From: Shawn Guo shawn.gsc@gmail.com

The mx51evk u-boot has an issue that system will get reset every 2 hours.

MC13892 has an inside charge timer which expires in 120 minutes. If ICHRG and CHGAUTOB are not set properly, this timer expiration will get system power recycled.

Since mx51evk has no Li-Ion battery on board, the patch sets ICHRG in externally powered mode and sets CHGAUTOB bit to avoid automatic charging, so that system will not get reset by this timer expiration.

The patch also corrects the bit field definition of register 48 (Charger 0) per latest MC13892 Reference Manual.

Signed-off-by: Shawn Guo shawn.gsc@gmail.com --- board/freescale/mx51evk/mx51evk.c | 8 ++++---- include/mc13892.h | 16 ++++++++-------- 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index c8d7d39..0b58b1b 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -188,10 +188,10 @@ static void power_init(void) val &= ~PWGT2SPIEN; pmic_reg_write(REG_POWER_MISC, val);

- /* Write needed to update Charger 0 */ - pmic_reg_write(REG_CHARGE, VCHRG0 | VCHRG1 | VCHRG2 | - ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | ICHRGTR0 | - OVCTRL1 | UCHEN | CHRGLEDEN | CYCLB); + /* Externally powered */ + val = pmic_reg_read(REG_CHARGE); + val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; + pmic_reg_write(REG_CHARGE, val);

/* power up the system first */ pmic_reg_write(REG_POWER_MISC, PWUP); diff --git a/include/mc13892.h b/include/mc13892.h index 791e3ec..61c3e6e 100644 --- a/include/mc13892.h +++ b/include/mc13892.h @@ -29,24 +29,24 @@

/* REG_CHARGE */

-#define VCHRG0 0 +#define VCHRG0 (1 << 0) #define VCHRG1 (1 << 1) #define VCHRG2 (1 << 2) #define ICHRG0 (1 << 3) #define ICHRG1 (1 << 4) #define ICHRG2 (1 << 5) #define ICHRG3 (1 << 6) -#define ICHRGTR0 (1 << 7) -#define ICHRGTR1 (1 << 8) -#define ICHRGTR2 (1 << 9) +#define TREN (1 << 7) +#define ACKLPB (1 << 8) +#define THCHKB (1 << 9) #define FETOVRD (1 << 10) #define FETCTRL (1 << 11) #define RVRSMODE (1 << 13) -#define OVCTRL0 (1 << 15) -#define OVCTRL1 (1 << 16) -#define UCHEN (1 << 17) +#define PLIM0 (1 << 15) +#define PLIM1 (1 << 16) +#define PLIMDIS (1 << 17) #define CHRGLEDEN (1 << 18) -#define CHRGRAWPDEN (1 << 19) +#define CHGTMRRST (1 << 19) #define CHGRESTART (1 << 20) #define CHGAUTOB (1 << 21) #define CYCLB (1 << 22)