linaro-dev February 2012

linaro-dev@lists.linaro.org

150 participants
147 discussions

[PATCH v7 0/4] Add SMDK5250 board support

by Chander Kashyap

This patchset add support for Samsung's SMDK5250 board based on EXYNOS5250 based SoC. It also adds support for MMC SPL booting. The porting is done by Samsung engineers at HQ in System LSI Team. I am contributing in upstreaming the code for the board. Based upon discussions following patches are dropped in this version: Exynos: Add CONFIG_EXYNOS4 Macro to EXYNOS4 based boards Exynos: Clock.c: Replace exynos4 prefix with exynos SMDK5250: enable device tree support is squashed with EXYNOS: Add SMDK5250 board support Chander Kashyap (4): Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro ARM: EXYNOS: Add support for Exynos5 based SoCs EXYNOS: Add SMDK5250 board support EXYNOS: SMDK5250: Add MMC SPL support MAINTAINERS | 1 + arch/arm/cpu/armv7/exynos/clock.c | 214 +++++++++++- arch/arm/include/asm/arch-exynos/clock.h | 326 ++++++++++++++++++ arch/arm/include/asm/arch-exynos/cpu.h | 35 ++- arch/arm/include/asm/arch-exynos/dmc.h | 146 ++++++++ arch/arm/include/asm/arch-exynos/gpio.h | 99 +++++- arch/arm/include/asm/arch-exynos/tzpc.h | 52 +++ board/samsung/smdk5250/Makefile | 67 ++++ board/samsung/smdk5250/clock_init.c | 202 +++++++++++ board/samsung/smdk5250/dmc_init.c | 453 +++++++++++++++++++++++++ board/samsung/smdk5250/lowlevel_init.S | 96 ++++++ board/samsung/smdk5250/mmc_boot.c | 58 ++++ board/samsung/smdk5250/setup.h | 448 ++++++++++++++++++++++++ board/samsung/smdk5250/smdk5250.c | 146 ++++++++ board/samsung/smdk5250/tools/mkexynos_image.c | 117 +++++++ board/samsung/smdk5250/tzpc_init.c | 48 +++ boards.cfg | 1 + include/configs/s5pc210_universal.h | 1 + include/configs/smdk5250.h | 197 +++++++++++ include/configs/trats.h | 1 + 20 files changed, 2691 insertions(+), 17 deletions(-) create mode 100644 arch/arm/include/asm/arch-exynos/dmc.h create mode 100644 arch/arm/include/asm/arch-exynos/tzpc.h create mode 100644 board/samsung/smdk5250/Makefile create mode 100644 board/samsung/smdk5250/clock_init.c create mode 100644 board/samsung/smdk5250/dmc_init.c create mode 100644 board/samsung/smdk5250/lowlevel_init.S create mode 100644 board/samsung/smdk5250/mmc_boot.c create mode 100644 board/samsung/smdk5250/setup.h create mode 100644 board/samsung/smdk5250/smdk5250.c create mode 100644 board/samsung/smdk5250/tools/mkexynos_image.c create mode 100644 board/samsung/smdk5250/tzpc_init.c create mode 100644 include/configs/smdk5250.h -- 1.7.5.4

13 years, 10 months

[PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM

by Dmitry Antipov

Generalize CONFIG_IRQ_TIME_ACCOUNTING between X86 and ARM, move "noirqtime=" option to common debugging code. For a bit of backward compatibility, "tsc=noirqtime" is preserved, but issues a warning. Suggested-by: Venki Pallipadi <venki(a)google.com> Signed-off-by: Dmitry Antipov <dmitry.antipov(a)linaro.org> --- arch/arm/kernel/sched_clock.c | 3 +++ arch/x86/Kconfig | 11 ----------- arch/x86/kernel/tsc.c | 7 ++++--- include/linux/sched.h | 2 ++ lib/Kconfig.debug | 12 ++++++++++++ lib/Makefile | 2 ++ lib/irqtime.c | 12 ++++++++++++ 7 files changed, 35 insertions(+), 14 deletions(-) create mode 100644 lib/irqtime.c diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 5416c7c..56d2a9d 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -162,5 +162,8 @@ void __init sched_clock_postinit(void) if (read_sched_clock == jiffy_sched_clock_read) setup_sched_clock(jiffy_sched_clock_read, 32, HZ); + if (!no_sched_irq_time) + enable_sched_clock_irqtime(); + sched_clock_poll(sched_clock_timer.data); } diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5bed94e..4759676 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -805,17 +805,6 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. -config IRQ_TIME_ACCOUNTING - bool "Fine granularity task level IRQ time accounting" - default n - ---help--- - Select this option to enable fine granularity task irq time - accounting. This is done by reading a timestamp on each - transitions between softirq and hardirq state, so there can be a - small performance impact. - - If in doubt, say N here. - source "kernel/Kconfig.preempt" config X86_UP_APIC diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index a62c201..70510a3 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -103,14 +103,15 @@ int __init notsc_setup(char *str) __setup("notsc", notsc_setup); -static int no_sched_irq_time; - static int __init tsc_setup(char *str) { if (!strcmp(str, "reliable")) tsc_clocksource_reliable = 1; - if (!strncmp(str, "noirqtime", 9)) + if (!strncmp(str, "noirqtime", 9)) { + printk(KERN_WARNING "tsc: tsc=noirqtime is " + "obsolete, use noirqtime instead\n"); no_sched_irq_time = 1; + } return 1; } diff --git a/include/linux/sched.h b/include/linux/sched.h index 7d379a6..b3575b5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1966,9 +1966,11 @@ extern void sched_clock_idle_wakeup_event(u64 delta_ns); * The reason for this explicit opt-in is not to have perf penalty with * slow sched_clocks. */ +extern int no_sched_irq_time; extern void enable_sched_clock_irqtime(void); extern void disable_sched_clock_irqtime(void); #else +#define no_sched_irq_time 1 static inline void enable_sched_clock_irqtime(void) {} static inline void disable_sched_clock_irqtime(void) {} #endif diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 8745ac7..48be210 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -299,6 +299,18 @@ config SCHEDSTATS application, you can say N to avoid the very slight overhead this adds. +config IRQ_TIME_ACCOUNTING + bool "Fine granularity task level IRQ time accounting" + depends on (X86 || (ARM && HAVE_SCHED_CLOCK)) + default n + ---help--- + Select this option to enable fine granularity task irq time + accounting. This is done by reading a timestamp on each + transitions between softirq and hardirq state, so there can be a + small performance impact. + + If in doubt, say N here. + config TIMER_STATS bool "Collect kernel timers statistics" depends on DEBUG_KERNEL && PROC_FS diff --git a/lib/Makefile b/lib/Makefile index 18515f0..44d67d4 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -49,6 +49,8 @@ obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o obj-$(CONFIG_DEBUG_LIST) += list_debug.o obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o +obj-$(CONFIG_IRQ_TIME_ACCOUNTING) += irqtime.o + ifneq ($(CONFIG_HAVE_DEC_LOCK),y) lib-y += dec_and_lock.o endif diff --git a/lib/irqtime.c b/lib/irqtime.c new file mode 100644 index 0000000..10d440d --- /dev/null +++ b/lib/irqtime.c @@ -0,0 +1,12 @@ +#include <linux/kernel.h> +#include <linux/sched.h> + +int no_sched_irq_time; + +static int __init irqtime_setup(char *str) +{ + no_sched_irq_time = 1; + return 1; +} + +__setup("noirqtime", irqtime_setup); -- 1.7.7.6

13 years, 10 months

[PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM

by Dmitry Antipov

Generalize CONFIG_IRQ_TIME_ACCOUNTING between X86 and ARM, move "noirqtime=" option to common debugging code. For a bit of backward compatibility, X86-specific option "tsc=noirqtime" is preserved, but issues a warning. Suggested-by: Russell King <rmk+kernel(a)arm.linux.org.uk> Suggested-by: Venki Pallipadi <venki(a)google.com> Signed-off-by: Dmitry Antipov <dmitry.antipov(a)linaro.org> --- Documentation/kernel-parameters.txt | 9 +++++---- arch/arm/kernel/sched_clock.c | 3 +++ arch/x86/Kconfig | 11 ----------- arch/x86/kernel/tsc.c | 7 ++++--- include/linux/sched.h | 2 ++ lib/Kconfig.debug | 12 ++++++++++++ lib/Makefile | 2 ++ lib/irqtime.c | 12 ++++++++++++ 8 files changed, 40 insertions(+), 18 deletions(-) create mode 100644 lib/irqtime.c diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 033d4e6..b64a13f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1719,6 +1719,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. noautogroup Disable scheduler automatic task group creation. + noirqtime [X86,ARM] Used to run time disable IRQ_TIME_ACCOUNTING, + should give a negligible performance improvement. + nobats [PPC] Do not use BATs for mapping kernel lowmem on "Classic" PPC cores. @@ -2636,10 +2639,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. as the stability checks done at bootup. Used to enable high-resolution timer mode on older hardware, and in virtualized environment. - [x86] noirqtime: Do not use TSC to do irq accounting. - Used to run time disable IRQ_TIME_ACCOUNTING on any - platforms where RDTSC is slow and this accounting - can add overhead. + [x86] noirqtime: obsoleted by "noirqtime" generic option, + see it's documentation for details. turbografx.map[2|3]= [HW,JOY] TurboGraFX parallel port interface diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 5416c7c..961bd2d 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -144,6 +144,9 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) */ cd.epoch_ns = 0; + if (!no_sched_irq_time) + enable_sched_clock_irqtime(); + pr_debug("Registered %pF as sched_clock source\n", read); } diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5bed94e..4759676 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -805,17 +805,6 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. -config IRQ_TIME_ACCOUNTING - bool "Fine granularity task level IRQ time accounting" - default n - ---help--- - Select this option to enable fine granularity task irq time - accounting. This is done by reading a timestamp on each - transitions between softirq and hardirq state, so there can be a - small performance impact. - - If in doubt, say N here. - source "kernel/Kconfig.preempt" config X86_UP_APIC diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index a62c201..70510a3 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -103,14 +103,15 @@ int __init notsc_setup(char *str) __setup("notsc", notsc_setup); -static int no_sched_irq_time; - static int __init tsc_setup(char *str) { if (!strcmp(str, "reliable")) tsc_clocksource_reliable = 1; - if (!strncmp(str, "noirqtime", 9)) + if (!strncmp(str, "noirqtime", 9)) { + printk(KERN_WARNING "tsc: tsc=noirqtime is " + "obsolete, use noirqtime instead\n"); no_sched_irq_time = 1; + } return 1; } diff --git a/include/linux/sched.h b/include/linux/sched.h index 7d379a6..b3575b5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1966,9 +1966,11 @@ extern void sched_clock_idle_wakeup_event(u64 delta_ns); * The reason for this explicit opt-in is not to have perf penalty with * slow sched_clocks. */ +extern int no_sched_irq_time; extern void enable_sched_clock_irqtime(void); extern void disable_sched_clock_irqtime(void); #else +#define no_sched_irq_time 1 static inline void enable_sched_clock_irqtime(void) {} static inline void disable_sched_clock_irqtime(void) {} #endif diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 8745ac7..236e814 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -299,6 +299,18 @@ config SCHEDSTATS application, you can say N to avoid the very slight overhead this adds. +config IRQ_TIME_ACCOUNTING + bool "Fine granularity task level IRQ time accounting" + depends on X86 || ARM + default n + ---help--- + Select this option to enable fine granularity task irq time + accounting. This is done by reading a timestamp on each + transitions between softirq and hardirq state, so there can be a + small performance impact. + + If in doubt, say N here. + config TIMER_STATS bool "Collect kernel timers statistics" depends on DEBUG_KERNEL && PROC_FS diff --git a/lib/Makefile b/lib/Makefile index 18515f0..44d67d4 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -49,6 +49,8 @@ obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o obj-$(CONFIG_DEBUG_LIST) += list_debug.o obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o +obj-$(CONFIG_IRQ_TIME_ACCOUNTING) += irqtime.o + ifneq ($(CONFIG_HAVE_DEC_LOCK),y) lib-y += dec_and_lock.o endif diff --git a/lib/irqtime.c b/lib/irqtime.c new file mode 100644 index 0000000..10d440d --- /dev/null +++ b/lib/irqtime.c @@ -0,0 +1,12 @@ +#include <linux/kernel.h> +#include <linux/sched.h> + +int no_sched_irq_time; + +static int __init irqtime_setup(char *str) +{ + no_sched_irq_time = 1; + return 1; +} + +__setup("noirqtime", irqtime_setup); -- 1.7.7.6

13 years, 10 months

[PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM

by Dmitry Antipov

Generalize CONFIG_IRQ_TIME_ACCOUNTING between X86 and ARM, move "noirqtime=" option to common debugging code. For a bit of backward compatibility, X86-specific option "tsc=noirqtime" is preserved, but issues a warning. Suggested-by: Russell King <rmk+kernel(a)arm.linux.org.uk> Suggested-by: Venki Pallipadi <venki(a)google.com> Signed-off-by: Dmitry Antipov <dmitry.antipov(a)linaro.org> --- arch/arm/kernel/sched_clock.c | 3 +++ arch/x86/Kconfig | 11 ----------- arch/x86/kernel/tsc.c | 7 ++++--- include/linux/sched.h | 2 ++ lib/Kconfig.debug | 12 ++++++++++++ lib/Makefile | 2 ++ lib/irqtime.c | 12 ++++++++++++ 7 files changed, 35 insertions(+), 14 deletions(-) create mode 100644 lib/irqtime.c diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 5416c7c..961bd2d 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -144,6 +144,9 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) */ cd.epoch_ns = 0; + if (!no_sched_irq_time) + enable_sched_clock_irqtime(); + pr_debug("Registered %pF as sched_clock source\n", read); } diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5bed94e..4759676 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -805,17 +805,6 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. -config IRQ_TIME_ACCOUNTING - bool "Fine granularity task level IRQ time accounting" - default n - ---help--- - Select this option to enable fine granularity task irq time - accounting. This is done by reading a timestamp on each - transitions between softirq and hardirq state, so there can be a - small performance impact. - - If in doubt, say N here. - source "kernel/Kconfig.preempt" config X86_UP_APIC diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index a62c201..70510a3 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -103,14 +103,15 @@ int __init notsc_setup(char *str) __setup("notsc", notsc_setup); -static int no_sched_irq_time; - static int __init tsc_setup(char *str) { if (!strcmp(str, "reliable")) tsc_clocksource_reliable = 1; - if (!strncmp(str, "noirqtime", 9)) + if (!strncmp(str, "noirqtime", 9)) { + printk(KERN_WARNING "tsc: tsc=noirqtime is " + "obsolete, use noirqtime instead\n"); no_sched_irq_time = 1; + } return 1; } diff --git a/include/linux/sched.h b/include/linux/sched.h index 7d379a6..b3575b5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1966,9 +1966,11 @@ extern void sched_clock_idle_wakeup_event(u64 delta_ns); * The reason for this explicit opt-in is not to have perf penalty with * slow sched_clocks. */ +extern int no_sched_irq_time; extern void enable_sched_clock_irqtime(void); extern void disable_sched_clock_irqtime(void); #else +#define no_sched_irq_time 1 static inline void enable_sched_clock_irqtime(void) {} static inline void disable_sched_clock_irqtime(void) {} #endif diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 8745ac7..236e814 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -299,6 +299,18 @@ config SCHEDSTATS application, you can say N to avoid the very slight overhead this adds. +config IRQ_TIME_ACCOUNTING + bool "Fine granularity task level IRQ time accounting" + depends on X86 || ARM + default n + ---help--- + Select this option to enable fine granularity task irq time + accounting. This is done by reading a timestamp on each + transitions between softirq and hardirq state, so there can be a + small performance impact. + + If in doubt, say N here. + config TIMER_STATS bool "Collect kernel timers statistics" depends on DEBUG_KERNEL && PROC_FS diff --git a/lib/Makefile b/lib/Makefile index 18515f0..44d67d4 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -49,6 +49,8 @@ obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o obj-$(CONFIG_DEBUG_LIST) += list_debug.o obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o +obj-$(CONFIG_IRQ_TIME_ACCOUNTING) += irqtime.o + ifneq ($(CONFIG_HAVE_DEC_LOCK),y) lib-y += dec_and_lock.o endif diff --git a/lib/irqtime.c b/lib/irqtime.c new file mode 100644 index 0000000..10d440d --- /dev/null +++ b/lib/irqtime.c @@ -0,0 +1,12 @@ +#include <linux/kernel.h> +#include <linux/sched.h> + +int no_sched_irq_time; + +static int __init irqtime_setup(char *str) +{ + no_sched_irq_time = 1; + return 1; +} + +__setup("noirqtime", irqtime_setup); -- 1.7.7.6

13 years, 10 months

Using oprofile on Panda

by Dmitry Antipov

Are there up-to-date instructions on how to bring up oprofile on panda board? I tried a lot of things found in oprofile manual and google results, but the only thing I have is: $ opreport error: no sample files found: profile specification too strict ? Dmitry

13 years, 10 months

FSL Android Bluetooth Support

by Tommy

Hi,Linaro-dev List,I want to know if FSL Android release have support Bluetooth Whole Profile,not only A2DP,AVRCP,OPP,PABP, HID,FTP,HeadSet,HANDSFREE,and HDP and etc? Whats Status?Thanks! -- Best Regards Embedded Linux Software Developer in China In theory, there is no difference between theory and practice. But, in practice, there is. Follow me: Sina WeiBo:http://weibo.com/hongjiujin Linkedin:http://cn.linkedin.com/in/hongjiujin Email: Tommy.hong@Nanjing(hongjiujing@126.com)

13 years, 10 months

PPP synch and async

by Etienne Le Sueur

Hi Linaro-dev list, I'm trying to set up my Pandaboard as a small server using a 3G USB dongle. I'm trying to set up a PPP connection to my provider, but pppd is complaining: "Couldn't set tty to PPP discipline: Invalid argument" My google-foo tells me that this could be the result of some disabled kernel configs, speficially PPP_ASYNC and PPP_SYNC_TTY - http://lists.debian.org/debian-user/2002/09/msg01810.html linaro@linarotv-xbmc:/etc/ppp$ grep "PPP" /boot/config-3.1.1-8-linaro-lt-omap CONFIG_PPP=m # CONFIG_PPPOE is not set # CONFIG_PPP_ASYNC is not set # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_FILTER is not set # CONFIG_PPP_MPPE is not set # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_SYNC_TTY is not set linaro@linarotv-xbmc:/etc/ppp$ uname -a Linux linarotv-xbmc 3.1.1-8-linaro-lt-omap #8~lt~ci~20120118001257+025756-Ubuntu SMP PREEMPT Thu Jan 19 09: armv7l armv7l armv7l GNU/Linux Would it be possible to enable these config options in the nightly build so I can try with a new kernel tomorrow? Otherwise I can spend the time to build my own kernel and report back if that's the route you'd rather take. Cheers, Etienne Le Sueur

13 years, 10 months

[PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM

by Dmitry Antipov

Generalize CONFIG_IRQ_TIME_ACCOUNTING between X86 and ARM, move "noirqtime=" option to common debugging code. Signed-off-by: Dmitry Antipov <dmitry.antipov(a)linaro.org> --- arch/arm/kernel/sched_clock.c | 3 +++ arch/x86/Kconfig | 11 ----------- arch/x86/kernel/tsc.c | 4 ---- include/linux/sched.h | 2 ++ lib/Kconfig.debug | 12 ++++++++++++ lib/Makefile | 2 ++ lib/irqtime.c | 12 ++++++++++++ 7 files changed, 31 insertions(+), 15 deletions(-) create mode 100644 lib/irqtime.c diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 5416c7c..56d2a9d 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -162,5 +162,8 @@ void __init sched_clock_postinit(void) if (read_sched_clock == jiffy_sched_clock_read) setup_sched_clock(jiffy_sched_clock_read, 32, HZ); + if (!no_sched_irq_time) + enable_sched_clock_irqtime(); + sched_clock_poll(sched_clock_timer.data); } diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5bed94e..4759676 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -805,17 +805,6 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. -config IRQ_TIME_ACCOUNTING - bool "Fine granularity task level IRQ time accounting" - default n - ---help--- - Select this option to enable fine granularity task irq time - accounting. This is done by reading a timestamp on each - transitions between softirq and hardirq state, so there can be a - small performance impact. - - If in doubt, say N here. - source "kernel/Kconfig.preempt" config X86_UP_APIC diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index a62c201..a3a5465 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -103,14 +103,10 @@ int __init notsc_setup(char *str) __setup("notsc", notsc_setup); -static int no_sched_irq_time; - static int __init tsc_setup(char *str) { if (!strcmp(str, "reliable")) tsc_clocksource_reliable = 1; - if (!strncmp(str, "noirqtime", 9)) - no_sched_irq_time = 1; return 1; } diff --git a/include/linux/sched.h b/include/linux/sched.h index 7d379a6..b3575b5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1966,9 +1966,11 @@ extern void sched_clock_idle_wakeup_event(u64 delta_ns); * The reason for this explicit opt-in is not to have perf penalty with * slow sched_clocks. */ +extern int no_sched_irq_time; extern void enable_sched_clock_irqtime(void); extern void disable_sched_clock_irqtime(void); #else +#define no_sched_irq_time 1 static inline void enable_sched_clock_irqtime(void) {} static inline void disable_sched_clock_irqtime(void) {} #endif diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 8745ac7..a55287e 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -299,6 +299,18 @@ config SCHEDSTATS application, you can say N to avoid the very slight overhead this adds. +config IRQ_TIME_ACCOUNTING + bool "Fine granularity task level IRQ time accounting" + depends on DEBUG_KERNEL && (X86 || (ARM && HAVE_SCHED_CLOCK)) + default n + ---help--- + Select this option to enable fine granularity task irq time + accounting. This is done by reading a timestamp on each + transitions between softirq and hardirq state, so there can be a + small performance impact. + + If in doubt, say N here. + config TIMER_STATS bool "Collect kernel timers statistics" depends on DEBUG_KERNEL && PROC_FS diff --git a/lib/Makefile b/lib/Makefile index 18515f0..44d67d4 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -49,6 +49,8 @@ obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o obj-$(CONFIG_DEBUG_LIST) += list_debug.o obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o +obj-$(CONFIG_IRQ_TIME_ACCOUNTING) += irqtime.o + ifneq ($(CONFIG_HAVE_DEC_LOCK),y) lib-y += dec_and_lock.o endif diff --git a/lib/irqtime.c b/lib/irqtime.c new file mode 100644 index 0000000..10d440d --- /dev/null +++ b/lib/irqtime.c @@ -0,0 +1,12 @@ +#include <linux/kernel.h> +#include <linux/sched.h> + +int no_sched_irq_time; + +static int __init irqtime_setup(char *str) +{ + no_sched_irq_time = 1; + return 1; +} + +__setup("noirqtime", irqtime_setup); -- 1.7.7.6

13 years, 10 months

[REMINDER] Linaro 12.02 release dates and deliveries

by David Zinman

Greetings, Hope everyone is enjoying connect so far. This is a reminder for the coming release dates: * Linaro 12.02 Toolchain WG release February 9, 2012. * Linaro 12.02 Platform/WGs/LTs is February 16, 2012. * Linaro 12.02 Release Candidate is February 20, 2012. * Linaro 12.02 Release images is February 23, 2012. * Linaro 12.02 release is UTC 16:00, February 23, 2012. The release calendar for this cycle can be found here: https://wiki.linaro.org/Cycles/1202/Release/Calendar -- David Zinman Linaro Release Manager | Project Manager Linaro.org | Open source software for ARM SoCs

13 years, 10 months

[RFC PATCH 0/2] thermal: Add generic cpu cooling devices according to thermal framework

by Amit Daniel Kachhap

PATCH 1) [thermal: Add a new trip type to use cooling device instance number] This patch adds a new trip type THERMAL_TRIP_STATE_ACTIVE which passes cooling device instance number and may be helpful for cpufreq cooling devices to take the correct cooling action. PATCH 2) [thermal: Add generic cpu cooling implementation] This patch adds generic cpu cooling low level implementation through frequency clipping and cpu hotplug. In future, other cpu related cooling devices may be added here. An ACPI version of this already exists(drivers/acpi/processor_thermal.c). But this will be useful for platforms like ARM using the generic thermal interface along with the generic cpu cooling devices. The cooling device registration API's return cooling device pointers which can be easily binded with the thermal zone trip points. Amit Daniel Kachhap (2): thermal: Add a new trip type to use cooling device instance number thermal: Add generic cpu cooling implementation Documentation/thermal/cpu-cooling-api.txt | 52 +++++ Documentation/thermal/sysfs-api.txt | 4 +- drivers/thermal/Kconfig | 11 + drivers/thermal/Makefile | 1 + drivers/thermal/cpu_cooling.c | 302 +++++++++++++++++++++++++++++ drivers/thermal/thermal_sys.c | 27 +++- include/linux/cpu_cooling.h | 45 +++++ include/linux/thermal.h | 1 + 8 files changed, 440 insertions(+), 3 deletions(-) create mode 100644 Documentation/thermal/cpu-cooling-api.txt create mode 100644 drivers/thermal/cpu_cooling.c create mode 100644 include/linux/cpu_cooling.h

13 years, 10 months

← Newer
1
...
8
9
10
11
12
13
14
15
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev February 2012