Linaro 13.01 Release (Calendar Week 5, 2013): Here is test result summary for Linux Linaro ubuntu Quantal image on following boards:
1) ARM Versatile Express A9; 2) Samsung Origen; 3) Samsung Arndale; 4) TI Panda 4430; 5) TI Panda 4460; 6) ST Ericsson Snowball.
Synopsis: Samsung Arndale board bringing up, booted successfully; ARM DS-5 data streaming doesn't work on TI Panda boards; Ethernet starts to work on Samsung Origen by manually modify configuration file.
1. ARM Versatile Express A9 + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdFNmV3...
It keeps exactly same status as last test result: only "Halt" & "Device Tree" test failed, all other features work well, and kernel has been upgraded to 3.8.0-1.
2. Samsung Origen + Linux Linaro Quantal (Column J):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEowNW...
"Halt" test failed, but it worked well last week. Ethernet starts to work by modify "/etc/network/interfaces" manually then reboot. Device Tree backs to work and Segmentation Fault error has been fixed in PowerTop. WiFi is still unavailable.
3. Samsung Arndale + Linux Linaro Quantal (Column C):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AgB-fT5LL31CdGZJSF...
New board, Samsung Arndale has been brought up and booted successfully, although not reliable enough.
4. TI Panda 4430 + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEwwZk...
ARM DS5 data streaming failed due to gator version mismatch, Device Tree is unavailable. "cpuhotplug_07" in Power Management test failed again but it worked well last week.
5. TI Panda 4460 + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEwwZk...
ARM DS5 data streaming failed due to gator version mismatch, Device Tree is unavailable, all other test passed.
6. ST Ericsson Snowball + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdFJ4X0...
It keeps exactly same status as last week, board can boot into serial console successfully, but many features are unavailable, like HDMI, reboot, halt and Ethernet.
For the previous week test summary (Calendar week 4), please refer to attachment.
Thank you.
Best Regards Botao Sun
Hi Botao,
On 31 January 2013 10:58, Botao Sun botao.sun@linaro.org wrote:
Linaro 13.01 Release (Calendar Week 5, 2013): Here is test result summary for Linux Linaro ubuntu Quantal image on following boards:
- ARM Versatile Express A9;
- Samsung Origen;
- Samsung Arndale;
- TI Panda 4430;
- TI Panda 4460;
- ST Ericsson Snowball.
Synopsis: Samsung Arndale board bringing up, booted successfully; ARM DS-5 data streaming doesn't work on TI Panda boards; Ethernet starts to work on Samsung Origen by manually modify configuration file.
- ARM Versatile Express A9 + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdFNmV3...
It keeps exactly same status as last test result: only "Halt" & "Device Tree" test failed, all other features work well, and kernel has been upgraded to 3.8.0-1.
- Samsung Origen + Linux Linaro Quantal (Column J):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEowNW...
"Halt" test failed, but it worked well last week. Ethernet starts to work by modify "/etc/network/interfaces" manually then reboot. Device Tree backs to work and Segmentation Fault error has been fixed in PowerTop. WiFi is still unavailable.
The ethernet behavior is expected. It isn't enabled by default as the board doesn't have ethernet onboard.
- Samsung Arndale + Linux Linaro Quantal (Column C):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AgB-fT5LL31CdGZJSF...
New board, Samsung Arndale has been brought up and booted successfully, although not reliable enough.
- TI Panda 4430 + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEwwZk...
ARM DS5 data streaming failed due to gator version mismatch, Device Tree is unavailable. "cpuhotplug_07" in Power Management test failed again but it worked well last week.
- TI Panda 4460 + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEwwZk...
ARM DS5 data streaming failed due to gator version mismatch, Device Tree is unavailable, all other test passed.
Gator has been updated. It should be fixed in latest image.
- ST Ericsson Snowball + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdFJ4X0...
It keeps exactly same status as last week, board can boot into serial console successfully, but many features are unavailable, like HDMI, reboot, halt and Ethernet.
Ethernet has been fixed and should work. Could you make sure you're using linux-linaro 3.8-rc4 and device?
For the previous week test summary (Calendar week 4), please refer to attachment.
Thank you.
Best Regards Botao Sun
linaro-release mailing list linaro-release@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-release
Hi Fathi,
This report is just for the release images, not for the latest ones. For TI Panda board, it means the test result is for build 58. I will test the DS5 in our next weekly test cycle for new Panda images.
For STE Snowball, the release image is build 58, which contains kernel 3.8.0-1, and the output of "ifconfig -a" is:
root@localhost:~# ifconfig -a lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:18 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1380 (1.3 KB) TX bytes:1380 (1.3 KB)
root@localhost:~#
Thanks.
Best Regards Botao Sun
On Thu, Jan 31, 2013 at 8:07 PM, Fathi Boudra fathi.boudra@linaro.orgwrote:
Hi Botao,
On 31 January 2013 10:58, Botao Sun botao.sun@linaro.org wrote:
Linaro 13.01 Release (Calendar Week 5, 2013): Here is test result summary for Linux Linaro ubuntu Quantal image on following boards:
- ARM Versatile Express A9;
- Samsung Origen;
- Samsung Arndale;
- TI Panda 4430;
- TI Panda 4460;
- ST Ericsson Snowball.
Synopsis: Samsung Arndale board bringing up, booted successfully; ARM
DS-5
data streaming doesn't work on TI Panda boards; Ethernet starts to work
on
Samsung Origen by manually modify configuration file.
- ARM Versatile Express A9 + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdFNmV3...
It keeps exactly same status as last test result: only "Halt" & "Device Tree" test failed, all other features work well, and kernel has been upgraded to 3.8.0-1.
- Samsung Origen + Linux Linaro Quantal (Column J):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEowNW...
"Halt" test failed, but it worked well last week. Ethernet starts to
work by
modify "/etc/network/interfaces" manually then reboot. Device Tree backs
to
work and Segmentation Fault error has been fixed in PowerTop. WiFi is
still
unavailable.
The ethernet behavior is expected. It isn't enabled by default as the board doesn't have ethernet onboard.
- Samsung Arndale + Linux Linaro Quantal (Column C):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AgB-fT5LL31CdGZJSF...
New board, Samsung Arndale has been brought up and booted successfully, although not reliable enough.
- TI Panda 4430 + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEwwZk...
ARM DS5 data streaming failed due to gator version mismatch, Device Tree
is
unavailable. "cpuhotplug_07" in Power Management test failed again but it worked well last week.
- TI Panda 4460 + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEwwZk...
ARM DS5 data streaming failed due to gator version mismatch, Device Tree
is
unavailable, all other test passed.
Gator has been updated. It should be fixed in latest image.
- ST Ericsson Snowball + Linux Linaro Quantal (Column I):
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdFJ4X0...
It keeps exactly same status as last week, board can boot into serial console successfully, but many features are unavailable, like HDMI,
reboot,
halt and Ethernet.
Ethernet has been fixed and should work. Could you make sure you're using linux-linaro 3.8-rc4 and device?
For the previous week test summary (Calendar week 4), please refer to attachment.
Thank you.
Best Regards Botao Sun
linaro-release mailing list linaro-release@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-release
-- Fathi Boudra Release Manager | Developer Platform Tech Lead Linaro.org | Open source software for ARM SoCs
-
Botao Sun -
Fathi Boudra