linaro-dev July 2012

linaro-dev@lists.linaro.org

77 participants
80 discussions

by David Cullen

Hello, linaro-dev, When I boot the Ubuntu desktop image available from http://releases.linaro.org/12.06/ubuntu/leb-panda/lt-panda-x11-base_2012062… all I see is a black screen and the mouse pointer. I see some messages on the console like [ 13.996887] (stk) : timed out waiting for ldisc to be un-installed [ 15.145019] (stk) :ldisc installation timeout and [ 22.983459] omap-hdmi-audio-dai omap-hdmi-audio-dai: audio not supported [ 22.990631] omap-hdmi-audio-dai omap-hdmi-audio-dai: can't open interface omap-hdmi-audio-dai: -19 My PandaBoard is connected to a Dell monitor with a native resolution of 1680 x 1050. Is this a problem? -- Thank you, David

12 years

[PATCH] arm: Handle device tree memory regions larger than 4GB

by Peter Maydell

Device tree memory regions may have sizes larger than 4GB. Instead of silently truncating a 64 bit size when we pass it to arm_add_memory(), split large regions into 2GB chunks. Signed-off-by: Peter Maydell <peter.maydell(a)linaro.org> --- With this patch, I can take a device tree which has been tweaked so its #address-cells and #size-cells are both 2, and boot it on a QEMU vexpress-a15 model with >4GB of RAM, and have the kernel actually detect the right amount of RAM. [the qemu bit needs some patches I haven't posted yet.] Since I'm not really a kernel dev I thought I'd post this to linaro-dev first in the hope of a bit of friendly local review before venturing onto lkml :-) (Apologies to those on cc who got this twice because I mistyped the linaro-dev email address.) arch/arm/kernel/devtree.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index bee7f9d..79a6e66 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -26,6 +26,11 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) { + while (size > 0x80000000) { + arm_add_memory(base, 0x80000000); + base += 0x80000000; + size -= 0x80000000; + } arm_add_memory(base, size); } -- 1.7.9.5

12 years

perf sched replay again

by Dmitry Antipov

I remember that this was rejected some time ago. Nevertheless, is it possible to accept this until we will have a better solution? Dmitry

12 years

[PATCH 1/2] make v3.4-rc3 run on snowball

by hongbo.zhang

From: "hongbo.zhang" <hongbo.zhang(a)stericsson.com> --- arch/arm/configs/u8500_defconfig | 2 ++ drivers/power/Makefile | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 889d73a..4dc11da 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -99,6 +99,8 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_LBDAF=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y diff --git a/drivers/power/Makefile b/drivers/power/Makefile index b6b2434..e642e1c 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o -obj-$(CONFIG_AB8500_BM) += ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o +#obj-$(CONFIG_AB8500_BM) += ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o -- 1.7.10

12 years

Finding the required Kernel Source

by Sudhangathan B S

Hi, I need to re-compile 3.0.0-1002.3 linaro omap kernel to include MADC drivers. The reason is that the linaro-m 11.07 release uses this kernel, and I need to add MADC driver to the 11.07 release... Where can I find 3.0.0-1002.3 linaro omap kernel...??? I use overo-fire. Any suggestion on which release should I use to include the MADC drivers.... Has anyone successfully compiled kernel after enabling flags in .config file...?? Which release did you use.. and which version of kernel did you compile..?? --------------------------------- Sudhangathan BS Ph:(+91) 9731-905-205 ---------------------------------

12 years

Wrote https://wiki.linaro.org/Platform/Android/CreateABuildOnAndroidBuild

by Zach Pfeffer

In case you need tell someone how to make builds at android-build.linaro.org. -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

12 years

[PATCH 1/2] mfd: Add Freescale's PMIC MC34708 support

by Ying-Chun Liu (PaulLiu)

From: "Ying-Chun Liu (PaulLiu)" <paul.liu(a)linaro.org> Freescale MC34708 is a PMIC which supports the following features: * 6 multi-mode buck regulators * Boost regulator for USB OTG. * 8 regulators for thermal budget optimization * 10-bit ADC * Real time clock Signed-off-by: Robin Gong <B38343(a)freescale.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu(a)linaro.org> Cc: Samuel Ortiz <sameo(a)linux.intel.com> Cc: Mark Brown <broonie(a)opensource.wolfsonmicro.com> Cc: Shawn Guo <shawn.guo(a)linaro.org> --- Documentation/devicetree/bindings/mfd/mc34708.txt | 61 ++ drivers/mfd/Kconfig | 11 + drivers/mfd/Makefile | 1 + drivers/mfd/mc34708-core.c | 634 +++++++++++++++++++++ include/linux/mfd/mc34708.h | 134 +++++ 5 files changed, 841 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/mc34708.txt create mode 100644 drivers/mfd/mc34708-core.c create mode 100644 include/linux/mfd/mc34708.h diff --git a/Documentation/devicetree/bindings/mfd/mc34708.txt b/Documentation/devicetree/bindings/mfd/mc34708.txt new file mode 100644 index 0000000..2bb5c9e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mc34708.txt @@ -0,0 +1,61 @@ +* Freescale MC34708 Power Management Integrated Circuit (PMIC) + +Required properties: +- compatible : Must be "fsl,mc34708" + +Optional properties: +- fsl,mc34708-uses-adc : Indicate the ADC is being used +- fsl,mc34708-uses-rtc : Indicate the RTC is being used +- fsl,mc34708-uses-ts : Indicate the touchscreen controller is being used + +Sub-nodes: +- regulators : Contain the regulator nodes. The MC34708 regulators are + bound using their names as listed below for enabling. + + mc34708__sw1a : regulator SW1A + mc34708__sw1b : regulator SW1B + mc34708__sw2 : regulator SW2 + mc34708__sw3 : regulator SW3 + mc34708__sw4A : regulator SW4A + mc34708__sw4b : regulator SW4B + mc34708__swbst : regulator SWBST + mc34708__vpll : regulator VPLL + mc34708__vrefddr : regulator VREFDDR + mc34708__vusb : regulator VUSB + mc34708__vusb2 : regulator VUSB2 + mc34708__vdac : regulator VDAC + mc34708__vgen1 : regulator VGEN1 + mc34708__vgen2 : regulator VGEN2 + + The bindings details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + +Examples: + +i2c@63fc8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + reg = <0x63fc8000 0x4000>; + interrupts = <62>; + status = "okay"; + + pmic: mc34708@8 { + compatible = "fsl,mc34708"; + reg = <0x08>; + + regulators { + mc34708__sw1a { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1437500>; + regulator-boot-on; + regulator-always-on; + }; + + mc34708__vusb { + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 29f463c..17b6cc5 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -600,6 +600,17 @@ config MFD_MC13XXX additional drivers must be enabled in order to use the functionality of the device. +config MFD_MC34708 + tristate "Support for Freescale's PMIC MC34708" + depends on I2C + depends on OF + select MFD_CORE + help + Support for the Freescale's PMIC MC34708 + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config ABX500_CORE bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" default y if ARCH_U300 || ARCH_U8500 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 05fa538..b98d943 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_TWL6030_PWM) += twl6030-pwm.o obj-$(CONFIG_TWL6040_CORE) += twl6040-core.o twl6040-irq.o obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o +obj-$(CONFIG_MFD_MC34708) += mc34708-core.o obj-$(CONFIG_MFD_CORE) += mfd-core.o diff --git a/drivers/mfd/mc34708-core.c b/drivers/mfd/mc34708-core.c new file mode 100644 index 0000000..54f469b --- /dev/null +++ b/drivers/mfd/mc34708-core.c @@ -0,0 +1,634 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/mc34708.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_device.h> + +struct mc34708 { + struct i2c_client *i2c_client; + struct mutex lock; + int irq; + + irq_handler_t irqhandler[MC34708_NUM_IRQ]; + void *irqdata[MC34708_NUM_IRQ]; +}; + +/*! + * This is the enumeration of versions of PMIC + */ +enum mc34708_id { + MC_PMIC_ID_MC34708, + MC_PMIC_ID_INVALID, +}; + +struct mc34708_version_t { + /*! + * PMIC version identifier. + */ + enum mc34708_id id; + /*! + * Revision of the PMIC. + */ + int revision; +}; + +#define PMIC_I2C_RETRY_TIMES 10 + +static const struct i2c_device_id mc34708_device_id[] = { + {"mc34708", MC_PMIC_ID_MC34708}, + {}, +}; + +static const char * const mc34708_chipname[] = { + [MC_PMIC_ID_MC34708] = "mc34708", +}; + +void mc34708_lock(struct mc34708 *mc_pmic) +{ + if (!mutex_trylock(&mc_pmic->lock)) { + dev_dbg(&mc_pmic->i2c_client->dev, "wait for %s from %pf\n", + __func__, __builtin_return_address(0)); + + mutex_lock(&mc_pmic->lock); + } + dev_dbg(&mc_pmic->i2c_client->dev, "%s from %pf\n", + __func__, __builtin_return_address(0)); +} +EXPORT_SYMBOL(mc34708_lock); + +void mc34708_unlock(struct mc34708 *mc_pmic) +{ + dev_dbg(&mc_pmic->i2c_client->dev, "%s from %pf\n", + __func__, __builtin_return_address(0)); + mutex_unlock(&mc_pmic->lock); +} +EXPORT_SYMBOL(mc34708_unlock); + +static int mc34708_i2c_24bit_read(struct i2c_client *client, + unsigned int offset, + unsigned int *value) +{ + unsigned char buf[3]; + int ret; + int i; + + memset(buf, 0, 3); + for (i = 0; i < PMIC_I2C_RETRY_TIMES; i++) { + ret = i2c_smbus_read_i2c_block_data(client, offset, 3, buf); + if (ret == 3) + break; + usleep_range(1000, 1500); + } + + if (ret == 3) { + *value = buf[0] << 16 | buf[1] << 8 | buf[2]; + return ret; + } else { + dev_err(&client->dev, "24bit read error, ret = %d\n", ret); + return -1; /* return -1 on failure */ + } +} + +int mc34708_reg_read(struct mc34708 *mc_pmic, unsigned int offset, + u32 *val) +{ + BUG_ON(!mutex_is_locked(&mc_pmic->lock)); + + if (offset > MC34708_NUMREGS) + return -EINVAL; + + if (mc34708_i2c_24bit_read(mc_pmic->i2c_client, offset, val) == -1) + return -1; + *val &= 0xffffff; + + dev_vdbg(&mc_pmic->i2c_client->dev, "mc_pmic read [%02d] -> 0x%06x\n", + offset, *val); + + return 0; +} +EXPORT_SYMBOL(mc34708_reg_read); + +static int mc34708_i2c_24bit_write(struct i2c_client *client, + unsigned int offset, unsigned int reg_val) +{ + char buf[3]; + int ret; + int i; + + buf[0] = (reg_val >> 16) & 0xff; + buf[1] = (reg_val >> 8) & 0xff; + buf[2] = (reg_val) & 0xff; + + for (i = 0; i < PMIC_I2C_RETRY_TIMES; i++) { + ret = i2c_smbus_write_i2c_block_data(client, offset, 3, buf); + if (ret == 0) + break; + usleep_range(1000, 1500); + } + if (i == PMIC_I2C_RETRY_TIMES) + dev_err(&client->dev, "24bit write error, ret = %d\n", ret); + + return ret; +} + +int mc34708_reg_write(struct mc34708 *mc_pmic, unsigned int offset, u32 val) +{ + BUG_ON(!mutex_is_locked(&mc_pmic->lock)); + + if (offset > MC34708_NUMREGS) + return -EINVAL; + + if (mc34708_i2c_24bit_write(mc_pmic->i2c_client, offset, val)) + return -1; + val &= 0xffffff; + + dev_vdbg(&mc_pmic->i2c_client->dev, "mc_pmic write[%02d] -> 0x%06x\n", + offset, val); + + return 0; +} +EXPORT_SYMBOL(mc34708_reg_write); + +int mc34708_reg_rmw(struct mc34708 *mc_pmic, unsigned int offset, u32 mask, + u32 val) +{ + int ret; + u32 valread; + + BUG_ON(val & ~mask); + + ret = mc34708_reg_read(mc_pmic, offset, &valread); + if (ret) + return ret; + + valread = (valread & ~mask) | val; + + return mc34708_reg_write(mc_pmic, offset, valread); +} +EXPORT_SYMBOL(mc34708_reg_rmw); + +int mc34708_irq_mask(struct mc34708 *mc_pmic, int irq) +{ + int ret; + unsigned int offmask = + irq < 24 ? MC34708_REG_INT_MASK0 : MC34708_REG_INT_MASK1; + u32 irqbit = 1 << (irq < 24 ? irq : irq - 24); + u32 mask; + + if (irq < 0 || irq >= MC34708_NUM_IRQ) + return -EINVAL; + + ret = mc34708_reg_read(mc_pmic, offmask, &mask); + if (ret) + return ret; + + if (mask & irqbit) + /* already masked */ + return 0; + + return mc34708_reg_write(mc_pmic, offmask, mask | irqbit); +} +EXPORT_SYMBOL(mc34708_irq_mask); + +int mc34708_irq_unmask(struct mc34708 *mc_pmic, int irq) +{ + int ret; + unsigned int offmask = + irq < 24 ? MC34708_REG_INT_MASK0 : MC34708_REG_INT_MASK1; + u32 irqbit = 1 << (irq < 24 ? irq : irq - 24); + u32 mask; + + if (irq < 0 || irq >= MC34708_NUM_IRQ) + return -EINVAL; + + ret = mc34708_reg_read(mc_pmic, offmask, &mask); + if (ret) + return ret; + + if (!(mask & irqbit)) + /* already unmasked */ + return 0; + + return mc34708_reg_write(mc_pmic, offmask, mask & ~irqbit); +} +EXPORT_SYMBOL(mc34708_irq_unmask); + +int mc34708_irq_status(struct mc34708 *mc_pmic, int irq, int *enabled, + int *pending) +{ + int ret; + unsigned int offmask = + irq < 24 ? MC34708_REG_INT_MASK0 : MC34708_REG_INT_MASK1; + unsigned int offstat = + irq < 24 ? MC34708_REG_INT_STATUS0 : MC34708_REG_INT_STATUS1; + u32 irqbit = 1 << (irq < 24 ? irq : irq - 24); + + if (irq < 0 || irq >= MC34708_NUM_IRQ) + return -EINVAL; + + if (enabled) { + u32 mask; + + ret = mc34708_reg_read(mc_pmic, offmask, &mask); + if (ret) + return ret; + + *enabled = mask & irqbit; + } + + if (pending) { + u32 stat; + + ret = mc34708_reg_read(mc_pmic, offstat, &stat); + if (ret) + return ret; + + *pending = stat & irqbit; + } + + return 0; +} +EXPORT_SYMBOL(mc34708_irq_status); + +int mc34708_irq_ack(struct mc34708 *mc_pmic, int irq) +{ + unsigned int offstat = + irq < 24 ? MC34708_REG_INT_STATUS0 : MC34708_REG_INT_STATUS1; + unsigned int val = 1 << (irq < 24 ? irq : irq - 24); + + BUG_ON(irq < 0 || irq >= MC34708_NUM_IRQ); + + return mc34708_reg_write(mc_pmic, offstat, val); +} +EXPORT_SYMBOL(mc34708_irq_ack); + +int mc34708_irq_request_nounmask(struct mc34708 *mc_pmic, int irq, + irq_handler_t handler, const char *name, + void *dev) +{ + BUG_ON(!mutex_is_locked(&mc_pmic->lock)); + BUG_ON(!handler); + + if (irq < 0 || irq >= MC34708_NUM_IRQ) + return -EINVAL; + + if (mc_pmic->irqhandler[irq]) + return -EBUSY; + + mc_pmic->irqhandler[irq] = handler; + mc_pmic->irqdata[irq] = dev; + + return 0; +} +EXPORT_SYMBOL(mc34708_irq_request_nounmask); + +int mc34708_irq_request(struct mc34708 *mc_pmic, int irq, + irq_handler_t handler, const char *name, void *dev) +{ + int ret; + + ret = mc34708_irq_request_nounmask(mc_pmic, irq, handler, name, dev); + if (ret) + return ret; + + ret = mc34708_irq_unmask(mc_pmic, irq); + if (ret) { + mc_pmic->irqhandler[irq] = NULL; + mc_pmic->irqdata[irq] = NULL; + return ret; + } + + return 0; +} +EXPORT_SYMBOL(mc34708_irq_request); + +int mc34708_irq_free(struct mc34708 *mc_pmic, int irq, void *dev) +{ + int ret; + BUG_ON(!mutex_is_locked(&mc_pmic->lock)); + + if (irq < 0 || irq >= MC34708_NUM_IRQ || !mc_pmic->irqhandler[irq] || + mc_pmic->irqdata[irq] != dev) + return -EINVAL; + + ret = mc34708_irq_mask(mc_pmic, irq); + if (ret) + return ret; + + mc_pmic->irqhandler[irq] = NULL; + mc_pmic->irqdata[irq] = NULL; + + return 0; +} +EXPORT_SYMBOL(mc34708_irq_free); + +static inline irqreturn_t mc34708_irqhandler(struct mc34708 *mc_pmic, int irq) +{ + return mc_pmic->irqhandler[irq] (irq, mc_pmic->irqdata[irq]); +} + +/* + * returns: number of handled irqs or negative error + * locking: holds mc_pmic->lock + */ +static int mc34708_irq_handle(struct mc34708 *mc_pmic, + unsigned int offstat, unsigned int offmask, + int baseirq) +{ + u32 stat, mask; + int ret = mc34708_reg_read(mc_pmic, offstat, &stat); + int num_handled = 0; + + if (ret) + return ret; + + ret = mc34708_reg_read(mc_pmic, offmask, &mask); + if (ret) + return ret; + + while (stat & ~mask) { + int irq = __ffs(stat & ~mask); + + stat &= ~(1 << irq); + + if (likely(mc_pmic->irqhandler[baseirq + irq])) { + irqreturn_t handled; + + handled = mc34708_irqhandler(mc_pmic, baseirq + irq); + if (handled == IRQ_HANDLED) + num_handled++; + } else { + dev_err(&mc_pmic->i2c_client->dev, + "BUG: irq %u but no handler\n", baseirq + irq); + + mask |= 1 << irq; + + ret = mc34708_reg_write(mc_pmic, offmask, mask); + } + } + + return num_handled; +} + +static irqreturn_t mc34708_irq_thread(int irq, void *data) +{ + struct mc34708 *mc_pmic = data; + irqreturn_t ret; + int handled = 0; + + mc34708_lock(mc_pmic); + + ret = mc34708_irq_handle(mc_pmic, MC34708_REG_INT_STATUS0, + MC34708_REG_INT_MASK0, 0); + if (ret > 0) + handled = 1; + + ret = mc34708_irq_handle(mc_pmic, MC34708_REG_INT_STATUS1, + MC34708_REG_INT_MASK1, 24); + if (ret > 0) + handled = 1; + + mc34708_unlock(mc_pmic); + + return IRQ_RETVAL(handled); +} + +#define maskval(reg, mask) (((reg) & (mask)) >> __ffs(mask)) +static int mc34708_identify(struct mc34708 *mc_pmic, + struct mc34708_version_t *ver) +{ + int rev_id = 0; + int rev1 = 0; + int rev2 = 0; + int finid = 0; + int icid = 0; + int ret; + ret = mc34708_reg_read(mc_pmic, MC34708_REG_IDENTIFICATION, &rev_id); + if (ret) { + dev_dbg(&mc_pmic->i2c_client->dev, "read ID error!%x\n", ret); + return ret; + } + rev1 = (rev_id & 0x018) >> 3; + rev2 = (rev_id & 0x007); + icid = (rev_id & 0x01C0) >> 6; + finid = (rev_id & 0x01E00) >> 9; + ver->id = MC_PMIC_ID_MC34708; + + ver->revision = ((rev1 * 10) + rev2); + dev_dbg(&mc_pmic->i2c_client->dev, + "mc_pmic Rev %d.%d FinVer %x detected\n", rev1, rev2, finid); + + return 0; +} + +static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id, + const struct i2c_client *client) +{ + while (id->name[0]) { + if (strcmp(client->name, id->name) == 0) + return id; + id++; + } + + return NULL; +} + +static const struct i2c_device_id *i2c_get_device_id(const struct i2c_client + *idev) +{ + const struct i2c_driver *idrv = to_i2c_driver(idev->dev.driver); + + return i2c_match_id(idrv->id_table, idev); +} + +static const char *mc34708_get_chipname(struct mc34708 *mc_pmic) +{ + const struct i2c_device_id *devid = + i2c_get_device_id(mc_pmic->i2c_client); + + if (!devid) + return NULL; + + return mc34708_chipname[devid->driver_data]; +} + +int mc34708_get_flags(struct mc34708 *mc_pmic) +{ + struct mc34708_platform_data *pdata = + dev_get_platdata(&mc_pmic->i2c_client->dev); + + return pdata->flags; +} +EXPORT_SYMBOL(mc34708_get_flags); + +static int mc34708_add_subdevice_pdata(struct mc34708 *mc_pmic, + const char *format, void *pdata, + size_t pdata_size) +{ + char buf[30]; + const char *name = mc34708_get_chipname(mc_pmic); + + struct mfd_cell cell = { + .platform_data = pdata, + .pdata_size = pdata_size, + }; + + /* there is no asnprintf in the kernel :-( */ + if (snprintf(buf, sizeof(buf), format, name) > sizeof(buf)) + return -E2BIG; + + cell.name = kmemdup(buf, strlen(buf) + 1, GFP_KERNEL); + if (!cell.name) + return -ENOMEM; + + return mfd_add_devices(&mc_pmic->i2c_client->dev, -1, &cell, 1, NULL, + 0); +} + +static int mc34708_add_subdevice(struct mc34708 *mc_pmic, const char *format) +{ + return mc34708_add_subdevice_pdata(mc_pmic, format, NULL, 0); +} + +static int mc34708_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mc34708 *mc_pmic; + struct mc34708_version_t version; + struct mc34708_platform_data *pdata = client->dev.platform_data; + struct device_node *np = client->dev.of_node; + int ret; + + mc_pmic = kzalloc(sizeof(*mc_pmic), GFP_KERNEL); + if (!mc_pmic) + return -ENOMEM; + i2c_set_clientdata(client, mc_pmic); + mc_pmic->i2c_client = client; + + mutex_init(&mc_pmic->lock); + mc34708_lock(mc_pmic); + mc34708_identify(mc_pmic, &version); + /* mask all irqs */ + ret = mc34708_reg_write(mc_pmic, MC34708_REG_INT_MASK0, 0x00ffffff); + if (ret) + goto err_mask; + + ret = mc34708_reg_write(mc_pmic, MC34708_REG_INT_MASK1, 0x00ffffff); + if (ret) + goto err_mask; + + ret = request_threaded_irq(client->irq, NULL, mc34708_irq_thread, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, "mc_pmic", + mc_pmic); + + if (ret) { + err_mask: + mc34708_unlock(mc_pmic); + dev_set_drvdata(&client->dev, NULL); + kfree(mc_pmic); + return ret; + } + + mc34708_unlock(mc_pmic); + + if (pdata && pdata->flags & MC34708_USE_ADC) + mc34708_add_subdevice(mc_pmic, "%s-adc"); + else if (of_get_property(np, "fsl,mc34708-uses-adc", NULL)) + mc34708_add_subdevice(mc_pmic, "%s-adc"); + + + if (pdata && pdata->flags & MC34708_USE_REGULATOR) { + struct mc34708_regulator_platform_data regulator_pdata = { + .num_regulators = pdata->num_regulators, + .regulators = pdata->regulators, + }; + + mc34708_add_subdevice_pdata(mc_pmic, "%s-regulator", + &regulator_pdata, + sizeof(regulator_pdata)); + } else if (of_find_node_by_name(np, "regulators")) { + mc34708_add_subdevice(mc_pmic, "%s-regulator"); + } + + if (pdata && pdata->flags & MC34708_USE_RTC) + mc34708_add_subdevice(mc_pmic, "%s-rtc"); + else if (of_get_property(np, "fsl,mc34708-uses-rtc", NULL)) + mc34708_add_subdevice(mc_pmic, "%s-rtc"); + + if (pdata && pdata->flags & MC34708_USE_TOUCHSCREEN) + mc34708_add_subdevice(mc_pmic, "%s-ts"); + else if (of_get_property(np, "fsl,mc34708-uses-ts", NULL)) + mc34708_add_subdevice(mc_pmic, "%s-ts"); + + return 0; +} + +static int __devexit mc34708_remove(struct i2c_client *client) +{ + struct mc34708 *mc_pmic = dev_get_drvdata(&client->dev); + + free_irq(mc_pmic->i2c_client->irq, mc_pmic); + + mfd_remove_devices(&client->dev); + + kfree(mc_pmic); + + return 0; +} + +static const struct of_device_id mc34708_dt_ids[] = { + { .compatible = "fsl,mc34708" }, + { /* sentinel */ } +}; + +static struct i2c_driver mc34708_driver = { + .id_table = mc34708_device_id, + .driver = { + .name = "mc34708", + .owner = THIS_MODULE, + .of_match_table = mc34708_dt_ids, + }, + .probe = mc34708_probe, + .remove = __devexit_p(mc34708_remove), +}; + +static int __init mc34708_init(void) +{ + return i2c_add_driver(&mc34708_driver); +} +subsys_initcall(mc34708_init); + +static void __exit mc34708_exit(void) +{ + i2c_del_driver(&mc34708_driver); +} +module_exit(mc34708_exit); + +MODULE_DESCRIPTION("Core driver for Freescale MC34708 PMIC"); +MODULE_AUTHOR("Robin Gong <B38343(a)freescale.com>, " + "Ying-Chun Liu (PaulLiu) <paul.liu(a)linaro.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/mc34708.h b/include/linux/mfd/mc34708.h new file mode 100644 index 0000000..505813d --- /dev/null +++ b/include/linux/mfd/mc34708.h @@ -0,0 +1,134 @@ +/* For mc34708's pmic driver + * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. + * + * based on: + * Copyright 2009-2010 Pengutronix, Uwe Kleine-Koenig + * <u.kleine-koenig(a)pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#ifndef __LINUX_MFD_MC_34708_H +#define __LINUX_MFD_MC_34708_H + +#include <linux/interrupt.h> +#include <linux/regulator/driver.h> + +struct mc34708; + +void mc34708_lock(struct mc34708 *mc_pmic); +void mc34708_unlock(struct mc34708 *mc_pmic); + +int mc34708_reg_read(struct mc34708 *mc_pmic, unsigned int offset, u32 *val); +int mc34708_reg_write(struct mc34708 *mc_pmic, unsigned int offset, u32 val); +int mc34708_reg_rmw(struct mc34708 *mc_pmic, unsigned int offset, + u32 mask, u32 val); + +int mc34708_get_flags(struct mc34708 *mc_pmic); + +int mc34708_irq_request(struct mc34708 *mc_pmic, int irq, + irq_handler_t handler, const char *name, void *dev); +int mc34708_irq_request_nounmask(struct mc34708 *mc_pmic, int irq, + irq_handler_t handler, const char *name, + void *dev); +int mc34708_irq_free(struct mc34708 *mc_pmic, int irq, void *dev); +int mc34708_irq_mask(struct mc34708 *mc_pmic, int irq); +int mc34708_irq_unmask(struct mc34708 *mc_pmic, int irq); +int mc34708_irq_status(struct mc34708 *mc_pmic, int irq, + int *enabled, int *pending); +int mc34708_irq_ack(struct mc34708 *mc_pmic, int irq); + +int mc34708_get_flags(struct mc34708 *mc_pmic); + +#define MC34708_SW1A 0 +#define MC34708_SW1B 1 +#define MC34708_SW2 2 +#define MC34708_SW3 3 +#define MC34708_SW4A 4 +#define MC34708_SW4B 5 +#define MC34708_SW5 6 +#define MC34708_SWBST 7 +#define MC34708_VPLL 8 +#define MC34708_VREFDDR 9 +#define MC34708_VUSB 10 +#define MC34708_VUSB2 11 +#define MC34708_VDAC 12 +#define MC34708_VGEN1 13 +#define MC34708_VGEN2 14 +#define MC34708_REGU_NUM 15 + +#define MC34708_REG_INT_STATUS0 0 +#define MC34708_REG_INT_MASK0 1 +#define MC34708_REG_INT_STATUS1 3 +#define MC34708_REG_INT_MASK1 4 +#define MC34708_REG_IDENTIFICATION 7 + +#define MC34708_IRQ_ADCDONE 0 +#define MC34708_IRQ_TSDONE 1 +#define MC34708_IRQ_TSPENDET 2 +#define MC34708_IRQ_USBDET 3 +#define MC34708_IRQ_AUXDET 4 +#define MC34708_IRQ_USBOVP 5 +#define MC34708_IRQ_AUXOVP 6 +#define MC34708_IRQ_CHRTIMEEXP 7 +#define MC34708_IRQ_BATTOTP 8 +#define MC34708_IRQ_BATTOVP 9 +#define MC34708_IRQ_CHRCMPL 10 +#define MC34708_IRQ_WKVBUSDET 11 +#define MC34708_IRQ_WKAUXDET 12 +#define MC34708_IRQ_LOWBATT 13 +#define MC34708_IRQ_VBUSREGMI 14 +#define MC34708_IRQ_ATTACH 15 +#define MC34708_IRQ_DETACH 16 +#define MC34708_IRQ_KP 17 +#define MC34708_IRQ_LKP 18 +#define MC34708_IRQ_LKR 19 +#define MC34708_IRQ_UKNOW_ATTA 20 +#define MC34708_IRQ_ADC_CHANGE 21 +#define MC34708_IRQ_STUCK_KEY 22 +#define MC34708_IRQ_STUCK_KEY_RCV 23 +#define MC34708_IRQ_1HZ 24 +#define MC34708_IRQ_TODA 25 +#define MC34708_IRQ_UNUSED1 26 +#define MC34708_IRQ_PWRON1 27 +#define MC34708_IRQ_PWRON2 28 +#define MC34708_IRQ_WDIRESET 29 +#define MC34708_IRQ_SYSRST 30 +#define MC34708_IRQ_RTCRST 31 +#define MC34708_IRQ_PCI 32 +#define MC34708_IRQ_WARM 33 +#define MC34708_IRQ_MEMHLD 34 +#define MC34708_IRQ_UNUSED2 35 +#define MC34708_IRQ_THWARNL 36 +#define MC34708_IRQ_THWARNH 37 +#define MC34708_IRQ_CLK 38 +#define MC34708_IRQ_UNUSED3 39 +#define MC34708_IRQ_SCP 40 +#define MC34708_NUMREGS 0x3f +#define MC34708_NUM_IRQ 46 + +struct mc34708_regulator_init_data { + int id; + struct regulator_init_data *init_data; +}; + +struct mc34708_regulator_platform_data { + int num_regulators; + struct mc34708_regulator_init_data *regulators; +}; + +struct mc34708_platform_data { +#define MC34708_USE_TOUCHSCREEN (1 << 0) +#define MC34708_USE_CODEC (1 << 1) +#define MC34708_USE_ADC (1 << 2) +#define MC34708_USE_RTC (1 << 3) +#define MC34708_USE_REGULATOR (1 << 4) +#define MC34708_USE_LED (1 << 5) + unsigned int flags; + + int num_regulators; + struct mc34708_regulator_init_data *regulators; +}; + +#endif /* ifndef __LINUX_MFD_MC_PMIC_H */ -- 1.7.9.5

12 years

Does anybody know how to make Ethernet work on Snowball?

by Hongbo Zhang

Hi all, I am running the Community kernel on Snowball, as far as I know, v3.4-rc3 Ethernet works, but later version such as v3.4-rc6 and v3.5-rc*, the Ethernet doesn't work, does anybody know how to make the Ethernet work? Thanks.

12 years

Re: Black screen when booting Ubuntu

by David Cullen

Hello, linaro-dev, I was able to get the Ubuntu desktop to appear by connecting a 1080p DVI monitor to the "DVI-D" HDMI connector. Is there any documentation on which HDMI connector to use when connecting to different types of displays? Is there any way to pass a different resolution on the kernel command line so that I can get the PandaBoard to work with a 1680x1050 DVI display? -- Thank you, David Cullen

12 years

Android Platform Team 2012/7/4 Agenda Posted

by Zach Pfeffer

See: https://wiki.linaro.org/Platform/Android/Meetings/2012-07-04 Please feel free to add to it. Android team, Please list your status. See everyone tomorrow on #linaro-meeting at 14:00 UTC (8 AM Texas time). We've got more cool stuff to go over. Come, enjoy! -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

12 years

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev July 2012