On Tue, Jan 18, 2011, Per Förlin wrote:
If I mess up the u-boot in my efikamx smart book how can I install a new one? I tried booting with an SD-card image from http://www.powerdeveloper.org/asset/by-id/116. I guess this only works if I have a working u-boot in place.
I don't have the serial/JTAG connector. Is this what I need in order to recover?
There is a series of DIP switches in the back panel (where you plug the debug cable); depending on their positions, the board will boot from SD, micro-SD or from flash. You can create a "replace all my flash contents with a known-good u-boot" SD card with the bits provided by genesi.