 1301 室 518057 Rm1301, 13F,Changhong Technology Bldg.,South Block, Hi-Tech Park,Nanshan Dist.,Shenzhen 518057,P.R.China
*************************************************************************************** The information in this email is confidential and may be legally privileged. Access to this email by anyone other than the intended addressee is unauthorized. If you are not the intended recipient of this message, any review, disclosure, copying, distribution, retention, or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful. If you are not the intended recipient, please reply to or forward a copy of this message to the sender and delete the message, any attachments, and any copies thereof from your system. ****************************************************************************************
宋超，你好
2012/2/1 orientsusong orientsusong@126.com:
Dear Linaro Dev Team, Thanks a lot for your kindly and attentions, firstly! i test the Linaro Version 11.12&12.01 for MX53 Loco board this two months in Shenzhen, China. Bug 1: Boot Time too long, it needs 1 minutes past 53 seconds for Ubuntu on Linaro Version 11.12&12.01. and Android 4.0.1 and 4.0.3 boot time needs 2 minutes past 55 seconds.
Yes, we already working on those bootup time issues.
Bug 2: Android Launcher no response and unlock.
It's very like an Android specific bug, which caused by not recognized any HID device from USB.
Bug 3: HDMI sound interrupt. Bug 4: HDMI Display not fine and some noise signal on the monitor with Ubuntu 11.10 over Linaro 12.01.
For enable HDMI display, you will need to modify your u-boot parameter manually, and for audio output from HDMI, we only supported for limited device. So please let me know what kind of display you'd like to test with.
Thanks,
Haitao
2012/2/1 Haitao Zhang haitao.zhang@linaro.org:
宋超，你好
2012/2/1 orientsusong orientsusong@126.com:
Dear Linaro Dev Team, Thanks a lot for your kindly and attentions, firstly! i test the Linaro Version 11.12&12.01 for MX53 Loco board this two months in Shenzhen, China. Bug 1: Boot Time too long, it needs 1 minutes past 53 seconds for Ubuntu on Linaro Version 11.12&12.01. and Android 4.0.1 and 4.0.3 boot time needs 2 minutes past 55 seconds.
Yes, we already working on those bootup time issues.
That's interesting, Android taking more time to boot than Ubuntu.
Does this boot means having something available at the UI level, or having the system useful for the users?
Bug 3: HDMI sound interrupt. Bug 4: HDMI Display not fine and some noise signal on the monitor with Ubuntu 11.10 over Linaro 12.01.
For enable HDMI display, you will need to modify your u-boot parameter manually, and for audio output from HDMI, we only supported for limited device. So please let me know what kind of display you'd like to test with.
I don't remember having to set up the u-boot env manually to make it to work with HDMI (at least with Ubuntu). If this is still an issue, is it also happening with latest upstream? Don't see it'd be too hard to probe and enable the display at runtime.
Cheers,
Dear Ricardo and Haitao, Attached doc is uart debug message on Android 4.0.3 and Ubuntu 11.10 with Linaro 12.01 .
Bug 1: Boot Time too long on Android 4.0.3. mark this debug message:
[ 6.873667] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' root@android:/ # [ 7.470247] warning: `rild' uses 32-bit capabilities (legacy support in use) [ 122.108733] request_suspend_state: wakeup (3->0) at 122073838376 (1970-01-02 00:00:22.864399250 UTC) [ 126.615440] init: no such service 'dhcpcd_sit0' [ 131.636906] init: no such service 'dhcpcd_sit0:-h android-3352a2fd01e14fc3 sit0' [ 152.076611] binder: release 1119:1126 transaction 7671 out, still active [ 152.230535] binder: 1059:1120 transaction failed 29189, size 8-0 [ 152.287262] binder: send failed reply for transaction 7671, target dead [ 173.146847] binder: release 1224:1387 transaction 8425 out, still active [ 183.400659] binder: 1309:1323 transaction failed 29189, size 32-4 [ 183.505067] binder: send failed reply for transaction 8425, target dead [ 212.194208] request_suspend_state: sleep (0->3) at 212159313751 (1970-01-02 00:01:52.949874750 UTC)
Best Regards!
Steven Song
2012-02-02 PM 16:51
From: Ricardo Salveti Date: 2012-02-02 09:36 To: Haitao Zhang CC: orientsusong; orientsusong; linaro-dev Subject: Re: Bugs report for Freescale i.MX53 Loco board run Android and Ubuntu with Linaro 11.12&12.01 2012/2/1 Haitao Zhang haitao.zhang@linaro.org:
宋超，你好
2012/2/1 orientsusong orientsusong@126.com:
Dear Linaro Dev Team, Thanks a lot for your kindly and attentions, firstly! i test the Linaro Version 11.12&12.01 for MX53 Loco board this two months in Shenzhen, China. Bug 1: Boot Time too long, it needs 1 minutes past 53 seconds for Ubuntu on Linaro Version 11.12&12.01. and Android 4.0.1 and 4.0.3 boot time needs 2 minutes past 55 seconds.
Yes, we already working on those bootup time issues.
That's interesting, Android taking more time to boot than Ubuntu.
Does this boot means having something available at the UI level, or having the system useful for the users?
Bug 3: HDMI sound interrupt. Bug 4: HDMI Display not fine and some noise signal on the monitor with Ubuntu 11.10 over Linaro 12.01.
For enable HDMI display, you will need to modify your u-boot parameter manually, and for audio output from HDMI, we only supported for limited device. So please let me know what kind of display you'd like to test with.
I don't remember having to set up the u-boot env manually to make it to work with HDMI (at least with Ubuntu). If this is still an issue, is it also happening with latest upstream? Don't see it'd be too hard to probe and enable the display at runtime.
Cheers,
Dear Ricardo and Haitao,
Bug 3: HDMI sound interrupt. Bug 4: HDMI Display not fine and some noise signal on the monitor with Ubuntu 11.10 over Linaro 12.01.
For enable HDMI display, you will need to modify your u-boot parameter manually, and for audio output from HDMI, we only supported for limited device. So please let me know what kind of display you'd like to test with.
~~Here're the HDMI monitor(tv) models: ~~1、Philips MWT1220T ~~2、ViewSonic VX2433WM-CN ~~3、TCL 4211CDS
Best Regards!
Steven Song 2012-02-03 AM 09:36
From: Ricardo Salveti Date: 2012-02-02 09:36 To: Haitao Zhang CC: orientsusong; orientsusong; linaro-dev Subject: Re: Bugs report for Freescale i.MX53 Loco board run Android and Ubuntu with Linaro 11.12&12.01 2012/2/1 Haitao Zhang haitao.zhang@linaro.org:
宋超，你好
2012/2/1 orientsusong orientsusong@126.com:
Dear Linaro Dev Team, Thanks a lot for your kindly and attentions, firstly! i test the Linaro Version 11.12&12.01 for MX53 Loco board this two months in Shenzhen, China. Bug 1: Boot Time too long, it needs 1 minutes past 53 seconds for Ubuntu on Linaro Version 11.12&12.01. and Android 4.0.1 and 4.0.3 boot time needs 2 minutes past 55 seconds.
Yes, we already working on those bootup time issues.
That's interesting, Android taking more time to boot than Ubuntu.
Does this boot means having something available at the UI level, or having the system useful for the users?
Bug 3: HDMI sound interrupt. Bug 4: HDMI Display not fine and some noise signal on the monitor with Ubuntu 11.10 over Linaro 12.01.
For enable HDMI display, you will need to modify your u-boot parameter manually, and for audio output from HDMI, we only supported for limited device. So please let me know what kind of display you'd like to test with.
I don't remember having to set up the u-boot env manually to make it to work with HDMI (at least with Ubuntu). If this is still an issue, is it also happening with latest upstream? Don't see it'd be too hard to probe and enable the display at runtime.
Cheers,
-
Haitao Zhang -
orientsusong -
orientsusong -
Ricardo Salveti