[linux-pm][RFC PATCH] thermal: Add support to report cooling statistics achieved by cooling devices
Add a sysfs node code to report effective cooling of all cooling devices attached to each trip points of a thermal zone. The cooling data reported will be absolute if the higher temperature trip points are arranged first otherwise the cooling stats is the cumulative effect of the earlier invoked cooling handlers.
The basic assumption is that cooling devices will bring down the temperature in a symmetric manner and those statistics can be stored back and used for further tuning of the system.
Signed-off-by: Amit Daniel Kachhap amit.kachhap@linaro.org --- Documentation/thermal/sysfs-api.txt | 10 ++++ drivers/thermal/thermal_sys.c | 96 +++++++++++++++++++++++++++++++++++ include/linux/thermal.h | 8 +++ 3 files changed, 114 insertions(+), 0 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index b61e46f..1db9a9d 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -209,6 +209,13 @@ passive Valid values: 0 (disabled) or greater than 1000 RW, Optional
+trip_stats + This attribute presents the effective cooling generated from all the + cooling devices attached to a trip point. The output is a pair of value + for each trip point. Each pair represents + (trip index, cooling temperature difference in millidegree Celsius) + RO, Optional + ***************************** * Cooling device attributes * ***************************** @@ -261,6 +268,9 @@ method, the sys I/F structure will be built like this: |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ |---cdev1: --->/sys/class/thermal/cooling_device3 |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ + |---trip_stats 0 0 + 1 8000 /*trip 1 causes 8 degree Celsius drop*/ + 2 3000 /*trip 2 causes 3 degree Celsius drop*/
|cooling_device0: |---type: Processor diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index dd9a574..47e7b6e 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -92,6 +92,64 @@ static void release_idr(struct idr *idr, struct mutex *lock, int id) if (lock) mutex_unlock(lock); } +static void update_cooling_stats(struct thermal_zone_device *tz, long cur_temp) +{ + int count, max_index, cur_interval; + long trip_temp, max_temp = 0, cool_temp; + static int last_trip_level = -1; + + if (cur_temp >= tz->last_temperature) + return; + + /* find the trip according to last temperature */ + for (count = 0; count < tz->trips; count++) { + tz->ops->get_trip_temp(tz, count, &trip_temp); + if (tz->last_temperature >= trip_temp) { + if (max_temp < trip_temp) { + max_temp = trip_temp; + max_index = count; + } + } + } + + if (!max_temp) { + last_trip_level = -1; + return; + } + + cur_interval = tz->stat[max_index].interval_ptr; + cool_temp = tz->last_temperature - cur_temp; + + if (last_trip_level != max_index) { + if (++cur_interval == INTERVAL_HISTORY) + cur_interval = 0; + tz->stat[max_index].cool_temp[cur_interval] = cool_temp; + tz->stat[max_index].interval_ptr = cur_interval; + last_trip_level = max_index; + } else { + tz->stat[max_index].cool_temp[cur_interval] += cool_temp; + } +} + +static int calculate_cooling_temp_avg(struct thermal_zone_device *tz, int trip, + int *avg_cool) +{ + int result = 0, count = 0, used_data = 0; + + if (trip > THERMAL_MAX_TRIPS) + return -EINVAL; + + *avg_cool = 0; + for (count = 0; count < INTERVAL_HISTORY; count++) { + if (tz->stat[trip].cool_temp[count] > 0) { + *avg_cool += tz->stat[trip].cool_temp[count]; + used_data++; + } + } + if (used_data > 1) + *avg_cool = (*avg_cool)/used_data; + return result; +}
/* sys I/F for thermal zone */
@@ -493,6 +551,26 @@ temp_crit_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%ld\n", temperature); }
+static ssize_t +thermal_cooling_trip_stats_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int avg_cool = 0, result, trip_index; + ssize_t len = 0; + + for (trip_index = 0; trip_index < tz->trips; trip_index++) { + result = calculate_cooling_temp_avg(tz, + trip_index, &avg_cool); + if (!result) + len += sprintf(buf + len, "%d %d\n", + trip_index, avg_cool); + } + return len; +} +static DEVICE_ATTR(trip_stats, 0444, + thermal_cooling_trip_stats_show, NULL);
static struct thermal_hwmon_device * thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz) @@ -1049,6 +1127,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) goto leave; }
+ update_cooling_stats(tz, temp); + for (count = 0; count < tz->trips; count++) { tz->ops->get_trip_type(tz, count, &trip_type); tz->ops->get_trip_temp(tz, count, &trip_temp); @@ -1181,6 +1261,13 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, return ERR_PTR(result); }
+ /*Allocate variables for cooling stats*/ + tz->stat = devm_kzalloc(&tz->device, + sizeof(struct thermal_cooling_stats) * trips, + GFP_KERNEL); + if (!tz->stat) + goto unregister; + /* sys I/F */ if (type) { result = device_create_file(&tz->device, &dev_attr_type); @@ -1207,6 +1294,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, passive = 1; }
+ if (trips > 0) { + result = device_create_file(&tz->device, &dev_attr_trip_stats); + if (result) + goto unregister; + } + if (!passive) result = device_create_file(&tz->device, &dev_attr_passive); @@ -1282,6 +1375,9 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) for (count = 0; count < tz->trips; count++) TRIP_POINT_ATTR_REMOVE(&tz->device, count);
+ if (tz->trips > 0) + device_remove_file(&tz->device, &dev_attr_trip_stats); + thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); idr_destroy(&tz->idr); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 47b4a27..47504c7 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -72,6 +72,13 @@ struct thermal_cooling_device_ops { #define THERMAL_TRIPS_NONE -1 #define THERMAL_MAX_TRIPS 12 #define THERMAL_NAME_LENGTH 20 +#define INTERVAL_HISTORY 12 + +struct thermal_cooling_stats { + int cool_temp[INTERVAL_HISTORY]; + int interval_ptr; +}; + struct thermal_cooling_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -102,6 +109,7 @@ struct thermal_zone_device { struct list_head cooling_devices; struct idr idr; struct mutex lock; /* protect cooling devices list */ + struct thermal_cooling_stats *stat; struct list_head node; struct delayed_work poll_queue; };
Hi!
Add a sysfs node code to report effective cooling of all cooling devices attached to each trip points of a thermal zone. The cooling data reported will be absolute if the higher temperature trip points are arranged first otherwise the cooling stats is the cumulative effect of the earlier invoked cooling handlers.
The basic assumption is that cooling devices will bring down the temperature in a symmetric manner and those statistics can be stored back and used for further tuning of the system.
/sys fs should be one-value-per-file, talk to gregkh.
On Mon, Feb 06, 2012 at 05:56:58PM +0100, Pavel Machek wrote:
Hi!
Add a sysfs node code to report effective cooling of all cooling devices attached to each trip points of a thermal zone. The cooling data reported will be absolute if the higher temperature trip points are arranged first otherwise the cooling stats is the cumulative effect of the earlier invoked cooling handlers.
The basic assumption is that cooling devices will bring down the temperature in a symmetric manner and those statistics can be stored back and used for further tuning of the system.
/sys fs should be one-value-per-file, talk to gregkh.
That's correct.
Why not use debugfs for this instead?
thanks,
greg k-h
On 6 February 2012 09:03, Greg KH greg@kroah.com wrote:
On Mon, Feb 06, 2012 at 05:56:58PM +0100, Pavel Machek wrote:
Hi!
Add a sysfs node code to report effective cooling of all cooling devices attached to each trip points of a thermal zone. The cooling data reported will be absolute if the higher temperature trip points are arranged first otherwise the cooling stats is the cumulative effect of the earlier invoked cooling handlers.
The basic assumption is that cooling devices will bring down the temperature in a symmetric manner and those statistics can be stored back and used for further tuning of the system.
/sys fs should be one-value-per-file, talk to gregkh.
That's correct.
Why not use debugfs for this instead?
thanks,
greg k-h
Thanks Greg/Pavel for looking into the patch. Basically I checked the places where single sysfs entry is showing more then 1 output. And 1) /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state 2) /sys/devices/system/cpu/cpu0/cpufreq/stats/trans_table are the places where the output is more than 1 value.
Anyway I can enclose this sysfs inside CONFIG_THERMAL_COOLING_STATS macro.
Thanks, Amit Daniel
On Mon, Feb 06, 2012 at 03:16:17PM -0800, Amit Kachhap wrote:
On 6 February 2012 09:03, Greg KH greg@kroah.com wrote:
On Mon, Feb 06, 2012 at 05:56:58PM +0100, Pavel Machek wrote:
Hi!
Add a sysfs node code to report effective cooling of all cooling devices attached to each trip points of a thermal zone. The cooling data reported will be absolute if the higher temperature trip points are arranged first otherwise the cooling stats is the cumulative effect of the earlier invoked cooling handlers.
The basic assumption is that cooling devices will bring down the temperature in a symmetric manner and those statistics can be stored back and used for further tuning of the system.
/sys fs should be one-value-per-file, talk to gregkh.
That's correct.
Why not use debugfs for this instead?
thanks,
greg k-h
Thanks Greg/Pavel for looking into the patch. Basically I checked the places where single sysfs entry is showing more then 1 output. And
- /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state
- /sys/devices/system/cpu/cpu0/cpufreq/stats/trans_table
are the places where the output is more than 1 value.
Yes, those are two known-bad files, whose files will change soon and move to debugfs.
Just because you found 2, instead of the thousands of other properly formatted files, does not mean you are allowed to create something like this.
Anyway I can enclose this sysfs inside CONFIG_THERMAL_COOLING_STATS macro.
No, you can not create it at all in sysfs, if you really need such a large single file, use debugfs instead, that is what it is there for.
Again, one-value-per-file is the sysfs rule, and has been for a decade now, please don't think this is a new thing.
greg k-h
On 6 February 2012 16:18, Greg KH greg@kroah.com wrote:
On Mon, Feb 06, 2012 at 03:16:17PM -0800, Amit Kachhap wrote:
On 6 February 2012 09:03, Greg KH greg@kroah.com wrote:
On Mon, Feb 06, 2012 at 05:56:58PM +0100, Pavel Machek wrote:
Hi!
Add a sysfs node code to report effective cooling of all cooling devices attached to each trip points of a thermal zone. The cooling data reported will be absolute if the higher temperature trip points are arranged first otherwise the cooling stats is the cumulative effect of the earlier invoked cooling handlers.
The basic assumption is that cooling devices will bring down the temperature in a symmetric manner and those statistics can be stored back and used for further tuning of the system.
/sys fs should be one-value-per-file, talk to gregkh.
That's correct.
Why not use debugfs for this instead?
thanks,
greg k-h
Thanks Greg/Pavel for looking into the patch. Basically I checked the places where single sysfs entry is showing more then 1 output. And
- /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state
- /sys/devices/system/cpu/cpu0/cpufreq/stats/trans_table
are the places where the output is more than 1 value.
Yes, those are two known-bad files, whose files will change soon and move to debugfs.
Just because you found 2, instead of the thousands of other properly formatted files, does not mean you are allowed to create something like this.
Anyway I can enclose this sysfs inside CONFIG_THERMAL_COOLING_STATS macro.
No, you can not create it at all in sysfs, if you really need such a large single file, use debugfs instead, that is what it is there for.
Again, one-value-per-file is the sysfs rule, and has been for a decade now, please don't think this is a new thing.
greg k-h
Ok I will follow one-value-per-file rule for sysfs file. Thanks
Hello Amit,
some comments embedded.
On Wed, Jan 18, 2012 at 02:51:07PM +0530, Amit Daniel Kachhap wrote:
Add a sysfs node code to report effective cooling of all cooling devices attached to each trip points of a thermal zone. The cooling data reported will be absolute if the higher temperature trip points are arranged first otherwise the cooling stats is the cumulative effect of the earlier invoked cooling handlers.
The basic assumption is that cooling devices will bring down the temperature in a symmetric manner and those statistics can be stored back and used for further tuning of the system.
Signed-off-by: Amit Daniel Kachhap amit.kachhap@linaro.org
Documentation/thermal/sysfs-api.txt | 10 ++++ drivers/thermal/thermal_sys.c | 96 +++++++++++++++++++++++++++++++++++ include/linux/thermal.h | 8 +++ 3 files changed, 114 insertions(+), 0 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index b61e46f..1db9a9d 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -209,6 +209,13 @@ passive Valid values: 0 (disabled) or greater than 1000 RW, Optional +trip_stats
- This attribute presents the effective cooling generated from all the
- cooling devices attached to a trip point. The output is a pair of value
- for each trip point. Each pair represents
- (trip index, cooling temperature difference in millidegree Celsius)
- RO, Optional
- Cooling device attributes *
@@ -261,6 +268,9 @@ method, the sys I/F structure will be built like this: |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ |---cdev1: --->/sys/class/thermal/cooling_device3 |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
- |---trip_stats 0 0
1 8000 /*trip 1 causes 8 degree Celsius drop*/2 3000 /*trip 2 causes 3 degree Celsius drop*/|cooling_device0: |---type: Processor diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index dd9a574..47e7b6e 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -92,6 +92,64 @@ static void release_idr(struct idr *idr, struct mutex *lock, int id) if (lock) mutex_unlock(lock); } +static void update_cooling_stats(struct thermal_zone_device *tz, long cur_temp) +{
- int count, max_index, cur_interval;
- long trip_temp, max_temp = 0, cool_temp;
- static int last_trip_level = -1;
I got confused here. Are you sure using a static variable here is safe? I suppose this function is called for any thermal_zone_device, which in turns, may have different amount of trips, and different update rate. You may be using last_trip_level as reference for a different tz. Meaning, you would be screwing the stat buffers silently.
If that is the case, I suggest you to move this to your stat structure.
- if (cur_temp >= tz->last_temperature)
return;- /* find the trip according to last temperature */
- for (count = 0; count < tz->trips; count++) {
tz->ops->get_trip_temp(tz, count, &trip_temp);if (tz->last_temperature >= trip_temp) {if (max_temp < trip_temp) {max_temp = trip_temp;max_index = count;}}- }
- if (!max_temp) {
last_trip_level = -1;return;- }
- cur_interval = tz->stat[max_index].interval_ptr;
- cool_temp = tz->last_temperature - cur_temp;
- if (last_trip_level != max_index) {
if (++cur_interval == INTERVAL_HISTORY)cur_interval = 0;tz->stat[max_index].cool_temp[cur_interval] = cool_temp;tz->stat[max_index].interval_ptr = cur_interval;last_trip_level = max_index;- } else {
tz->stat[max_index].cool_temp[cur_interval] += cool_temp;
Why do you need to sum up here? Wouldn't this break your statistics? (I may completely missed your idea for last_trip_level).
- }
+}
+static int calculate_cooling_temp_avg(struct thermal_zone_device *tz, int trip,
int *avg_cool)+{
- int result = 0, count = 0, used_data = 0;
- if (trip > THERMAL_MAX_TRIPS)
Shouldn't this be checked against tz->trips ? At least you allocate your *stat based on it.
return -EINVAL;- *avg_cool = 0;
- for (count = 0; count < INTERVAL_HISTORY; count++) {
if (tz->stat[trip].cool_temp[count] > 0) {*avg_cool += tz->stat[trip].cool_temp[count];used_data++;}- }
- if (used_data > 1)
*avg_cool = (*avg_cool)/used_data;
IIRC, the preferred operator style is (*avg_cool) / used_data
- return result;
result is used only to hold a 0 here?
+} /* sys I/F for thermal zone */ @@ -493,6 +551,26 @@ temp_crit_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%ld\n", temperature); } +static ssize_t +thermal_cooling_trip_stats_show(struct device *dev,
struct device_attribute *attr,char *buf)+{
- struct thermal_zone_device *tz = to_thermal_zone(dev);
- int avg_cool = 0, result, trip_index;
- ssize_t len = 0;
- for (trip_index = 0; trip_index < tz->trips; trip_index++) {
result = calculate_cooling_temp_avg(tz,trip_index, &avg_cool);if (!result)len += sprintf(buf + len, "%d %d\n",trip_index, avg_cool);- }
- return len;
+} +static DEVICE_ATTR(trip_stats, 0444,
thermal_cooling_trip_stats_show, NULL);static struct thermal_hwmon_device * thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz) @@ -1049,6 +1127,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) goto leave; }
- update_cooling_stats(tz, temp);
- for (count = 0; count < tz->trips; count++) { tz->ops->get_trip_type(tz, count, &trip_type); tz->ops->get_trip_temp(tz, count, &trip_temp);
@@ -1181,6 +1261,13 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, return ERR_PTR(result); }
- /*Allocate variables for cooling stats*/
- tz->stat = devm_kzalloc(&tz->device,
sizeof(struct thermal_cooling_stats) * trips,GFP_KERNEL);
You never free this memory here.
- if (!tz->stat)
goto unregister;- /* sys I/F */ if (type) { result = device_create_file(&tz->device, &dev_attr_type);
@@ -1207,6 +1294,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, passive = 1; }
- if (trips > 0) {
result = device_create_file(&tz->device, &dev_attr_trip_stats);if (result)goto unregister;
The failing paths after your allocation point must consider freeing the memory you requested.
- }
- if (!passive) result = device_create_file(&tz->device, &dev_attr_passive);
@@ -1282,6 +1375,9 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) for (count = 0; count < tz->trips; count++) TRIP_POINT_ATTR_REMOVE(&tz->device, count);
- if (tz->trips > 0)
device_remove_file(&tz->device, &dev_attr_trip_stats);
Amit,
I think here it would be a good place to free the memory you allocated for *stat
thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); idr_destroy(&tz->idr); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 47b4a27..47504c7 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -72,6 +72,13 @@ struct thermal_cooling_device_ops { #define THERMAL_TRIPS_NONE -1 #define THERMAL_MAX_TRIPS 12 #define THERMAL_NAME_LENGTH 20 +#define INTERVAL_HISTORY 12
+struct thermal_cooling_stats {
- int cool_temp[INTERVAL_HISTORY];
- int interval_ptr;
+};
struct thermal_cooling_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -102,6 +109,7 @@ struct thermal_zone_device { struct list_head cooling_devices; struct idr idr; struct mutex lock; /* protect cooling devices list */
- struct thermal_cooling_stats *stat; struct list_head node; struct delayed_work poll_queue;
};
1.7.1
linux-pm mailing list linux-pm@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/linux-pm
Hi eduardo,
Thanks for the detail review.
On 6 February 2012 23:09, Eduardo Valentin eduardo.valentin@ti.com wrote:
Hello Amit,
some comments embedded.
On Wed, Jan 18, 2012 at 02:51:07PM +0530, Amit Daniel Kachhap wrote:
Add a sysfs node code to report effective cooling of all cooling devices attached to each trip points of a thermal zone. The cooling data reported will be absolute if the higher temperature trip points are arranged first otherwise the cooling stats is the cumulative effect of the earlier invoked cooling handlers.
The basic assumption is that cooling devices will bring down the temperature in a symmetric manner and those statistics can be stored back and used for further tuning of the system.
Signed-off-by: Amit Daniel Kachhap amit.kachhap@linaro.org
Documentation/thermal/sysfs-api.txt | 10 ++++ drivers/thermal/thermal_sys.c | 96 +++++++++++++++++++++++++++++++++++ include/linux/thermal.h | 8 +++ 3 files changed, 114 insertions(+), 0 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index b61e46f..1db9a9d 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -209,6 +209,13 @@ passive Valid values: 0 (disabled) or greater than 1000 RW, Optional
+trip_stats
- This attribute presents the effective cooling generated from all the
- cooling devices attached to a trip point. The output is a pair of value
- for each trip point. Each pair represents
- (trip index, cooling temperature difference in millidegree Celsius)
- RO, Optional
***************************** * Cooling device attributes * ***************************** @@ -261,6 +268,9 @@ method, the sys I/F structure will be built like this: |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ |---cdev1: --->/sys/class/thermal/cooling_device3 |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
- |---trip_stats 0 0
- 1 8000 /*trip 1 causes 8 degree Celsius drop*/
- 2 3000 /*trip 2 causes 3 degree Celsius drop*/
|cooling_device0: |---type: Processor diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index dd9a574..47e7b6e 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -92,6 +92,64 @@ static void release_idr(struct idr *idr, struct mutex *lock, int id) if (lock) mutex_unlock(lock); } +static void update_cooling_stats(struct thermal_zone_device *tz, long cur_temp) +{
- int count, max_index, cur_interval;
- long trip_temp, max_temp = 0, cool_temp;
- static int last_trip_level = -1;
I got confused here. Are you sure using a static variable here is safe? I suppose this function is called for any thermal_zone_device, which in turns, may have different amount of trips, and different update rate. You may be using last_trip_level as reference for a different tz. Meaning, you would be screwing the stat buffers silently.
If that is the case, I suggest you to move this to your stat structure.
Agree. This looks a clear problem. Surely i will move last_trip_level inside structure tz.
- if (cur_temp >= tz->last_temperature)
- return;
- /* find the trip according to last temperature */
- for (count = 0; count < tz->trips; count++) {
- tz->ops->get_trip_temp(tz, count, &trip_temp);
- if (tz->last_temperature >= trip_temp) {
- if (max_temp < trip_temp) {
- max_temp = trip_temp;
- max_index = count;
- }
- }
- }
- if (!max_temp) {
- last_trip_level = -1;
- return;
- }
- cur_interval = tz->stat[max_index].interval_ptr;
- cool_temp = tz->last_temperature - cur_temp;
- if (last_trip_level != max_index) {
- if (++cur_interval == INTERVAL_HISTORY)
- cur_interval = 0;
- tz->stat[max_index].cool_temp[cur_interval] = cool_temp;
- tz->stat[max_index].interval_ptr = cur_interval;
- last_trip_level = max_index;
- } else {
- tz->stat[max_index].cool_temp[cur_interval] += cool_temp;
Why do you need to sum up here? Wouldn't this break your statistics? (I may completely missed your idea for last_trip_level).
This will be summed up because after applying cooling action there is some cooling happening but not enough to change the trip level. So unless there is cooling enough to change the trip level I keep summing the temperature.
- }
+}
+static int calculate_cooling_temp_avg(struct thermal_zone_device *tz, int trip,
- int *avg_cool)
+{
- int result = 0, count = 0, used_data = 0;
- if (trip > THERMAL_MAX_TRIPS)
Shouldn't this be checked against tz->trips ? At least you allocate your *stat based on it.
Correct.
- return -EINVAL;
- *avg_cool = 0;
- for (count = 0; count < INTERVAL_HISTORY; count++) {
- if (tz->stat[trip].cool_temp[count] > 0) {
- *avg_cool += tz->stat[trip].cool_temp[count];
- used_data++;
- }
- }
- if (used_data > 1)
- *avg_cool = (*avg_cool)/used_data;
IIRC, the preferred operator style is (*avg_cool) / used_data
OK.
- return result;
result is used only to hold a 0 here?
Ok This variable is not needed.
+}
/* sys I/F for thermal zone */
@@ -493,6 +551,26 @@ temp_crit_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%ld\n", temperature); }
+static ssize_t +thermal_cooling_trip_stats_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+{
- struct thermal_zone_device *tz = to_thermal_zone(dev);
- int avg_cool = 0, result, trip_index;
- ssize_t len = 0;
- for (trip_index = 0; trip_index < tz->trips; trip_index++) {
- result = calculate_cooling_temp_avg(tz,
- trip_index, &avg_cool);
- if (!result)
- len += sprintf(buf + len, "%d %d\n",
- trip_index, avg_cool);
- }
- return len;
+} +static DEVICE_ATTR(trip_stats, 0444,
- thermal_cooling_trip_stats_show, NULL);
static struct thermal_hwmon_device * thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz) @@ -1049,6 +1127,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) goto leave; }
- update_cooling_stats(tz, temp);
for (count = 0; count < tz->trips; count++) { tz->ops->get_trip_type(tz, count, &trip_type); tz->ops->get_trip_temp(tz, count, &trip_temp); @@ -1181,6 +1261,13 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, return ERR_PTR(result); }
- /*Allocate variables for cooling stats*/
- tz->stat = devm_kzalloc(&tz->device,
- sizeof(struct thermal_cooling_stats) * trips,
- GFP_KERNEL);
You never free this memory here.
yes because memory allocated with devm_kzalloc is freed automatically when the device is freed.
- if (!tz->stat)
- goto unregister;
/* sys I/F */ if (type) { result = device_create_file(&tz->device, &dev_attr_type); @@ -1207,6 +1294,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, passive = 1; }
- if (trips > 0) {
- result = device_create_file(&tz->device, &dev_attr_trip_stats);
- if (result)
- goto unregister;
The failing paths after your allocation point must consider freeing the memory you requested.
- }
if (!passive) result = device_create_file(&tz->device, &dev_attr_passive); @@ -1282,6 +1375,9 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) for (count = 0; count < tz->trips; count++) TRIP_POINT_ATTR_REMOVE(&tz->device, count);
- if (tz->trips > 0)
- device_remove_file(&tz->device, &dev_attr_trip_stats);
Amit,
I think here it would be a good place to free the memory you allocated for *stat
thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); idr_destroy(&tz->idr); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 47b4a27..47504c7 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -72,6 +72,13 @@ struct thermal_cooling_device_ops { #define THERMAL_TRIPS_NONE -1 #define THERMAL_MAX_TRIPS 12 #define THERMAL_NAME_LENGTH 20 +#define INTERVAL_HISTORY 12
+struct thermal_cooling_stats {
- int cool_temp[INTERVAL_HISTORY];
- int interval_ptr;
+};
struct thermal_cooling_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -102,6 +109,7 @@ struct thermal_zone_device { struct list_head cooling_devices; struct idr idr; struct mutex lock; /* protect cooling devices list */
- struct thermal_cooling_stats *stat;
struct list_head node; struct delayed_work poll_queue; }; -- 1.7.1
linux-pm mailing list linux-pm@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/linux-pm
Hello Amit,
On Tue, Feb 07, 2012 at 09:52:40AM -0800, Amit Kachhap wrote:
Hi eduardo,
Thanks for the detail review.
On 6 February 2012 23:09, Eduardo Valentin eduardo.valentin@ti.com wrote:
Hello Amit,
some comments embedded.
On Wed, Jan 18, 2012 at 02:51:07PM +0530, Amit Daniel Kachhap wrote:
Add a sysfs node code to report effective cooling of all cooling devices attached to each trip points of a thermal zone. The cooling data reported will be absolute if the higher temperature trip points are arranged first otherwise the cooling stats is the cumulative effect of the earlier invoked cooling handlers.
The basic assumption is that cooling devices will bring down the temperature in a symmetric manner and those statistics can be stored back and used for further tuning of the system.
Signed-off-by: Amit Daniel Kachhap amit.kachhap@linaro.org
Documentation/thermal/sysfs-api.txt | 10 ++++ drivers/thermal/thermal_sys.c | 96 +++++++++++++++++++++++++++++++++++ include/linux/thermal.h | 8 +++ 3 files changed, 114 insertions(+), 0 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index b61e46f..1db9a9d 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -209,6 +209,13 @@ passive Valid values: 0 (disabled) or greater than 1000 RW, Optional
+trip_stats
- This attribute presents the effective cooling generated from all the
- cooling devices attached to a trip point. The output is a pair of value
- for each trip point. Each pair represents
- (trip index, cooling temperature difference in millidegree Celsius)
- RO, Optional
***************************** * Cooling device attributes * ***************************** @@ -261,6 +268,9 @@ method, the sys I/F structure will be built like this: |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ |---cdev1: --->/sys/class/thermal/cooling_device3 |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
- |---trip_stats 0 0
- 1 8000 /*trip 1 causes 8 degree Celsius drop*/
- 2 3000 /*trip 2 causes 3 degree Celsius drop*/
|cooling_device0: |---type: Processor diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index dd9a574..47e7b6e 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -92,6 +92,64 @@ static void release_idr(struct idr *idr, struct mutex *lock, int id) if (lock) mutex_unlock(lock); } +static void update_cooling_stats(struct thermal_zone_device *tz, long cur_temp) +{
- int count, max_index, cur_interval;
- long trip_temp, max_temp = 0, cool_temp;
- static int last_trip_level = -1;
I got confused here. Are you sure using a static variable here is safe? I suppose this function is called for any thermal_zone_device, which in turns, may have different amount of trips, and different update rate. You may be using last_trip_level as reference for a different tz. Meaning, you would be screwing the stat buffers silently.
If that is the case, I suggest you to move this to your stat structure.
Agree. This looks a clear problem. Surely i will move last_trip_level inside structure tz.
- if (cur_temp >= tz->last_temperature)
- return;
- /* find the trip according to last temperature */
- for (count = 0; count < tz->trips; count++) {
- tz->ops->get_trip_temp(tz, count, &trip_temp);
- if (tz->last_temperature >= trip_temp) {
- if (max_temp < trip_temp) {
- max_temp = trip_temp;
- max_index = count;
- }
- }
- }
- if (!max_temp) {
- last_trip_level = -1;
- return;
- }
- cur_interval = tz->stat[max_index].interval_ptr;
- cool_temp = tz->last_temperature - cur_temp;
- if (last_trip_level != max_index) {
- if (++cur_interval == INTERVAL_HISTORY)
- cur_interval = 0;
- tz->stat[max_index].cool_temp[cur_interval] = cool_temp;
- tz->stat[max_index].interval_ptr = cur_interval;
- last_trip_level = max_index;
- } else {
- tz->stat[max_index].cool_temp[cur_interval] += cool_temp;
Why do you need to sum up here? Wouldn't this break your statistics? (I may completely missed your idea for last_trip_level).
This will be summed up because after applying cooling action there is some cooling happening but not enough to change the trip level. So unless there is cooling enough to change the trip level I keep summing the temperature.
OK. You may want to add this explanation as a comment in the code.
- }
+}
+static int calculate_cooling_temp_avg(struct thermal_zone_device *tz, int trip,
- int *avg_cool)
+{
- int result = 0, count = 0, used_data = 0;
- if (trip > THERMAL_MAX_TRIPS)
Shouldn't this be checked against tz->trips ? At least you allocate your *stat based on it.
Correct.
- return -EINVAL;
- *avg_cool = 0;
- for (count = 0; count < INTERVAL_HISTORY; count++) {
- if (tz->stat[trip].cool_temp[count] > 0) {
- *avg_cool += tz->stat[trip].cool_temp[count];
- used_data++;
- }
- }
- if (used_data > 1)
- *avg_cool = (*avg_cool)/used_data;
IIRC, the preferred operator style is (*avg_cool) / used_data
OK.
- return result;
result is used only to hold a 0 here?
Ok This variable is not needed.
+}
/* sys I/F for thermal zone */
@@ -493,6 +551,26 @@ temp_crit_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%ld\n", temperature); }
+static ssize_t +thermal_cooling_trip_stats_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+{
- struct thermal_zone_device *tz = to_thermal_zone(dev);
- int avg_cool = 0, result, trip_index;
- ssize_t len = 0;
- for (trip_index = 0; trip_index < tz->trips; trip_index++) {
- result = calculate_cooling_temp_avg(tz,
- trip_index, &avg_cool);
- if (!result)
- len += sprintf(buf + len, "%d %d\n",
- trip_index, avg_cool);
- }
- return len;
+} +static DEVICE_ATTR(trip_stats, 0444,
- thermal_cooling_trip_stats_show, NULL);
static struct thermal_hwmon_device * thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz) @@ -1049,6 +1127,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) goto leave; }
- update_cooling_stats(tz, temp);
for (count = 0; count < tz->trips; count++) { tz->ops->get_trip_type(tz, count, &trip_type); tz->ops->get_trip_temp(tz, count, &trip_temp); @@ -1181,6 +1261,13 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, return ERR_PTR(result); }
- /*Allocate variables for cooling stats*/
- tz->stat = devm_kzalloc(&tz->device,
- sizeof(struct thermal_cooling_stats) * trips,
- GFP_KERNEL);
You never free this memory here.
yes because memory allocated with devm_kzalloc is freed automatically when the device is freed.
OK. missed the devm_ on your code. My bad.
- if (!tz->stat)
- goto unregister;
/* sys I/F */ if (type) { result = device_create_file(&tz->device, &dev_attr_type); @@ -1207,6 +1294,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, passive = 1; }
- if (trips > 0) {
- result = device_create_file(&tz->device, &dev_attr_trip_stats);
- if (result)
- goto unregister;
The failing paths after your allocation point must consider freeing the memory you requested.
- }
if (!passive) result = device_create_file(&tz->device, &dev_attr_passive); @@ -1282,6 +1375,9 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) for (count = 0; count < tz->trips; count++) TRIP_POINT_ATTR_REMOVE(&tz->device, count);
- if (tz->trips > 0)
- device_remove_file(&tz->device, &dev_attr_trip_stats);
Amit,
I think here it would be a good place to free the memory you allocated for *stat
thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); idr_destroy(&tz->idr); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 47b4a27..47504c7 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -72,6 +72,13 @@ struct thermal_cooling_device_ops { #define THERMAL_TRIPS_NONE -1 #define THERMAL_MAX_TRIPS 12 #define THERMAL_NAME_LENGTH 20 +#define INTERVAL_HISTORY 12
+struct thermal_cooling_stats {
- int cool_temp[INTERVAL_HISTORY];
- int interval_ptr;
+};
struct thermal_cooling_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -102,6 +109,7 @@ struct thermal_zone_device { struct list_head cooling_devices; struct idr idr; struct mutex lock; /* protect cooling devices list */
- struct thermal_cooling_stats *stat;
struct list_head node; struct delayed_work poll_queue; }; -- 1.7.1
linux-pm mailing list linux-pm@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/linux-pm
-
Amit Daniel Kachhap -
Amit Kachhap
-
Eduardo Valentin -
Greg KH -
Pavel Machek