I've used the following commands to create an Ubuntu build if it helps:

wget http://snapshots.linaro.org/11.05-daily/linaro-ubuntu-desktop/20110728/1/ima...

wget http://snapshots.linaro.org/11.05-daily/linaro-hwpacks/lt-panda/20110728/0/i...

bzr branch lp:linaro-image-tools

./linaro-image-tools/linaro-media-create --mmc /dev/sdc --dev panda --hwpack hwpack_linaro-lt-panda_20110728-0_armel_supported.tar.gz --binary linaro-n-ubuntu-desktop-tar-20110728-1.tar.gz

-Zach

On 16 August 2011 09:20, Frederik Lotter Frederik.Lotter@arm.com wrote:

Hi Christian,

I am using 32-bit Ubuntu 11.04. Just here in my office everyone is running into the same issue. We are all Ubuntu users (11.04) and both 32-bit and 64-bit machines.

Let me know if anything else is needed.

Fred

-----Original Message----- From: Christian Robottom Reis [mailto:kiko@linaro.org] Sent: 16 August 2011 14:36 To: Frederik Lotter Cc: Linaro Development Subject: [Frederik.Lotter@arm.com: [UBUNTU] linaro-media-create failing]

...

We have several people here in the support office trying to build an sdcard using the latest hwpack and root filesystem files as found here:

http://releases.linaro.org/platform/linaro-n/ubuntu/leb-panda/latest/

We are running into a segfualt in /usr/bin/dpkg during what seems to be the hwpack installation.

Hi Frederik,

Please use the linaro-dev mailing list (copied here) for future issue reports. I looked at the log and it's indeed odd that this is happening. Can you reproduce the problem on any of your hosts, and if so, what OS version is installed on them? -- Christian Robottom Reis, Engineering VP Brazil (GMT-3) | [+55] 16 9112 6430 | [+1] 612 216 4935 Linaro.org: Open Source Software for ARM SoCs

-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium.  Thank you.

---

linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev

Be sure to use the hwpack_linaro-lt-panda-x11 variant. Without it I've had issues with x.

Regards Tom

On Aug 16, 2011, at 10:14 AM, Dave Martin dave.martin@linaro.org wrote:

On Tue, Aug 16, 2011 at 09:41:29AM -0500, Zach Pfeffer wrote:

...

I've used the following commands to create an Ubuntu build if it helps:

wget http://snapshots.linaro.org/11.05-daily/linaro-ubuntu-desktop/20110728/1/ima...

wget http://snapshots.linaro.org/11.05-daily/linaro-hwpacks/lt-panda/20110728/0/i...

bzr branch lp:linaro-image-tools

./linaro-image-tools/linaro-media-create --mmc /dev/sdc --dev panda --hwpack hwpack_linaro-lt-panda_20110728-0_armel_supported.tar.gz --binary linaro-n-ubuntu-desktop-tar-20110728-1.tar.gz

Have you booted the resulting image?

I did the same thing -- here is a tiny excerpt from the bootlog from these images, (on panda rev A1):

http://pastebin.ubuntu.com/667287/

About 700K of log later I got a prompt, but X didn't seem to come up. Are there any limitations on monitors, or should the board auto-detect an appropriate display mode etc.?

Cheers ---Dave

...

-Zach

On 16 August 2011 09:20, Frederik Lotter Frederik.Lotter@arm.com wrote:

...

Hi Christian,

I am using 32-bit Ubuntu 11.04. Just here in my office everyone is running into the same issue. We are all Ubuntu users (11.04) and both 32-bit and 64-bit machines.

Let me know if anything else is needed.

Fred

-----Original Message----- From: Christian Robottom Reis [mailto:kiko@linaro.org] Sent: 16 August 2011 14:36 To: Frederik Lotter Cc: Linaro Development Subject: [Frederik.Lotter@arm.com: [UBUNTU] linaro-media-create failing]

...

We have several people here in the support office trying to build an sdcard using the latest hwpack and root filesystem files as found here:

http://releases.linaro.org/platform/linaro-n/ubuntu/leb-panda/latest/

We are running into a segfualt in /usr/bin/dpkg during what seems to be the hwpack installation.

Hi Frederik,

Please use the linaro-dev mailing list (copied here) for future issue reports. I looked at the log and it's indeed odd that this is happening. Can you reproduce the problem on any of your hosts, and if so, what OS version is installed on them? -- Christian Robottom Reis, Engineering VP Brazil (GMT-3) | [+55] 16 9112 6430 | [+1] 612 216 4935 Linaro.org: Open Source Software for ARM SoCs

-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

---

linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev

---

linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev

---

linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev

On Wed, Aug 17, 2011 at 8:07 PM, Christian Robottom Reis kiko@linaro.org wrote:

On Tue, Aug 16, 2011 at 03:20:17PM +0100, Frederik Lotter wrote:

...

I am using 32-bit Ubuntu 11.04. Just here in my office everyone is running into the same issue. We are all Ubuntu users (11.04) and both 32-bit and 64-bit machines.

Hey Frederik,

Did you figure out what the issue was?

I wonder if this could be something related with the way the host is configured. I was able to run l-m-c with the same images at both 32 and 64-bits machines.

I know that if you have scratchbox installed, or any other software that changes the qemu-arm-static path at your binfmt config, l-m-c will fail, but I don't believe you'd end up with a segfault.

Cheers,

On Tue, Aug 16, 2011, James Westby wrote:

It was in the posted log: qemu-user-static: Installed: 0.14.50-2011.06-0-0ubuntu1~ppa11.04.1

Ah thanks; that's fairly recent, so I guess this is a bug that deserves filing