(Do not apply)

This is only necessary at present since the devicetree support relies on some aspects of some existing hard-coded board file for some parts of initialization. In the long run, that code can be ported to devicetree too.

Signed-off-by: Stephen Warren swarren@nvidia.com --- I needed to test devicetree support on Tegra Seaboard rather than Harmony. This patch is the changes I needed to make to have that work. It builds on the previous patches I recently posted. It's only an FYI just in case anyone else finds it useful.

arch/arm/boot/dts/tegra-harmony.dts | 14 ++++++-------- arch/arm/mach-tegra/board-dt.c | 14 ++------------ 2 files changed, 8 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 82fa0c2..6fe09d7 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -9,7 +9,8 @@ interrupt-parent = <&intc>;

chosen { - bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootdelay=2"; + /*bootargs = " vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootdelay=2";*/ + bootargs = "earlyprintk console=ttyS0,115200n8 root=/dev/mmcblk1p3 ro rootwait noinitrd lp0_vec=0x2000@0x1C406000 loglevel=8 kcrashmem=0x100000@0x02000000 mem=384M@0M nvmem=128M@384M mem=512M@512M"; };

memory { @@ -90,24 +91,21 @@ compatible = "nvidia,tegra250-sdhci"; reg = <0xc8000200 0x200>; interrupts = < 47 >; - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + status = "disabled"; };

sdhci@c8000400 { compatible = "nvidia,tegra250-sdhci"; reg = <0xc8000400 0x200>; interrupts = < 51 >; - status = "disabled"; + gpios = <&gpio 69 0>, /* cd, gpio PI5 */ + <&gpio 57 0>, /* wp, gpio PH1 */ + <&gpio 70 0>; /* power, gpio PI6 */ };

sdhci@c8000600 { compatible = "nvidia,tegra250-sdhci"; reg = <0xc8000600 0x200>; interrupts = < 63 >; - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ }; }; diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c index 7b9d469..b67c382 100644 --- a/arch/arm/mach-tegra/board-dt.c +++ b/arch/arm/mach-tegra/board-dt.c @@ -36,7 +36,7 @@ #include <mach/irqs.h>

#include "board.h" -#include "board-harmony.h" +#include "board-seaboard.h" #include "clock.h"

static struct resource sdhci_resource1[] = { @@ -126,16 +126,6 @@ static struct platform_device *harmony_devices[] __initdata = { &tegra_sdhci_device4, };

-static void __init tegra_dt_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) -{ - mi->nr_banks = 2; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = 448 * SZ_1M; - mi->bank[1].start = SZ_512M; - mi->bank[1].size = SZ_512M; -} - static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { /* name parent rate enabled */ { "uartd", "pll_p", 216000000, true }, @@ -158,7 +148,7 @@ static void __init tegra_dt_init(void)

tegra_clk_init_from_table(tegra_dt_clk_init_table);

- harmony_pinmux_init(); + seaboard_pinmux_init();

platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));