I' getting this error during boot on a freshly dd'd image of alip or nano prebuilt images.
[ 5.487091] generic-usb 0003:046D:C018.0003: input: USB HID v1.11 Mouse [Log0 [ 5.755706] udevd[733]: starting version 173
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [ 7.124542] omap_device: omap_i2c.1: new worst case activate latency 0: 14406 Begin: Running /scripts/local-premount ... done.
[ 8.234649] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. ) Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
*[ 14.322998] Kernel panic - not syncing: Attempted to kill init! * [ 14.336883] [<80010c9d>] (unwind_backtrace+0x1/0x90) from [<803e137d>] (pani) [ 14.353027] [<803e137d>] (panic+0x45/0x124) from [<80036fb1>] (forget_origin) [ 14.369812] [<80036fb1>] (forget_original_parent+0x65/0x14c) from [<800370a9) [ 14.387023] [<800370a9>] (exit_notify+0x11/0xe4) from [<80037573>] (do_exit+) [ 14.403015] [<80037573>] (do_exit+0x215/0x286) from [<8003774b>] (do_group_e) [ 14.419433] [<8003774b>] (do_group_exit+0x5f/0x80) from [<80041b8f>] (get_si) [ 14.436920] [<80041b8f>] (get_signal_to_deliver+0x27f/0x2bc) from [<8000e165) [ 14.454193] [<8000e165>] (do_signal+0x81/0x138) from [<8000e62d>] (do_notify) [ 14.470947] [<8000e62d>] (do_notify_resume+0x15/0x3c) from [<8000c059>] (wor)
and struck here forever. Is this a mistake i'm doing or a bug..?? After trying to boot a number of times, finally succeeds.
Not just this but also Seg faults like this during shutdown:
umount: /run/lock: not mounted
* Will now halt
[ 9085.198303] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa [ 9085.211364] Internal error: : 1028 [#1] PREEMPT SMP
[ 9085.221252] Modules linked in: bluetooth mousedev snd_soc_overo libertas_sdic [ 9085.251281] CPU: 0 Not tainted (3.1.1-21-linaro-omap #21~ci~201202260723) [ 9085.265747] PC is at musb_generic_disable+0x16/0x1e
[ 9085.276214] LR is at musb_shutdown+0x33/0x6e
[ 9085.286010] pc : [<802f238e>] lr : [<802f2639>] psr: 600000b3
[ 9085.286010] sp : 8e083e58 ip : 0002ba34 fp : 00000000
[ 9085.308715] r10: 00000000 r9 : 8e082000 r8 : 8000c204
[ 9085.319458] r7 : 00000003 r6 : 80c6aeec r5 : 40000013 r4 : 8ed96128
[ 9085.331573] r3 : fa0ab000 r2 : 00000000 r1 : 0000000c r0 : 8ed96128
[ 9085.343780] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA Thumb Segment r [ 9085.356933] Control: 50c5387d Table: 8e330019 DAC: 00000015
[ 9085.368377] Process halt (pid: 2541, stack limit = 0x8e0822f8)
[ 9085.379913] Stack: (0x8e083e58 to 0x8e084000)
[ 9085.389892] 3e40: 802f4 [ 9085.404022] 3e60: 8ed2c008 80282293 8028227f 80280499 806c2a7c cdef0123 2812b [ 9085.418090] 3e80: cdef0123 800431df 8e2c75c0 004ae036 8e2c75c0 00000001 00000 [ 9085.432281] 3ea0: 8e2c75c0 00000001 00000001 8e2c7a40 8e2c75c0 00000034 00000 [ 9085.446563] 3ec0: 00000000 00000034 60000013 80058f47 00000034 00000000 00000 [ 9085.460845] 3ee0: 00000000 00000000 8e01a440 00000000 800ae6c5 806c96f4 8e010 [ 9085.475219] 3f00: 00000000 00000000 60000013 800593b7 00000002 00000000 00005 [ 9085.489685] 3f20: 00000000 8e01a444 8e2c75c0 00000001 00000000 806c96e0 800a4 [ 9085.504211] 3f40: 8e01a440 8e083f9c 800c76d5 00000000 00000000 803f0feb 8e2c1 [ 9085.518707] 3f60: 00000000 8e2c75c0 00000001 8000c167 00000058 20000030 00003 [ 9085.533111] 3f80: 00000000 80059a63 00000002 271aec19 00000006 00000002 7ef06 [ 9085.547454] 3fa0: 00000058 8000bfe1 00000002 7ef0fe44 fee1dead 28121969 43213 [ 9085.561828] 3fc0: 00000002 7ef0fe44 00000006 00000058 00000000 00000000 76fc0 [ 9085.576171] 3fe0: 00000058 7ef0fcb4 76f2a2ad 76eb6ed6 20000030 fee1dead 00000 [ 9085.590545] [<802f238e>] (musb_generic_disable+0x16/0x1e) from [<802f2639>] ) [ 9085.606140] [<802f2639>] (musb_shutdown+0x33/0x6e) from [<80282293>] (platfo) [ 9085.621917] [<80282293>] (platform_drv_shutdown+0x15/0x16) from [<80280499>]) [ 9085.637969] [<80280499>] (device_shutdown+0x49/0x70) from [<80042bbb>] (kern) [ 9085.653106] [<80042bbb>] (kernel_halt+0xf/0x2c) from [<800431df>] (sys_reboo) [ 9085.667968] [<800431df>] (sys_reboot+0xa7/0x158) from [<8000bfe1>] (ret_fast) [ 9085.683380] Code: 80da 811a f883 2060 (7a9a) 885a
[ 9085.694732] ------------[ cut here ]------------
[ 9085.705871] WARNING: at /build/buildd/linux-linaro-omap-3.1-3.1.1/arch/arm/m) [ 9085.731658] In-band Error seen by MPU at address 0
[ 9085.743377] Modules linked in: bluetooth mousedev snd_soc_overo libertas_sdic [ 9085.777221] [<80010c9d>] (unwind_backtrace+0x1/0x90) from [<8003495d>] (warn) [ 9085.794372] [<8003495d>] (warn_slowpath_common+0x39/0x50) from [<800349d7>] ) [ 9085.811798] [<800349d7>] (warn_slowpath_fmt+0x21/0x2a) from [<80020109>] (om) [ 9085.829071] [<80020109>] (omap3_l3_app_irq+0xc9/0x118) from [<8006cca7>] (ha) [ 9085.847076] [<8006cca7>] (handle_irq_event_percpu+0x71/0x1a2) from [<8006ce0) [ 9085.864990] [<8006ce07>] (handle_irq_event+0x2f/0x44) from [<8006e47d>] (han) [ 9085.882141] [<8006e47d>] (handle_level_irq+0x81/0xa4) from [<8006c7ed>] (gen) [ 9085.899383] [<8006c7ed>] (generic_handle_irq+0x1d/0x30) from [<8000c8eb>] (h) [ 9085.915985] [<8000c8eb>] (handle_IRQ+0x4f/0x84) from [<803f1937>] (__irq_svc) [ 9085.931793] [<803f1937>] (__irq_svc+0x37/0x114) from [<803f15d8>] (_raw_spin) [ 9085.948486] [<803f15d8>] (_raw_spin_unlock_irq+0x24/0x42) from [<8000eb81>] ) [ 9085.964630] [<8000eb81>] (die+0x63/0xb2) from [<8000852d>] (do_DataAbort+0x5) [ 9085.980041] [<8000852d>] (do_DataAbort+0x55/0x64) from [<803f18b9>] (__dabt_) [ 9085.996154] Exception stack(0x8e083e10 to 0x8e083e58)
[ 9086.008880] 3e00: 8ed96128 0000000c 00000 [ 9086.025054] 3e20: 8ed96128 40000013 80c6aeec 00000003 8000c204 8e082000 00000 [ 9086.041320] 3e40: 0002ba34 8e083e58 802f2639 802f238e 600000b3 ffffffff
[ 9086.055877] [<803f18b9>] (__dabt_svc+0x39/0x80) from [<802f238e>] (musb_gene) [ 9086.073028] [<802f238e>] (musb_generic_disable+0x16/0x1e) from [<802f2639>] ) [ 9086.090515] [<802f2639>] (musb_shutdown+0x33/0x6e) from [<80282293>] (platfo) [ 9086.108123] [<80282293>] (platform_drv_shutdown+0x15/0x16) from [<80280499>]) [ 9086.126007] [<80280499>] (device_shutdown+0x49/0x70) from [<80042bbb>] (kern) [ 9086.142852] [<80042bbb>] (kernel_halt+0xf/0x2c) from [<800431df>] (sys_reboo) [ 9086.159393] [<800431df>] (sys_reboot+0xa7/0x158) from [<8000bfe1>] (ret_fast) [ 9086.176391] ---[ end trace b0d19d3ddd75e13f ]---
[ 9086.189422] ---[ end trace b0d19d3ddd75e140 ]---
[ 9086.202209] note: halt[2541] exited with preempt_count 1
[ 9086.215820] BUG: scheduling while atomic: halt/2541/0x40000002
[ 9086.229858] INFO: lockdep is turned off.
[ 9086.241851] Modules linked in: bluetooth mousedev snd_soc_overo libertas_sdic [ 9086.278289] [<80010c9d>] (unwind_backtrace+0x1/0x90) from [<803eef6d>] (__sc) [ 9086.295684] [<803eef6d>] (__schedule+0x5d/0x408) from [<8002f41b>] (__cond_r) [ 9086.313049] [<8002f41b>] (__cond_resched+0x17/0x22) from [<803ef38b>] (_cond) [ 9086.330657] [<803ef38b>] (_cond_resched+0x27/0x2e) from [<8009dcf3>] (unmap_) [ 9086.348419] [<8009dcf3>] (unmap_page_range+0xe3/0xe8) from [<8009e041>] (unm) [ 9086.365905] [<8009e041>] (unmap_vmas+0x59/0x6e) from [<800a098d>] (exit_mmap) [ 9086.382812] [<800a098d>] (exit_mmap+0xb9/0x164) from [<800332a7>] (mmput.par) [ 9086.399932] [<800332a7>] (mmput.part.33+0x15/0xa2) from [<80036077>] (exit_m) [ 9086.416961] [<80036077>] (exit_mm+0x107/0x10c) from [<800374cd>] (do_exit+0x) [ 9086.433593] [<800374cd>] (do_exit+0x16f/0x286) from [<8000ebb5>] (die+0x97/0) [ 9086.449615] [<8000ebb5>] (die+0x97/0xb2) from [<8000852d>] (do_DataAbort+0x5) [ 9086.465942] [<8000852d>] (do_DataAbort+0x55/0x64) from [<803f18b9>] (__dabt_) [ 9086.482849] Exception stack(0x8e083e10 to 0x8e083e58)
[ 9086.496185] 3e00: 8ed96128 0000000c 00000 [ 9086.512939] 3e20: 8ed96128 40000013 80c6aeec 00000003 8000c204 8e082000 00000 [ 9086.529632] 3e40: 0002ba34 8e083e58 802f2639 802f238e 600000b3 ffffffff
[ 9086.544525] [<803f18b9>] (__dabt_svc+0x39/0x80) from [<802f238e>] (musb_gene) [ 9086.561889] [<802f238e>] (musb_generic_disable+0x16/0x1e) from [<802f2639>] ) [ 9086.579559] [<802f2639>] (musb_shutdown+0x33/0x6e) from [<80282293>] (platfo) [ 9086.597320] [<80282293>] (platform_drv_shutdown+0x15/0x16) from [<80280499>]) [ 9086.615295] [<80280499>] (device_shutdown+0x49/0x70) from [<80042bbb>] (kern) [ 9086.632232] [<80042bbb>] (kernel_halt+0xf/0x2c) from [<800431df>] (sys_reboo) [ 9086.648803] [<800431df>] (sys_reboot+0xa7/0x158) from [<8000bfe1>] (ret_fast) Segmentation fault
[11644.518707] cfg80211: Calling CRDA for country: US
the message at 11644... indicates that the system is not shutdown completely.. Again is this my mistake or a bug..
I want it to work reliably, especially during the boot.
--------------------------------- Sudhangathan BS Ph:(+91) 9731-905-205 ---------------------------------
On 18 May 2012 10:51, Sudhangathan B S sudhangathan@gmail.com wrote:
I' getting this error during boot on a freshly dd'd image of alip or nano prebuilt images.
Please, could you add a link to the exact image you used? Latest pre-built images are available on http://snapshots.linaro.org/precise/pre-built/
This is link from which I downloaded the image for nano.. I'm using a Summit-Fire combination.. http://releases.linaro.org/images/12.03/oneiric/nano/overo-nano.img.gz more info: root@linaro-nano:~# uname -a Linux linaro-nano 3.1.1-21-linaro-omap #21~ci~20120226072322~4f4a8a65-Ubuntu SMP PREEMPT Sun Feb 26 19: armv7l armv7l armv7l GNU/Linux
and i'm not sure exactly which image i used for alip.. I'm sure it is the same link but can be any version from january to march. more info: root@linaro-alip:~# uname -a Linux linaro-alip 3.1.1-21-linaro-omap #21~ci~20120226072322~4f4a8a65-Ubuntu SMP PREEMPT Sun Feb 26 19: armv7l armv7l armv7l GNU/Linux
Need more info..?? --------------------------------- Sudhangathan BS Ph:(+91) 9731-905-205 ---------------------------------
On Fri, May 18, 2012 at 1:41 PM, Fathi Boudra fathi.boudra@linaro.orgwrote:
On 18 May 2012 10:51, Sudhangathan B S sudhangathan@gmail.com wrote:
I' getting this error during boot on a freshly dd'd image of alip or nano prebuilt images.
Please, could you add a link to the exact image you used? Latest pre-built images are available on http://snapshots.linaro.org/precise/pre-built/
Yeah---I'm also seeing this on Overo.
I'm confused as to what exactly is causing the kernel panic but I suspect something in user space that is exercising some less-used aspect of the kernel. Yesterday I tried using a well tested kernel with a recent linaro rootfs and saw a similar panic as the display was coming up. No solutions at this point.... -Ash
On Fri, May 18, 2012 at 3:17 AM, Sudhangathan B S sudhangathan@gmail.com wrote:
This is link from which I downloaded the image for nano.. I'm using a Summit-Fire combination.. http://releases.linaro.org/images/12.03/oneiric/nano/overo-nano.img.gz more info: root@linaro-nano:~# uname -a Linux linaro-nano 3.1.1-21-linaro-omap #21~ci~20120226072322~4f4a8a65-Ubuntu SMP PREEMPT Sun Feb 26 19: armv7l armv7l armv7l GNU/Linux
and i'm not sure exactly which image i used for alip.. I'm sure it is the same link but can be any version from january to march. more info: root@linaro-alip:~# uname -a Linux linaro-alip 3.1.1-21-linaro-omap #21~ci~20120226072322~4f4a8a65-Ubuntu SMP PREEMPT Sun Feb 26 19: armv7l armv7l armv7l GNU/Linux
Need more info..??
Sudhangathan BS Ph:(+91) 9731-905-205
On Fri, May 18, 2012 at 1:41 PM, Fathi Boudra fathi.boudra@linaro.org wrote:
On 18 May 2012 10:51, Sudhangathan B S sudhangathan@gmail.com wrote:
I' getting this error during boot on a freshly dd'd image of alip or nano prebuilt images.
Please, could you add a link to the exact image you used? Latest pre-built images are available on http://snapshots.linaro.org/precise/pre-built/
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
Hi,
We've seen it on Fast Models as well, using developer.tar.gz from wednesday.
Riku
On 18 May 2012 17:08, Ash Charles ash@gumstix.com wrote:
Yeah---I'm also seeing this on Overo.
I'm confused as to what exactly is causing the kernel panic but I suspect something in user space that is exercising some less-used aspect of the kernel. Yesterday I tried using a well tested kernel with a recent linaro rootfs and saw a similar panic as the display was coming up. No solutions at this point.... -Ash
On Fri, May 18, 2012 at 3:17 AM, Sudhangathan B S sudhangathan@gmail.com wrote:
This is link from which I downloaded the image for nano.. I'm using a Summit-Fire combination.. http://releases.linaro.org/images/12.03/oneiric/nano/overo-nano.img.gz more info: root@linaro-nano:~# uname -a Linux linaro-nano 3.1.1-21-linaro-omap #21~ci~20120226072322~4f4a8a65-Ubuntu SMP PREEMPT Sun Feb 26 19: armv7l armv7l armv7l GNU/Linux
and i'm not sure exactly which image i used for alip.. I'm sure it is the same link but can be any version from january to march. more info: root@linaro-alip:~# uname -a Linux linaro-alip 3.1.1-21-linaro-omap #21~ci~20120226072322~4f4a8a65-Ubuntu SMP PREEMPT Sun Feb 26 19: armv7l armv7l armv7l GNU/Linux
Need more info..??
Sudhangathan BS Ph:(+91) 9731-905-205
On Fri, May 18, 2012 at 1:41 PM, Fathi Boudra fathi.boudra@linaro.org wrote:
On 18 May 2012 10:51, Sudhangathan B S sudhangathan@gmail.com wrote:
I' getting this error during boot on a freshly dd'd image of alip or nano prebuilt images.
Please, could you add a link to the exact image you used? Latest pre-built images are available on http://snapshots.linaro.org/precise/pre-built/
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
I haven't had much luck with Linaro Linux 3.1 and 3.3. However, version 3.2 released in January (https://launchpad.net/linux-linaro/+milestone/3.2-2012.01) seems to boot up and shut down well. I know it isn't a prebuilt image, but right now manually compiling the kernel with omap2plus_defconfig configuration seems to be only way.
-
Adam Lee -
Ash Charles -
Fathi Boudra -
Riku Voipio -
Sudhangathan B S