Hi everyone,
I am trying to assemble a reference for the sound device specifics for all the platforms. The catch is that I don't have all the dev platforms available to me.
Here is where you can help! I have Panda and Beagle C4. I need everything else. If you have access to other platform(s), please do the following and email the output to me.
With a Linaro image or Ubuntu image (an image with with pulseaudio installed), run the following: "pacmd list-sinks" and email it to me. You will get an output that resembles this:
linaro@localhost:~$ pacmd list-sinks Welcome to PulseAudio! Use "help" for usage information.
1 sink(s) available.
* index: 0 name: <alsa_output.platform-soc-audio.analog-stereo> driver: <module-alsa-card.c> ... <lotsa stuff deleted>
module-udev-detect.discovered = "1" device.icon_name = "audio-card"
Thanks in advance!
Kurt Taylor (irc krtaylor)
On Fri, Apr 01, 2011 at 10:20:49AM -0500, Kurt Taylor wrote:
Hi everyone,
Hi Kurt,
I am trying to assemble a reference for the sound device specifics for all the platforms. The catch is that I don't have all the dev platforms available to me.
Here is where you can help! I have Panda and Beagle C4. I need everything else. If you have access to other platform(s), please do the following and email the output to me.
I'm not sure that mx51 babbage is one of the platforms you are concerned here, as there is no sound driver for this platform in Linaro kernel tree (.38) yet. (Well, the driver just went to mainline in .39 merge window.)
But anyway, I just tried Beta release with ALIP image, and here is my serial output.
[...] * Documentation: http://www.linaro.org * Starting bluetooth [ OK ] * PulseAudio configured for per-user sessions root@linaro:~# pacmd list-sinks No PulseAudio daemon running, or not running as session daemon.
I guess something went wrong since line "* PulseAudio configured ..." as I can see my serial console color changing to yellow from black from there. (no [OK] after the line?)
Hi, Kurt,
On Fri, Apr 1, 2011 at 11:20 PM, Kurt Taylor kurt.taylor@linaro.org wrote:
Hi everyone,
I am trying to assemble a reference for the sound device specifics for all the platforms. The catch is that I don't have all the dev platforms available to me.
Here is where you can help! I have Panda and Beagle C4. I need everything else. If you have access to other platform(s), please do the following and email the output to me.
With a Linaro image or Ubuntu image (an image with with pulseaudio installed), run the following: "pacmd list-sinks" and email it to me. You will get an output that resembles this:
Here is what I get:
jason@jason-laptop:~$ dmesg | grep Machine [ 0.000000] Machine: Genesi Efika MX (Smartbook)
jason@jason-laptop:~$ cat /etc/issue Ubuntu 10.10 \n \l
jason@jason-laptop:~$ pacmd list-sinks Welcome to PulseAudio! Use "help" for usage information.
1 sink(s) available.
* index: 0 name: <alsa_output.platform-soc-audio.2.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9009 volume: 0: 82% 1: 82% 0: -5.17 dB 1: -5.17 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 139.32 ms card: 0 <alsa_card.platform-soc-audio.2> module: 4 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "" alsa.id = "SGTL5000 SGTL5000-0" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "imx-3stack" alsa.long_card_name = "imx-3stack (SGTL5000)" device.bus_path = "platform-soc-audio.2" sysfs.path = "/devices/platform/soc-audio.2/sound/card0" device.string = "hw:0" device.buffering.buffer_size = "24576" device.buffering.fragment_size = "6144" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "imx-3stack Analog Stereo" module-udev-detect.discovered = "1" device.icon_name = "audio-card" ports: analog-output: Analog Output (priority 9900) analog-output-headphones: Analog Headphones (priority 9000) active port: <analog-output>
Thanks in advance!
Kurt Taylor (irc krtaylor)
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
I'm trying to get this data from the Smarttop to show the SPDIF device but I get the same "No PulseAudio daemon running, or not running as session daemon." as Shawn.. under exactly the same operating system as Jason..
Is there a special place I need to be running this, in a certain shell? All I can figure is some environment variable is being stripped when I enter a shell..
Pulseaudio is definitely running.. (outputting over HDMI via a Yamaha 5.1 receiver, the boot sound is loud, and pulse is handling audio mixing..)
Jason, what was the trick? :D
If you haven't previously set the user's client.conf to turn autospawn off then try running-> pulseaudio --daemonize
That should do the trick, thanks!
On 3 April 2011 09:45, Matt Sealey matt@genesi-usa.com wrote:
I'm trying to get this data from the Smarttop to show the SPDIF device but I get the same "No PulseAudio daemon running, or not running as session daemon." as Shawn.. under exactly the same operating system as Jason..
Is there a special place I need to be running this, in a certain shell? All I can figure is some environment variable is being stripped when I enter a shell..
Pulseaudio is definitely running.. (outputting over HDMI via a Yamaha 5.1 receiver, the boot sound is loud, and pulse is handling audio mixing..)
Jason, what was the trick? :D
-- Matt Sealey matt@genesi-usa.com Product Development Analyst, Genesi USA, Inc.
On Sat, Apr 2, 2011 at 4:31 AM, Jason Hui jason.hui@linaro.org wrote:
Hi, Kurt,
On Fri, Apr 1, 2011 at 11:20 PM, Kurt Taylor kurt.taylor@linaro.org
wrote:
Hi everyone,
I am trying to assemble a reference for the sound device specifics for
all
the platforms. The catch is that I don't have all the dev platforms available to me.
Here is where you can help! I have Panda and Beagle C4. I need
everything
else. If you have access to other platform(s), please do the following
and
email the output to me.
With a Linaro image or Ubuntu image (an image with with pulseaudio installed), run the following: "pacmd list-sinks" and email it to me.
You
will get an output that resembles this:
Here is what I get:
jason@jason-laptop:~$ dmesg | grep Machine [ 0.000000] Machine: Genesi Efika MX (Smartbook)
jason@jason-laptop:~$ cat /etc/issue Ubuntu 10.10 \n \l
jason@jason-laptop:~$ pacmd list-sinks Welcome to PulseAudio! Use "help" for usage information.
1 sink(s) available.
- index: 0 name: <alsa_output.platform-soc-audio.2.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9009 volume: 0: 82% 1: 82% 0: -5.17 dB 1: -5.17 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 139.32 ms card: 0 <alsa_card.platform-soc-audio.2> module: 4 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "" alsa.id = "SGTL5000 SGTL5000-0" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "imx-3stack" alsa.long_card_name = "imx-3stack (SGTL5000)" device.bus_path = "platform-soc-audio.2" sysfs.path = "/devices/platform/soc-audio.2/sound/card0" device.string = "hw:0" device.buffering.buffer_size = "24576" device.buffering.fragment_size = "6144" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "imx-3stack Analog Stereo" module-udev-detect.discovered = "1" device.icon_name = "audio-card" ports: analog-output: Analog Output (priority 9900) analog-output-headphones: Analog Headphones (priority
active port: <analog-output>Thanks in advance!
Kurt Taylor (irc krtaylor)
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
Hi Kurt,
Here is the output from Samsung Orion board:
Ubuntu Natty (development branch) (GNU/Linux 2.6.38-1000-s5pv310 armv7l) Machine: SMDKV310 ALSA device list: #0: SMDK-I2S
# pacmd list-sinks Welcome to PulseAudio! Use "help" for usage information.
1 sink(s) available.
* index: 0 name: <auto_null> driver: <module-null-sink.c> flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 1000 volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 344 KiB max rewind: 344 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 10000.00 ms module: 13 properties: device.description = "Dummy Output" device.class = "abstract" device.icon_name = "audio-card" Doesn't look like the card has been detected.
list-card says 0 card(s) available though it is detected during bootup as shown above.
Regards Sachin
On 4 April 2011 23:16, Kurt Taylor kurt.taylor@linaro.org wrote:
If you haven't previously set the user's client.conf to turn autospawn off then try running-> pulseaudio --daemonize
That should do the trick, thanks!
On 3 April 2011 09:45, Matt Sealey matt@genesi-usa.com wrote:
I'm trying to get this data from the Smarttop to show the SPDIF device but I get the same "No PulseAudio daemon running, or not running as session daemon." as Shawn.. under exactly the same operating system as Jason..
Is there a special place I need to be running this, in a certain shell? All I can figure is some environment variable is being stripped when I enter a shell..
Pulseaudio is definitely running.. (outputting over HDMI via a Yamaha 5.1 receiver, the boot sound is loud, and pulse is handling audio mixing..)
Jason, what was the trick? :D
-- Matt Sealey matt@genesi-usa.com Product Development Analyst, Genesi USA, Inc.
On Sat, Apr 2, 2011 at 4:31 AM, Jason Hui jason.hui@linaro.org wrote:
Hi, Kurt,
On Fri, Apr 1, 2011 at 11:20 PM, Kurt Taylor kurt.taylor@linaro.org
wrote:
Hi everyone,
I am trying to assemble a reference for the sound device specifics for
all
the platforms. The catch is that I don't have all the dev platforms available to me.
Here is where you can help! I have Panda and Beagle C4. I need
everything
else. If you have access to other platform(s), please do the following
and
email the output to me.
With a Linaro image or Ubuntu image (an image with with pulseaudio installed), run the following: "pacmd list-sinks" and email it to me.
You
will get an output that resembles this:
Here is what I get:
jason@jason-laptop:~$ dmesg | grep Machine [ 0.000000] Machine: Genesi Efika MX (Smartbook)
jason@jason-laptop:~$ cat /etc/issue Ubuntu 10.10 \n \l
jason@jason-laptop:~$ pacmd list-sinks Welcome to PulseAudio! Use "help" for usage information.
1 sink(s) available.
- index: 0 name: <alsa_output.platform-soc-audio.2.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9009 volume: 0: 82% 1: 82% 0: -5.17 dB 1: -5.17 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 139.32 ms card: 0 <alsa_card.platform-soc-audio.2> module: 4 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "" alsa.id = "SGTL5000 SGTL5000-0" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "imx-3stack" alsa.long_card_name = "imx-3stack (SGTL5000)" device.bus_path = "platform-soc-audio.2" sysfs.path = "/devices/platform/soc-audio.2/sound/card0" device.string = "hw:0" device.buffering.buffer_size = "24576" device.buffering.fragment_size = "6144" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "imx-3stack Analog Stereo" module-udev-detect.discovered = "1" device.icon_name = "audio-card" ports: analog-output: Analog Output (priority 9900) analog-output-headphones: Analog Headphones (priority
active port: <analog-output>Thanks in advance!
Kurt Taylor (irc krtaylor)
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
-
Jason Hui -
Kurt Taylor -
Matt Sealey -
Sachin Kamat -
Shawn Guo